HT75XX-2 100mA Low Power LDO Features · Low power consumption · High output current : 100mA · Low voltage drop · Output voltage accuracy: tolerance ±1% · Low temperature coefficient · TO92, SOT89 and SOT23-5 packages · High input voltage (up to 24V) Applications · Battery-powered equipment · Audio/Video equipment · Communication equipment General Description The HT75XX-2 series is a set of three-terminal low power high voltage implemented in CMOS technology. They can deliver 100mA output current and allow an input voltage as high as 24V. They are available with several fixed output voltages ranging from 2.1V to 12.0V. CMOS technology ensures low voltage drop and low quiescent current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain variable voltages and currents. Selection Table Part No. Note: Output Voltage HT7521-2 2.1V HT7523-2 2.3V HT7525-2 2.5V HT7527-2 2.7V HT7530-2 3.0V HT7533-2 3.3V HT7536-2 3.6V HT7540-2 4.0V HT7544-2 4.4V HT7550-2 5.0V HT7560-2 6.0V HT7570-2 7.0V HT7580-2 8.0V HT7590-2 9.0V HT75A0-2 10.0V HT75C0-2 12.0V HT7541-2 4.15V Package Marking TO92 SOT89 SOT23-5 75XX-2# (for TO92) 75XX-2# (for SOT89) 5XX2+ (for SOT23-5-A) SOT23-5 541B+ (for SOT23-5-B) ²XX² stands for output voltages. ²#² stands for Lead-free devices. ²+² stands for green compound devices, which are Lead-free and Halogen-free. Rev. 1.20 1 June 1, 2011 HT75XX-2 Block Diagram V IN V O U T V re f G N D Pin Assignment T O 9 2 S O T 8 9 S O T 2 3 -5 -A S O T 2 3 -5 -B N C F r o n t V ie w N C V O U T N C T o p V ie w G N D V IN V O U T B o tto m G N D V IN G N D V IN V O U T G N D V IN V O U T V IN G N D N C G N D V IN V O U T V IN G N D N C V ie w V O U T Absolute Maximum Ratings Supply Voltage .........................................-0.3V to 26V Storage Temperature ...........................-50°C to 125°C Operating Temperature ..........................-40°C to 85°C Note: These are stress ratings only. Stresses exceeding the range specified under ²Absolute Maximum Ratings² may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. Thermal Information Symbol qJA PD Parameter Thermal Resistance (Junction to Ambient) (Assume no ambient airflow, no heat sink) Power Dissipation Package Max. Unit SOT23-5 500 °C/W SOT89 200 °C/W TO92 200 °C/W SOT23-5 0.20 W SOT89 0.50 W TO92 0.50 W Note: PD is measured at Ta= 25°C Rev. 1.20 2 June 1, 2011 HT75XX-2 Pin Descriptions Pin No. Pin Name Pin Description 1 GND Ground pin 2 VIN Input pin 3 VOUT Output pin Electrical Characteristics VIN =VOUT+2V, CIN=CO=10mF Symbol Input Voltage VOUT Output Voltage Tolerance Output Current DVOUT Test Conditions Parameter VIN IOUT Ta=25°C Load