65W Constant Current Mode LED Driver F 110 M M HVGC-65 series IP65 IP67 ■ Features Wide input range 180 ~ 528VAC Constant Current mode output Metal housing with ClassⅠdesign Built-in active PFC function IP67 / IP65 design for indoor or outdoor installations Function options: output adjustable via potentiometer; ■ Applications LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp 3 in 1 dimming (dim-to-off) ; Timer dimming Typical lifetime>50000 hours 5 years warranty ■ Description HVGC-65 series is a 65W LED AC/DC LED power supply featuring the constant current mode and high voltage output. HVGC-65 operates from 180~528VAC and offers models with different rated current ranging between 350mA and 1050mA. Thanks to the high efficiency up to 90.5%, with the fanless design, the entire series is able to operate for -40℃ ~ +80℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVGC-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. ■ Model Encoding HVGC - 65 - 1050 A Function options Rated output current(350/500/700/1050mA) Rated wattage Series name Type A B D IP Level IP65 IP67 IP67 Function Io adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Timer dimming function, contact MEAN WELL for details(safety pending). Note In Stock In Stock By request File Name:HVGC-65-SPEC 2016-10-25 HVGC-65 65W Constant Current Mode LED Driver series SPECIFICATION MODEL OUTPUT HVGC-65-350 HVGC-65-500 HVGC-65-700 HVGC-65-1050 RATED CURRENT 350mA 500mA 700mA 1050mA RATED POWER 65.1W 65W 65.1W 65.1W 13 ~ 130V 9 ~ 93V 6 ~ 62V 420 ~ 700mA 630 ~ 1050mA CONSTANT CURRENT REGION Note.2 18 ~ 186V Adjustable for A-Type only (via the built-in potentiometer) CURRENT ADJ. RANGE 210 ~ 350mA INPUT CURRENT RIPPLE SET UP TIME Note.4 500ms / 230Vac 400ms / 347VAC,480VAC Note.5 5.0% max. @rated current VOLTAGE RANGE Note.3 47 ~ 63Hz POWER FACTOR (Typ.) PF≧0.98/230VAC, PF≧0.97/277VAC, PF≧0.95/347VAC, PF≧0.93/480VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20%(@ load≧60%/230VAC, 277VAC, 347VAC; @ load≧75%/480VAC) (Please refer to “TOTAL HARMONIC DISTORTION (THD)” section) EFFICIENCY (Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER <0.75mA / 480VAC Constant current limiting, recovers automatically after fault condition is removed 195 ~ 210V 137 ~ 150V 98 ~ 107V Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. MAX. CASE TEMP. Tcase=-40 ~ +80℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) 65 ~ 72V Tcase=+80℃ 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 60℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384, independent, IP65 or IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Note.6 Compliance to EN55015, EN61000-3-2 Class C (@ load≧60%) ; EN61000-3-3, FCC Part 15 Subpart B ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) 611K hrs min. Telcordia SR-332 (Bellcore) ; 202.7K hrs min. MIL-HDBK-217F (25℃) DIMENSION 189*61.5*36.8mm (L*W*H) 0.77Kg; 18pcs/14.9Kg/0.89CUFT PACKING NOTE 90% 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 480VAC LEAKAGE CURRENT WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT OTHERS 90% 90.5% 90.5% 0.22A / 347VAC 0.18A / 480VAC COLD START 25A(twidth=420μs measured at 50% Ipeak) at 480VAC; Per NEMA 410 SHORT CIRCUIT PROTECTION OVER VOLTAGE EMC 180 ~ 528VAC 254VDC ~ 747VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE AC CURRENT (Typ.) INRUSH CURRENT (Typ.) SAFETY & 300 ~ 500mA ±5.0% CURRENT TOLERANCE 1. All parameters NOT specially mentioned are measured at 347VAC input, rated current and 25℃ of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. Please refer to STATIC CHARACTERISTIC sections for details. 4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 5. It is measured 50%~100% of maximum voltage under rated power delivery. 