Document 843-1 RE U T A R E P M E HIGH T SMT Power Inductors – MSS1038T • Designed for high temperature applications; ambient temperature up to 165°C. • AEC-Q200 qualified • Very low DCR and excellent current handling Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant matte tin over nickel over copper. Other terminations available at additional cost. Weight: 1.5 g Ambient temperature –40°C to +125°C with (40°C rise) Irms current. Maximum part temperature +165°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 250/7″ reel; 1000/13″ reel; Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 4.3 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Isat (A)4 Irms (A)5 DCR SRF Inductance2 max typ3 10% 20% 30% 20°C 40°C Part number1 (µH) (m) (MHz) drop drop drop rise rise MSS1038T-821NL_ 0.82 ±30% 6.0 138 9.00 11.16 12.10 7.30 10.0 MSS1038T-152NL_ 1.5 ±30% 8.1 81 7.40 9.48 11.06 5.60 7.85 MSS1038T-252NL_ 2.5 ±30% 10 61 5.70 7.62 9.26 4.65 6.65 MSS1038T-382NL_ 3.8 ±30% 13 45 4.94 6.50 7.64 4.25 6.05 MSS1038T-522NL_ 5.2 ±30% 22 37 3.96 5.28 6.14 3.60 5.10 MSS1038T-702NL_ 7.0 ±30% 27 33 3.62 4.74 5.60 3.10 4.35 MSS1038T-103NL_ 10 ±30% 35 29 3.04 3.90 4.52 2.90 4.05 MSS1038T-123ML_ 12 ±20% 41 25 2.72 3.48 4.04 2.85 4.00 MSS1038T-153ML_ 15 ±20% 50 21 2.84 3.44 3.86 2.70 3.80 MSS1038T-183ML_ 18 ±20% 65 18 2.44 3.10 3.52 2.25 3.35 MSS1038T-223ML_ 22 ±20% 73 15 2.34 2.94 3.30 1.90 2.85 MSS1038T-273ML_ 27 ±20% 89 15 1.98 2.48 2.84 1.65 2.35 MSS1038T-333ML_ 33 ±20% 93 13 1.84 2.34 2.62 1.60 2.30 MSS1038T-393ML_ 39 ±20% 112 12 1.60 2.04 2.34 1.55 2.25 MSS1038T-473ML_ 47 ±20% 128 11 1.60 1.98 2.22 1.45 2.20 MSS1038T-563ML_ 56 ±20% 180 11 1.48 1.84 2.04 1.40 1.85 MSS1038T-683ML_ 68 ±20% 213 10 1.32 1.62 1.82 1.15 1.75 MSS1038T-823ML_ 82 ±20% 261 8 1.12 1.42 1.60 1.09 1.50 MSS1038T-104ML_ 100 ±20% 304 6 1.02 1.30 1.46 1.05 1.45 MSS1038T-124KL_ 120 ±10% 380 6 0.95 1.18 1.34 0.85 1.25 MSS1038T-154KL_ 150 ±10% 506 6 0.89 1.10 1.22 0.80 1.20 MSS1038T-184KL_ 180 ±10% 582 5 0.89 1.02 1.16 0.71 0.98 MSS1038T-224KL_ 220 ±10% 756 5 0.72 0.88 0.99 0.70 0.97 MSS1038T-274KL_ 270 ±10% 926 4 0.66 0.81 0.91 0.65 0.86 MSS1038T-334KL_ 330 ±10% 1090 4 0.59 0.73 0.82 0.50 0.69 MSS1038T-394KL_ 390 ±10% 1141 4 0.51 0.65 0.74 0.49 0.65 MSS1038T-474KL_ 470 ±10% 1243 3 0.50 0.62 0.70 0.45 0.63 MSS1038T-564KL_ 560 ±10% 1696 3 0.43 0.53 0.56 0.43 0.59 MSS1038T-684KL_ 680 ±10% 1926 3 0.38 0.48 0.52 0.36 0.50 MSS1038T-824KL_ 820 ±10% 2596 3 0.37 0.46 0.49 0.34 0.47 MSS1038T-105KL_ 1000 ±10% 2853 3 0.35 0.43 0.46 0.33 0.45 1. Please specify termination and packaging codes: MSS1038T-105KLC Termination: L = RoHS compliant matte tin over nickel over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel). 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. SRF measured using an Agilent/HP 8753D or equivalent. 4. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 5. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 843-1 Revised 03/31/16 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 843-2 RE U T A R E P M E HIGH T SMT Power Inductors – MSS1038T Typical L vs Current Typical L vs Frequency 10000 10000 1000 µH 270 µH 100 µH 100 27 µH 10 µH 10 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 270 µH 100 µH 100 27 µH 10 µH 10 1.5 µH 1 0.01 1.5 µH 1 0.1 10 1 0.01 Current (A) 0.402 ±0.012* 10,2 ±0,3 Dash number 123 X Internal code 1 10 Document 843-2 Revised 03/31/16 0.1 Frequency (MHz) Parts manufactured prior to Sept. 2007 were marked with only the dash number. 0.394 ±0.008 * 10,0 ±0,2 0.150 ±0.008 3,8 ±0,2 Recommended Land Pattern 0.047 ±0.008 1,2 ±0,2 0.14 3,56 0.118 ±0.008 3,0 ±0,2 0.37 9,40 0.303 ±0.008 7,7 ±0,2 0.07 1,78 * Dimensions are of the case not including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. Dimensions are in inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.