Regulation Conditions ¾ IOUT=10mA Voltage Drop (Note) Typ. Max. Unit ¾ ¾ 24 V +1% V -1% 2.1V£VOUT£4.4V 70 100 ¾ mA VOUT=5.0V 100 150 ¾ mA 6.0V£VOUT£12.0V 150 ¾ ¾ mA 2.1V£VOUT£3.6V 1mA£IOUT£50mA ¾ 10 45 mV 4.0V£VOUT£4.4V 1mA£IOUT£50mA ¾ 13 65 mV 5.0V£VOUT£12.0V 1mA£IOUT£70mA ¾ 17 80 mV ¾ 0.46 0.95 V 2.5V£VOUT£2.7V 0.32 0.68 V 3.0V£VOUT£3.3V 0.23 0.41 V VOUT=3.6V 0.19 0.35 V 4.0V£VOUT£4.4V 0.16 0.30 V VOUT=5.0V 0.12 0.25 V 6.0V£VOUT£12.0V 0.11 0.23 V 2.1V£VOUT£2.4V VDIF Min. IOUT=10mA, DVOUT=2% ISS Quiescent Current No load ¾ 2.5 5.0 mA DVLINE Line Regulation VIN=VOUT+1V£VIN£24V, IOUT=1mA ¾ 0.1 0.2 %/V Temperature Coefficient IOUT=10mA 2.1V£VOUT£12.0V -40°C<Ta<85°C ¾ 100 ¾ ppm/°C D V O D T Note: U T a Dropout voltage is defined as the input voltage minus the output voltage that produces a 2% change in the output voltage from the value at VIN = VOUT + 2V with a fixed load. Rev. 1.20 3 June 1, 2011 HT75XX-2 Application Circuits Basic Circuit V IN V H T 7 5 X X -2 S e r ie s IN C 1 1 0 m F V V O U T O U T C 2 1 0 m F G N D C o m m o n C o m m o n S in g le p o in t G N D High Output Current Positive Voltage Regulator T r1 V V IN H T 7 5 X X -2 S e r ie s IN R 1 V V O U T G N D C 1 1 0 m F C o m m o n O U T C 2 1 0 m F C o m m o n S in g le p o in t G N D Short-Circuit Protection for Tr1 V R s IN T r1 V R 1 C 1 1 0 m F IN H T 7 5 X X -2 S e r ie s O U T C 2 1 0 m F S in g le p o in t G N D 4 V O U T G N D C o m m o n Rev. 1.20 V C o m m o n June 1, 2011 HT75XX-2 Circuit for Increasing Output Voltage V V IN IN V H T 7 5 X X -2 S e r ie s C 1 1 0 m F G N D IS V O U T C 2 1 0 m F S V O U T R 1 X X R 2 C o m m o n S in g le p o in t G N D C o m m o n R2 ) + ISS R2 R1 VOUT = VXX ( 1 + Circuit for Increasing Output Voltage V V IN IN V H T 7 5 X X -2 S e r ie s C 1 1 0 m F G N D IS V O U T C 2 V 1 0 m F S X X O U T R 1 D 1 C o m m o n S in g le p o in t G N D C o m m o n VOUT = VXX + VD1 Constant Current Regulator V V IN IN V H T 7 5 X X -2 S e r ie s C 1 1 0 m F G N D IS O U T C 2 1 0 m F V S X X R A IO U T R L C o m m o n IOUT = VXX + ISS RA Dual Supply IC 1 V V IN IN H T 7 5 X X -2 S e r ie s IC 2 V C 1 1 0 m F IN H T 7 5 X X -2 S e r ie s G N D V O U T O U T V C 2 1 0 m F C o m m o n Rev. 1.20 O U T C 3 1 0 m F G N D V V O U T R 1 C o m m o n 5 June 1, 2011 HT75XX-2 Package Information 3-pin TO92 Outline Dimensions A B D C E F G H Symbol Nom. Max. A 0.170 ¾ 0.200 B 0.170 ¾ 0.200 C 0.500 ¾ ¾ D 0.011 ¾ 0.020 E 0.090 ¾ 0.110 F 0.045 ¾ 0.055 G 0.045 ¾ 0.065 H 0.130 ¾ 0.160 a 0° ¾ 10° Symbol A Rev. 1.20 Dimensions in inch Min. Dimensions in mm Min. Nom. Max. 4.32 ¾ 5.08 B 4.32 ¾ 5.08 C 12.70 ¾ ¾ D 0.28 ¾ 0.51 