HMC232G7 v02.1006 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 6.0 GHz Typical Applications Features The HMC232G7 is ideal for: Isolation: 55 dB @ 2.0 GHz 42 dB @ 6.0 GHz • Telecom Infrastructure Insertion Loss: 1.9 dB Typical @ 6.0 GHz • Microwave Radio & VSAT Non-Reflective Design • Military Radios, Radar & ECM Hermetic Surface Mount Package • Space Systems Direct Replacement for HMC132G7 • Test Instrumentation Functional Diagram General Description The HMC232G7 is a broadband high isolation nonreflective GaAs MESFET SPDT switch in a hermetic surface mount package. Covering DC to 6.0 GHz, the switch features >55 dB isolation up to 2 GHz and >42 dB isolation up to 6.0 GHz. The switch operates using complementary negative control voltage logic lines of -5/0V and requires no bias supply. This product is a form, fit & functional replacement for the HMC132G7. SWITCHES - SMT 9 Electrical Specifications, TA = +25° C, With 0/-5V Control, 50 Ohm System Parameter 9 - 66 Frequency Insertion Loss DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz Isolation DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz Min. 50 41 37 Typ. Max. Units 1.3 1.4 1.9 1.6 1.7 2.3 dB dB dB 55 46 42 dB dB dB Return Loss “On State” DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz 18 17 12 dB dB dB Return Loss RF1, RF2 “Off State” DC - 2.0 GHz DC - 4.0 GHz DC - 6.0 GHz 14 13 11 dB dB dB 27 dBm Input Power for 1 dB Compression 0.5 - 6.0 GHz 23 Input Third Order Intercept (Two-Tone Input Power= +7 dBm Each Tone, 1 MHz Tone Separation) 0.5 - 6.0 GHz 49 dBm Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) DC - 6.0 GHz 3 6 ns ns For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC232G7 v02.1006 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 6.0 GHz Insertion Loss Isolation 0 0 -10 RF1 RF2 -20 ISOLATION (dB) -2 -3 -40 -50 -60 + 25C + 85C - 40C -4 -30 -70 -5 -80 0 1 2 3 4 5 6 0 7 1 2 FREQUENCY (GHz) 4 5 6 7 0.1 and 1 dB Input Compression Point 35 0 RFC RF1, RF2 ON RF1, RF2 OFF 30 INPUT P1dB (dBm) -5 9 FREQUENCY (GHz) Return Loss -10 -15 -20 25 1 dB Compression Point 0.1 dB Compression Point 20 -25 -30 15 0 1 2 3 4 5 6 0 7 1 2 FREQUENCY (GHz) 3 4 5 6 7 FREQUENCY (GHz) Input Third Order Intercept Point 60 55 INPUT IP3 (dBm) RETURN LOSS (dB) 3 SWITCHES - SMT INSERTION LOSS (dB) -1 50 45 + 25C + 85C - 40C 40 35 30 0 1 2 3 4 5 FREQUENCY (GHz) 6 7 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 67 HMC232G7 v02.1006 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 6.0 GHz Absolute Maximum Ratings SWITCHES - SMT 9 RF Input Power (VA, VB = 0/-5V) (0.5 - 6 GHz) +30 dBm (@ +50 °C) Control Voltage Range (A & B) +1.0V to -7.5 Vdc Channel Temperature 150 °C Thermal Resistance (RTH) (junction to lead) 94 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Control Voltages State Bias Condition Low 0 to -0.2V @ 10 uA Max. High -5V @ 10 uA Typ. to -7V @ 45 uA Typ. Truth Table Control Input Signal Path State A B RFC to RF1 RFC to RF2 High Low ON OFF Low High OFF ON Caution: Do not “Hot Switch” power levels greater than +27 dBm (VA, VB = 0/-5V). Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2. CONDUCTOR TRACES MATERIAL: THICK FILM TUNGSTEN. 3. LEAD, BASE, COVER MATERIAL: KOVAR™. 4. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN, OVER ELECTROLYTIC NICKEL 50 MICROINCHES MIN. 5. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 6. TOLERANCES: .±005 [0.13] UNLESS OTHERWISE SPECIFIED. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9 - 68 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC232G7 v02.1006 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 6.0 GHz Suggested Driver Circuit Pin Descriptions Pin Number Function Description 1, 2, 3 RF2, RFC, RF1 This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required if RF line potential is not equal to 0V. 4, 7 GND Package bottom must also be connected to PCB RF ground. 5 A See truth table and control voltage table. 6 B See truth table and control voltage table. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com SWITCHES - SMT 9 9 - 69 HMC232G7 v02.1006 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 6.0 GHz Evaluation PCB SWITCHES - SMT 9 List of Materials for Evaluation PBC 107181 [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J6 DC Pin R1, R2 100 Ohm Resistor, 0603 Pkg. U1 HMC232G7 SPDT Switch PCB [2] 107099 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 9 - 70 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC232G7 v02.1006 GaAs MMIC SMT HIGH ISOLATION SPDT SWITCH, DC - 6.0 GHz Notes: SWITCHES - SMT 9 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 71