6225 POWER INDUCTORS High-Reliability Power Inductors ML486PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit Weight 309 – 331 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 750/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.57 mm pocket depth Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm DCR3 Inductance2 max Part number1 ±20% (µH) (Ohms) ML486PJB122MLZ ML486PJB222MLZ ML486PJB332MLZ ML486PJB472MLZ ML486PJB682MLZ ML486PJB103MLZ ML486PJB153MLZ ML486PJB223MLZ ML486PJB333MLZ ML486PJB473MLZ ML486PJB683MLZ ML486PJB104MLZ ML486PJB124MLZ ML486PJB154MLZ ML486PJB224MLZ ML486PJB334MLZ ML486PJB474MLZ ML486PJB684MLZ ML486PJB105MLZ ML486PJB155MLZ ML486PJB185MLZ ML486PJB225MLZ ML486PJB335MLZ ML486PJB475MLZ ML486PJB565MLZ ML486PJB685MLZ ML486PJB825MLZ ML486PJB106MLZ 1.2 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 220 330 470 680 1000 1500 1800 2200 3300 4700 5600 6800 8200 10000 0.040 0.045 0.055 0.070 0.095 0.105 0.135 0.225 0.260 0.360 0.420 0.610 0.750 0.920 1.30 2.00 2.60 4.00 6.00 9.00 11.7 13.5 21.0 30.0 36.0 43.0 54.0 70.0 ® SRF (MHz)4 min typ 125 70 48 37 28 25 16 12 9.8 7.0 6.7 5.4 4.2 4.5 3.5 2.7 2.2 2.0 1.6 1.3 1.2 0.9 0.8 0.6 0.5 0.5 0.5 0.5 178 100 68 53 40 35 23 17 14 10 9.6 7.7 7.4 6.4 5.0 3.8 3.2 2.8 2.3 1.8 1.7 1.3 1.1 0.90 0.72 0.70 0.69 0.68 Isat (A)5 Irms (A)6 10% 20% 30% 20°C 40°C drop drop drop rise rise 5.3 3.9 3.5 3.0 2.6 2.1 2.1 1.4 1.1 0.98 0.58 0.48 0.42 0.39 0.32 0.26 0.22 0.18 0.15 0.12 0.11 0.10 0.099 0.086 0.077 0.080 0.079 0.050 5.4 4.0 3.5 3.1 2.7 2.1 2.2 1.5 1.2 1.0 0.61 0.51 0.45 0.41 0.34 0.27 0.23 0.19 0.16 0.13 0.12 0.10 0.10 0.096 0.090 0.086 0.086 0.050 0.88 0.80 0.80 0.72 0.72 0.72 0.68 0.64 0.52 0.48 0.46 0.38 0.34 0.32 0.30 0.22 0.19 0.14 0.12 0.10 0.090 0.090 0.065 0.060 0.055 0.050 0.050 0.045 1.3 1.1 1.0 1.0 1.0 1.0 0.96 0.88 0.72 0.64 0.59 0.51 0.46 0.43 0.40 0.31 0.30 0.21 0.19 0.16 0.11 0.10 0.090 0.070 0.070 0.060 0.060 0.050 ML486PJB106MLZ Testing: Z = COTS H = Screening per Coilcraft CP‑SA-10001 N = Screening per Coilcraft CP‑SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current that causes the specified inductance drop from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 5.4 4.1 3.6 3.2 2.8 2.2 2.2 1.6 1.2 1.0 0.62 0.52 0.46 0.42 0.35 0.28 0.24 0.20 0.17 0.13 0.12 0.11 0.11 0.10 0.096 0.089 0.088 0.060 1. When ordering, please specify testing code: Document ML554-1 Phone 800-981-0363 Fax 847-639-1508 Revised 03/28/11 E-mail [email protected] Web www.coilcraft-cps.com 6225 POWER INDUCTORS ML486PJB Series (6225) Typical L vs Current Typical L vs Frequency 10000 10000 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 1000 µH 1000 Inductance (µH) 1000 Inductance (µH) 3300 µH 0.1 1 Current (A) 10 330 µH 100 µH 100 33 µH 10 µH 10 1 0.01 1 0.1 10 Frequency (MHz) Current Derating 120 0.236 ±0.003 * 6,00 ±0,076 100 90 80 70 0.236 ±0.003* 6,00 ±0,076 60 50 40 0.098 ±0.004 2,50 ± 0,10 25°C Percent of rated current 110 30 20 Isat Irms 10 0 -55 -40 -20 Recommended Land Pattern 0.079 2,00 0 20 40 60 80 100 120 0.165 4,20 140 160 Ambient temperature (°C) 0.039 typ 1,00 0.260 0.167 6,60 4,25 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. ® © Coilcraft, Inc. 2011 inches mm Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 0.071 1,80 0.079 2,00 0.167 4,25 0.260 6,60 0.039 typ 1,00 Dimensions are in 0.165 4,20 Document ML554-2 Phone 800-981-0363 Fax 847-639-1508 Revised 03/28/11 E-mail [email protected] Web www.coilcraft-cps.com