E 2.29 ¾ 2.79 F 1.14 ¾ 1.40 G 1.14 ¾ 1.65 H 3.30 ¾ 4.06 a 0° ¾ 10° 6 June 1, 2011 HT75XX-2 3-pin SOT89 Outline Dimensions I A J B C E D G F Symbol Dimensions in inch Min. Nom. Max. A 0.173 ¾ 0.181 B 0.059 ¾ 0.072 C 0.090 ¾ 0.102 D 0.035 ¾ 0.047 E 0.155 ¾ 0.167 F 0.014 ¾ 0.019 G 0.017 ¾ 0.022 H ¾ 0.059 ¾ I 55 ¾ 63 J 14 ¾ 17 Symbol A Rev. 1.20 H Dimensions in mm Min. Nom. Max. 4.39 ¾ 4.60 B 1.50 ¾ 1.83 C 2.29 ¾ 2.59 D 0.89 ¾ 1.19 E 3.94 ¾ 4.24 F 0.36 ¾ 0.48 G 0.43 ¾ 0.56 H ¾ 1.50 ¾ I 1.40 ¾ 1.60 J 0.36 ¾ 0.43 7 June 1, 2011 HT75XX-2 5-pin SOT23-5 Outline Dimensions D C L H E q e A A 2 b Symbol Dimensions in inch Min. Nom. Max. 0.039 ¾ 0.051 A1 ¾ ¾ 0.004 A2 0.028 ¾ 0.035 A b 0.014 ¾ 0.020 C 0.004 ¾ 0.010 D 0.106 ¾ 0.122 E 0.055 ¾ 0.071 e ¾ 0.075 ¾ H 0.102 ¾ 0.118 L 0.015 ¾ ¾ q 0° ¾ 9° Symbol Rev. 1.20 A 1 Dimensions in mm Min. Nom. Max. A 1.00 ¾ 1.30 A1 ¾ ¾ 0.10 A2 0.70 ¾ 0.90 b 0.35 ¾ 0.50 C 0.10 ¾ 0.25 D 2.70 ¾ 3.10 E 1.40 ¾ 1.80 e ¾ 1.90 ¾ H 2.60 ¾ 3.0 L 0.37 ¾ ¾ q 0° ¾ 9° 8 June 1, 2011 HT75XX-2 Product Tape and Reel Specifications TO92 Reel Dimensions (Unit: mm) P a c k a g e U p , F la t S id e U p 3 0 P a c k a g e U p , F la t S id e D o w n 4 3 5 8 8 8 3 6 0 Rev. 1.20 9 June 1, 2011 HT75XX-2 Reel Dimensions D T 2 A C B T 1 SOT89-3 Symbol Description Dimensions in mm A Reel Outer Diameter 180.0±1.0 B Reel Inner Diameter 62.0±1.5 C Spindle Hole Diameter 12.75 +0.15/-0.00 D Key Slit Width T1 Space Between Flange 12.4 +0.2/-0.0 T2 Reel Thickness 17.0 +0.0/-0.4 1.90±0.15 SOT23-5 Symbol Description Dimensions in mm A Reel Outer Diameter 178.0±1.0 B Reel Inner Diameter 62.0±1.0 C Spindle Hole Diameter 13.0±0.2 D Key Slit Width 2.50±0.25 T1 Space Between Flange 8.4 T2 Reel Thickness 11.4 Rev. 1.20 10 +1.5/-0.0 +1.5/-0.0 June 1, 2011 HT75XX-2 Carrier Tape Dimensions P D h W 2 H 1 H H 0 l1 W 0 t W 1 W F 1 F 2 D 0 P 2 P 0 TO92 Symbol Note: Description Dimensions in mm I1 Taped Lead Length (2.5) P Component Pitch 12.7±1.0 P0 Perforation Pitch 12.7±0.3 P2 Component to Perforation (Length Direction) 6.35±0.40 F1 Lead Spread 2.5 +0.4/-0.1 F2 Lead Spread 2.5 +0.4/-0.1 Dh Component Alignment W Carrier Tape Width W0 Hold-down Tape Width 6.0±0.5 W1 Perforation Position 9.0±0.5 W2 Hold-down Tape Position H0 Lead Clinch Height 16.0±0.5 H1 Component Height Less than 24.7 D0 Perforation Diameter 4.0±0.2 t Taped Lead Thickness 0.7±0.2 H Component Base Height 19.0±0.5 0.0±0.1 18.0 +1.0/-0.5 (0.5) Thickness less than 0.38±0.05mm~0.5mm P0 Accumulated pitch tolerance: ±1mm/20pitches. ( ) Bracketed figures are for consultation only Rev. 1.20 11 June 1, 2011 HT75XX-2 Carrier Tape Dimensions P 0 D P 1 t E F W C D 1 B 0 P