Surface Mount JPS-3-1+ JPS-3-1 Power Splitter/Combiner 3 Way-0° 50Ω 5 to 300 MHz Maximum Ratings Operating Temperature Storage Temperature Features -40°C to 85°C -55°C to 100°C Power Input (as a splitter) Internal Dissipation 1W max. 0.375W max. Permanent damage may occur if any of these limits are exceeded. Pin Connections SUM PORT 1 PORT 1 6 PORT 2 4 PORT 3 3 GROUND 2,5 • wideband, 5 to 300 MHz • high isolation, 33 dB typ. • low insertion loss, 0.3 dB typ. Electrical Specifications FREQ. RANGE (MHz) 5-300 K .065 1.65 L .300 7.62 F .055 1.40 G .100 2.54 wt grams 0.45 Demo Board MCL P/N: TB-211 Suggested PCB Layout (PL-097) AMPLITUDE UNBALANCE (dB) L M U L M U L M U L M U Typ. Min. Typ. Min. Typ. Max. Typ. Max. Typ. Max. Max. Max. Max. Max. Max. Max. 0.3 0.3 0.5 2.0 4.0 6.0 0.4 0.4 0.6 34 25 33 23 32 20 0.6 M = mid range [10 fL to fU/2] 0.7 1.4 U= upper range [fU/2 to fU] Amp. Unbal. (dB) Total Loss (dB) 1 Isolation (dB) Phase VSWR VSWR VSWR VSWR Unbal. S 1 2 3 (deg.) S-1 S-2 S-3 1-2 1-3 2-3 5.00 8.00 10.00 20.00 35.00 4.96 4.93 4.94 4.95 4.98 5.08 5.07 5.04 5.04 5.06 5.03 5.00 5.00 4.99 5.02 0.12 0.14 0.11 0.09 0.08 36.91 37.89 38.11 37.92 37.22 33.62 34.24 34.35 34.31 33.58 35.80 35.50 35.29 34.69 33.72 0.62 0.52 0.36 0.22 0.13 1.09 1.07 1.06 1.04 1.04 1.11 1.08 1.07 1.06 1.05 1.13 1.10 1.10 1.08 1.07 1.16 1.14 1.13 1.12 1.11 50.00 65.00 80.00 95.00 110.00 4.99 5.01 5.03 5.05 5.08 5.08 5.10 5.11 5.13 5.15 5.05 5.04 5.06 5.08 5.10 0.09 0.08 0.08 0.08 0.07 36.36 35.45 34.62 34.24 34.06 33.15 32.52 31.74 31.40 31.26 32.78 31.94 31.15 30.56 30.29 0.13 0.25 0.26 0.14 0.23 1.03 1.03 1.04 1.04 1.04 1.04 1.04 1.04 1.04 1.04 1.06 1.05 1.05 1.05 1.05 1.11 1.11 1.10 1.09 1.09 130.00 170.00 210.00 250.00 300.00 5.11 5.18 5.24 5.34 5.50 5.17 5.22 5.27 5.32 5.45 5.12 5.16 5.22 5.27 5.37 0.06 0.05 0.05 0.07 0.12 34.13 33.68 35.00 40.60 41.62 31.25 30.69 30.99 33.64 40.75 29.99 28.91 28.88 29.78 30.25 0.37 0.41 0.54 0.57 0.91 1.05 1.03 1.07 1.12 1.11 1.04 1.03 1.01 1.02 1.02 1.05 1.07 1.07 1.08 1.12 1.08 1.07 1.07 1.08 1.11 1. Total Loss = Insertion Loss + 4.8dB splitter loss. JPS-3-1 TOTAL LOSS 6.0 S-1(dB) JPS-3-1 ISOLATION 50 S-2(dB) S-3(dB) 1-2 (dB) 45 5.6 ISOLATION (dB) J .065 1.65 E .225 5.72 PHASE UNBALANCE (Degrees) Typ. Min. Freq. (MHz) TOTAL LOSS (dB) H .047 1.19 D .100 2.54 INSERTION LOSS (dB) ABOVE 4.8 dB Typical Performance Data Outline Dimensions ( inch mm ) C --- ISOLATION (dB) L = low range [fL to fU/2] Suggested Layout, Tolerance to be within ±.002 B .310 7.87 The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications • VHF • defense & federal communications • amateur & FM radio PCB Land Pattern A .280 7.11 +RoHS Compliant Applications fL-fU Outline Drawing CASE STYLE: BH292 5.2 4.8 1-3 (dB) 2-3 (dB) 40 35 30 25 4.4 20 0 60 120 180 240 300 FREQUENCY (MHz) 0 60 120 180 240 300 FREQUENCY (MHz) JPS-3-1 VSWR 1.25 #S-VSWR 1.20 #1-VSWR electrical schematic VSWR 1.15 1.10 1.05 1.00 0 60 120 180 240 300 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. D M151107 JPS-3-1 DY/TD/CP/AM 150909 Page 1 of 1