5082-761x Series
7.6 mm (0.3 inch)/10.9 mm (0.43 inch)
Seven Segment Displays
Data Sheet
5082-761x Series/-762x Series/-765x Series/-766x Series
HDSP-360x Series/-460x Series/-E15x Series
Description
Features, continued
The 7.6 mm (0.3 inch) and 10.9 mm (0.43 inch) LED seven
segment displays are designed for viewing distances up
to 3 metres (10 feet) and 5 metres (16 feet). These devices
use an industry standard size package and pinouts. All
devices are available as either common anode or common
cathode.
x Design flexibility
– Common anode or common cathode
– Single digits
– Left or right hand decimal point ±1. overflow
character
Features
x Industry standard size
x Industry standard pinout
– 7.62 mm (0.300 inch) DIP leads on 2.54 mm (0.100
inch) centers
x Categorized for luminous intensity
– Yellow and Green categorized for color
– Use of like categories yields a uniform display
x High light output
x High peak current
x Excellent for long digit string multiplexing
x Choice of colors
– AlGaAs Red, High Efficiency Red, Yellow, Green
x Intensity and color selection available
– See Intensity and Color Selected Displays Data Sheet
x Excellent appearance
– Evenly lighted segments
– ±50° viewing angle
– Optimum contrast given by gray top surface for
AlGaAs Red and Green devices
– Red top surface for HER devices
– Yellow top surface for yellow devices
x Sunlight viewable AlGaAs
Devices
AlGaAs[1]
Red HDSP-
HER[1]
5082-
Yellow
5082-
Green
HDSP-
Description
Package
Drawing
7620
7621
7623
E150
E151
E153
E156
7610
7611
7613
7650
7651
7653
7656
3600
3601
3603
4600
4601
4603
4606
7.6 mm Common Anode Left Hand Decimal
7.6 mm Common Anode Right Hand Decimal
7.6 mm Common Cathode Right Hand Decimal
10.9 mm Common Anode Left Hand Decimal
10.9 mm Common Anode Right Hand Decimal
10.9 mm Common Cathode Right Hand Decimal
10.9 mm Universal ± 1. Overflow Right Hand Decimal[2]
A
B
C
E
F
G
H
7661
7663
7666
Notes:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data sheet for low
current operation.
2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.
Part Number
5082 – X XX X – X X X X
HDSP – X XX X – X X X X
Mechanical Option [1]
00: No Mechanical Option
Color Bin Options [1, 2]
0: No Color Bin Limitation
4: Color Bin 4 Only (applicable for Green devices only)
B: Color Bins 2 and 3 (applicable for Yellow devices only)
Maximum Intensity Bin [1, 2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin [1, 2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color [1]
0: Common Anode
1: Common Anode
3: Common Cathode
Device Specific Configuration [1]
Refer to Respective Datasheet
Package [1]
E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply).
Please refer to respective datasheet for specific bin limit information.
2
These displays are ideal for most displays are ideal for
portable applications. Pin for pin equiva-applications.
The high light lent displays are also available in ambient
displays are ideal for a low current or high light high light
Package Dimensions
3
ambients or long string ambient design. The low current
lengths. For additional information see the Low Current
Seven Segment Displays, or High Light Ambient Seven
Segment Displays data sheets.
Internal Circuit Diagram
Absolute Maximum Ratings
Description
AlGaAs Red
HDSP-E150
Series
HER
5082-7610/
7650 Series
Yellow
5082-7620/
7660 Series
Green
HDSP-3600/
4600 Series
Units
Average Power per Segment or DP
96
105
80
105
mW
Peak Forward Current per Segment or DP
160[1]
90[3]
60[5]
90[7]
mA
DC Forward Current per Segment or DP
40[2]
30[4]
20[6]
30[8]
Operating Temperature Range
-20 to +100[9]
Storage Temperature Range
-40 to +100
mA
°C
-55 to +100°C
°C
Reverse Voltage per Segment or DP
3.0 V
V
Wave Soldering Temperature for 3 Seconds
(1.59 mm [0.063 in.] below Body)
250
°C
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 6 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 7 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 8 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below -20°C, contact your local Avago components sales office or an authorized distributor.
4
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device Series
Parameter
Symbol
Min.
Typ.
Units
Test Conditions
Luminous Intensity/Segment[1,2,5]
(Digit Average)
IV
8.5
15.0
mcd
IF = 20 mA
Forward Voltage/Segment or DP
VF
1.8
V
IF = 20 mA
V
IF = 100 mA
Peak Wavelength
OPEAK
645
nm
Dominant Wavelength[3]
Od
637
nm
Reverse Voltage/Segment or DP[4]
VR
15
V
Temperature Coefficient of VF/
Segment or DP
'VF/°C
-2
mV/°C
Thermal Resistance LED Junction-to-Pin
RTJ-PIN
340
°C/W/Seg
2.0
HDSP-E15x
3.0
Max.
3.0
IR = 100 PA
High Efficiency Red
Device Series
Parameter
Symbol
Min.
Typ.
Units
Test Conditions
5082-761x
Luminous Intensity/Segment[1,2,6]
(Digit Average)
IV
340
800
Pcd
IF = 5 mA
340
1115
Pcd
IF = 5 mA
Forward Voltage/Segment or DP
VF
V
IF = 20 mA
5082-765x
2.1
Max.