K 0 A 0 R e e l H o le IC M a r k in g SOT89-3 Symbol Description Dimensions in mm 12.0 +0.3/-0.1 W Carrier Tape Width P Cavity Pitch E Perforation Position 1.75±0.10 F Cavity to Perforation (Width Direction) 5.50±0.05 D Perforation Diameter 1.5 +0.1/-0.0 D1 Cavity Hole Diameter 1.5 +0.1/-0.0 P0 Perforation Pitch 4.0±0.1 P1 Cavity to Perforation (Length Direction) 2.0±0.1 A0 Cavity Length 4.8±0.1 B0 Cavity Width 4.5±0.1 K0 Cavity Depth 1.8±0.1 8.0±0.1 t Carrier Tape Thickness C Cover Tape Width 0.300±0.013 9.3±0.1 SOT23-5 Symbol Description W Carrier Tape Width P Cavity Pitch E Perforation Position Dimensions in mm 8.0±0.3 4.0±0.1 1.75±0.10 F Cavity to Perforation (Width Direction) 3.50±0.05 D Perforation Diameter 1.5 +0.1/-0.0 D1 Cavity Hole Diameter 1.5 +0.1/-0.0 P0 Perforation Pitch P1 Cavity to Perforation (Length Direction) 2.00±0.05 A0 Cavity Length 3.15±0.10 B0 Cavity Width 3.2±0.1 K0 Cavity Depth 1.4±0.1 t Carrier Tape Thickness C Cover Tape Width Rev. 1.20 4.0±0.1 0.20±0.03 5.3±0.1 12 June 1, 2011 HT75XX-2 Holtek Semiconductor Inc. (Headquarters) No.3, Creation Rd. II, Science Park, Hsinchu, Taiwan Tel: 886-3-563-1999 Fax: 886-3-563-1189 http://www.holtek.com.tw Holtek Semiconductor Inc. (Taipei Sales Office) 4F-2, No. 3-2, YuanQu St., Nankang Software Park, Taipei 115, Taiwan Tel: 886-2-2655-7070 Fax: 886-2-2655-7373 Fax: 886-2-2655-7383 (International sales hotline) Holtek Semiconductor Inc. (Shenzhen Sales Office) 5F, Unit A, Productivity Building, No.5 Gaoxin M 2nd Road, Nanshan District, Shenzhen, China 518057 Tel: 86-755-8616-9908, 86-755-8616-9308 Fax: 86-755-8616-9722 Holtek Semiconductor (USA), Inc. (North America Sales Office) 46729 Fremont Blvd., Fremont, CA 94538, USA Tel: 1-510-252-9880 Fax: 1-510-252-9885 http://www.holtek.com Copyright Ó 2011 by HOLTEK SEMICONDUCTOR INC. The information appearing in this Data Sheet is believed to be accurate at the time of publication. However, Holtek assumes no responsibility arising from the use of the specifications described. The applications mentioned herein are used solely for the purpose of illustration and Holtek makes no warranty or representation that such applications will be suitable without further modification, nor recommends the use of its products for application that may present a risk to human life due to malfunction or otherwise. Holtek¢s products are not authorized for use as critical components in life support devices or systems. Holtek reserves the right to alter its products without prior notification. For the most up-to-date information, please visit our web site at http://www.holtek.com.tw. Rev. 1.20 13 June 1, 2011