Dubilier DBCEJ0359-4T Audio pcb 3.5 earphone jack Datasheet

AUDIO
PCB 3.5Ø EARPHONE JACK
SECTION 6
Competitively priced
Industry Compatible
PCB Mounting or Wire Soldering
Thread mounting option
SPECIFICATION
Contact resistance (DCR 0.1A)
1, Initial, before any testing:
2, After life test with mating plug:
Insertation Force:
Extraction Force:
Soldering Heat:
Operating Temperature range:
Insulating Resistance:
Voltage Test:
Lifetime:
Rated Voltage:
Rated Current:
(1) Between the terminals (NC): 30mΩ
(2) Plug to sleeve, tip ,ring (NO) contact: 50mΩ
(1) Between the terminals (NC): 60mΩ
(2) Plug to sleeve, tip, ring (NO) contact: 100mΩ
0.3kg - 2.0kg
Terminals must withstand a 500g minimum pull for 10 seconds
0.3kg - 2.0kg
before movement or break from housing occurs
Terminal for PC board temperature: 260 ± 5˚C for 5 ± 1.0 seconds
-25˚C to 80˚C
More than 100mΩ by 500v DC at 90 - 95% RH, 40˚C
Withstand 0.5mA 500v AC between any open terminal for one minute
Withstand more than 5000 cycle’s insertion and withdrawal with testing plug
16vdc
20mA - 0.3A
OUTLINE DRAWING
or
M6 THREAD
5.0
ORDERING INFORMATION
DBC
EJ
0359
Dubilier
Connectors
3.5Ø Earphone
Socket
Connector
Series
-2T
Thread
Contacts
Blank = Without
Thread
T = Thread
-2T
-3RT
-3TS
-4R
-4T
--5
146
Fax: 01371 875075
www.dubilier.co.uk
Tel: 01371 875758
Similar pages