2.5
Peak Wavelength
OPEAK
635
nm
Dominant Wavelength[3]
Od
626
nm
Reverse Voltage/Segment or DP[4]
VR
30
V
Temperature Coefficient of VF/
Segment or DP
'VF/°C
-2
mV/°C
Thermal Resistance LED Junction-to-Pin
RTJ-PIN
280
°C/W
Device Series
Parameter
Symbol
5082-762x
Luminous Intensity/Segment[1,2]
IV
5082-766x
(Digit Average)
All
3.0
IR = 100 PA
Yellow
Forward Voltage/Segment or DP
All
5
Min.
Typ.
Max.
Units
Test Conditions
205
620
Pcd
IF = 5 mA
290
835
Pcd
IF = 5 mA
2.5
V
IF = 20 mA
592.5
nm
2.2
VF
Peak Wavelength
OPEAK
Dominant Wavelength[3,7]
Od
581.5
586
Reverse Voltage/Segment or DP[4]
VR
3.0
40
V
Temperature Coefficient of VF/
Segment or DP
'VF/°C
-2
mV/°C
Thermal Resistance LED Junction-to-Pin
RTJ-PIN
280
°C/W/Seg
583
nm
IR = 100 PA
High Performance Green
Device Series
Parameter
Symbol
HDSP-360x
Luminous Intensity/Segment[1,2]
IV
HDSP-460x
(Digit Average)
Forward Voltage/Segment or DP
All
Min.
Typ.
Max.
Units
Test Conditions
860
2700
Pcd
IF = 10 mA
1030
4000
Pcd
IF = 10 mA
2.5
V
IF = 10 mA
577
nm
VF
2.1
Peak Wavelength
OPEAK
566
Dominant Wavelength[3,7]
Od
571
Reverse Voltage/Segment or DP[4]
VR
Temperature Coefficient of VF/
Segment or DP
Thermal Resistance LED Junction-to-Pin
3.0
nm
50
V
'VF/°C
-2
mV/°C
RTJ-PIN
280
°C/W/Seg
IR = 100 PA
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, Od, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin
compatible with the HDSP-E15X series.
6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible
with the 5082-7650 series.
7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is designated by a
number adjacent to the luminous intensity category letter.
6
,'&0$;±0$;,080'&&855(173(56(*0(17±P$
AlGaAs Red
$O*D$V5('
3($.±1250$/,=('5(/$7,9(()),&,(1&<
5T-$ &:
$O*D$V5('
7$±$0%,(177(03(5$785(±&
Figure 2. Maximum Allowable DC Current vs. Ambient Temperature.
Figure 3. Forward Current vs. Forward Voltage.
K
9)±)25:$5'92/7$*(±9
$O*D$V5('
,3($.±3($.)25:$5'&855(17
3(56(*0(17±P$
Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs.
Peak Current.
7
5(/$7,9(/80,1286,17(16,7<
1250$/,=('72$7P$
,)±)25:$5'&855(173(56(*0(17±P$
Figure 1. Maximum Allowed Peak Current vs. Pulse Duration – AlGaAs Red.
$O*D$V5('
,)±)25:$5'&855(173(56(*0(17±P$
Figure 4. Relative Luminous Intensity vs. DC Forward Current.
HER, Yellow, Green
Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration – HER Series.
Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow Series.
Figure 8. Allowable Peak Current vs. Pulse Duration – Green Series.
Figure 9. Maximum Allowable DC Current vs. Ambient Temperature.
Figure 10. Forward Current vs. Forward Voltage.
8
Figure 11. Relative Luminous Intensity vs.
DC Forward Current.
Figure 12. Relative Luminous Efficiency
(Luminous Intensity per Unit Current) vs.
Peak Current.
Intensity Bin Limits (mcd)
AlGaAs Red
Yellow
HDSP-E15x
5082-762x
IV Bin Category
Min.
Max.
IV Bin Category
Min.
Max.
L
8.67
15.90
B
0.229
0.387
M
13.00
23.80
C
0.317
0.582
N
19.50
35.80
D
0.476
0.872
O
29.30
53.60
E
0.714
1.311
P
43.90
80.50
F
1.073
1.967
G
1.609
2.950
H
2.413
4.425
HER
5082-766x
5082-761x
IV Bin Category
Min.
Max.
IV Bin Category
Min.
Max.
0.297
0.543
B
0.369
0.630
C
C
0.516
0.946
D
0.445
0.817
D
0.774
1.418
E
0.669
1.225
E
1.160
2.127
F
1.003
1.838
F
1.740
3.190
G
1.504
2.758
G
2.610
4.785
H
2.256
4.137
H
3.915
7.177
IV Bin Category
Min.
Max.
B
0.347
0.593
HDSP-360x
C
0.485
0.890
IV Bin Category
Min.
Max.
D
0.728
1.333
H
0.86
1.58
E
1.091
2.000
I
1.29
2.37
F
1.636
3.000
J
1.94
3.55
G
2.454
4.500
K
2.90
5.33
H
3.682
6.751
L
4.37
8.01
IV Bin Category
Min.
Max.
G
1.03
1.88
H
1.54
2.82
I
2.31
4.23
J
3.46
6.34
K
5.18
9.50
L
7.78
14.26
5082-765x
Green
HDSP-460x
9
Color Categories
Dominant Wavelength (nm)
Color
Bin
Min.
Max.
Yellow
1
581.50
585.00
3
584.00
587.50
2
586.50
590.00
4
589.00
592.50
2
573.00
577.00
3
570.00
574.00
4
567.00
571.00
5
564.00
568.00
Green
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago
representatives for further clarification/information.
Contrast Enhancement
For information on contrast enhancement, please see
Application Note 1015.
Soldering/Cleaning
For information on soldering LEDs, please refer to Application Note 1027.
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5988-3325EN
AV02-2550EN - January 27, 2011