6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains. 8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less. 9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com File Name:HVGC-65-SPEC 2016-10-25 HVGC-65 65W Constant Current Mode LED Driver series Block Diagram PFC fosc : 65KHz PWM fosc : 75KHz I/P EMI FILTER & RECTIFIERS POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. PFC CONTROL PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. O.T.P. DRIVING METHODS OF LED MODULE ※ This series works in constant current mode to directly drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Vo(%) Should there be any compatibility issues, please contact MEAN WELL. Constant Current region 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HVGC-65-SPEC 2016-10-25 HVGC-65 65W Constant Current Mode LED Driver series DIMMING OPERATION FG (Green/Yellow) AC/L(Brown) AC/N(Blue) -V(Black) +V(Red) HVGC-65 DIM+(Blue) DIM-(White) ※ 3 in 1 dimming function (for B-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 1 0 0μA (typ.) ◎ Applying additive 0 ~ 10VDC 100% 90% -V + + - - DIM+ + Output current (%) 80% +V 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage ◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% -V + + - - DIM+ Output current (%) 80% +V 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% “DO NOT connect "DIM- to -V" 0% ◎ Applying additive resistance: 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input 90% -V + 80% + - - DIM+ Additive Resistance Output current (%) +V 70% 60% 50% 40% 30% DIM“DO NOT connect "DIM- to -V" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 6% and the output current is not defined when 0%< I out<6%. 2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:HVGC-65-SPEC 2016-10-25 HVGC-65 65W Constant Current Mode LED Driver series 100 100 80 80 60 60 LOAD (%) LOAD (%) OUTPUT LOAD vs TEMPERATURE 40 20 -40 -25 -10 0 15 30 50 60 70 40 20 (HORIZONTAL) -40 -25 0 20 45 AMBIENT TEMPERATURE,Ta (℃) 55 65 75 80 (HORIZONTAL) Tcase (℃) STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC ※ Tcase at 70℃ 1 .0 0 0 .9 8 0 .9 6 0 .9 4 0 .9 2 0 .9 0 0 .8 8 0 .8 6 0 .8 4 0 .8 2 0 .8 0 0 .7 8 100 90 PF 80 LOAD (%) 70 60 50 40 480V 347V 277V 230V 60% 180 347 440 480 70% 80% 90% 100% (65W) 528 LOAD INPUT VOLTAGE (V) 60Hz ※ De-rating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD HVGC-65 series possess superior working efficiency that up to 90.5% can be reached in field applications. ※ 700mA Model, Tcase at 70℃ ※ 700mA Model, Tcase at 70℃ 18 100 16 95 14 90 12 480VAC 10 347VAC 8 277VAC 6 230VAC 4 EFFICIENCY(%) THD(%) 20 85 480V 80 347V 75 277V 230V 70 65 2 60 0 50% 60% 70% 80% LOAD 90% 100% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:HVGC-65-SPEC 2016-10-25 HVGC-65 65W Constant Current Mode LED Driver series LIFE TIME 120 100 LIFETIME(Kh) 80 60 40 20 0 20 30 40 50 60 70 80 Tcase ( ℃ ) File Name:HVGC-65-SPEC 2016-10-25 HVGC-65 65W Constant Current Mode LED Driver MECHANICAL SPECIFICATION Case No. 957 series Unit:mm ※ A-Type 189 165 12 7 9.6 32 300±20 61.5 300±20 tc 30.75 STW 18AWG×3C 7 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 82.5 Io ADJ. SJTW 18AWG×2C -V(Black) +V(Red) ψ4.2×4PL : Max. Case Temperature 36.8 tc ※ B-Type 189 165 12 9.6 7 300±20 32 61.5 82.5 UL2517 18AWG×2C -V(Black) +V(Red) DIM+(Blue) DIM-(White) ψ4.2×4PL : Max. Case Temperature 36.8 tc tc 30.75 STW 18AWG×3C 7 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJTW 18AWG×2C 300±20 ※ D-Type 189 165 12 7 9.6 300±20 tc 30.75 32 STW 18AWG×3C 68 300±20 7 82.5 SJTW 18AWG×2C -V(Black) +V(Red) ψ4.2×4PL tc : Max. Case Temperature 38.8 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) File Name:HVGC-65-SPEC 2016-10-25 HVGC-65 65W Constant Current Mode LED Driver series WATERPROOF CONNECTION ※ Waterproof connector Waterproof connector can be assembled on the output cable of HVGC-65 to operate in dry/wet/damp or outdoor environment. AC source HVGC-65 I/P Size O/P Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. 5-PIN 5A/PIN M12-05 10A max. Size Pin Configuration (Female) M15 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp ※ Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 ψ25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HVGC-65 O/P Wires ◎ CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:HVGC-65-SPEC 2016-10-25