HP ATF55143 Agilent atf-55143 low noise enhancement mode pseudomorphic hemt in a surface mount plastic package Datasheet

[ Obsolete product ]
Agilent has a new name
Keysight Technologies.
Keysight Technologies Inc. is the world's leading electronic measurement
company, transforming today's measurement experience through innovations in
wireless, modular, and software solutions. With its HP and Agilent legacy,
Keysight delivers solutions in wireless communications, aerospace and defense
and semiconductor markets with world-class platforms, software and
consistent measurement science.
Alldatasheet.com
Agilent ATF-55143 Low Noise
Enhancement Mode
Pseudomorphic HEMT in a
Surface Mount Plastic Package
Data Sheet
Features
• High linearity performance
• Single Supply Enhancement Mode
Technology [1]
• Very low noise figure
The combination of high gain,
high linearity and low noise
makes the ATF-55143 ideal for
cellular/PCS handsets, wireless
data systems (WLL/RLL, WLAN
and MMDS) and other systems in
the 450 MHz to 6 GHz frequency
range.
Surface Mount Package
SOT-343
• 400 micron gate width
• Low cost surface mount small
plastic package SOT-343 (4 lead
SC-70)
• Tape-and-Reel packaging option
available
Specifications
2 GHz; 2.7V, 10 mA (Typ.)
Pin Connections and
Package Marking
DRAIN
SOURCE
5Fx
Description
Agilent Technologies’s ATF-55143
is a high dynamic range, very low
noise, single supply E-PHEMT
housed in a 4-lead SC-70
(SOT-343) surface mount plastic
package.
• Excellent uniformity in product
specifications
• 24.2 dBm output 3rd order intercept
SOURCE
GATE
• 14.4 dBm output power at 1 dB
gain compression
• 0.6 dB noise figure
• 17.7 dB associated gain
Note:
Top View. Package marking provides orientation
and identification
“5F” = Device Code
“x” = Date code character
identifies month of manufacture.
Applications
• Low noise amplifier for cellular/
PCS handsets
• LNA for WLAN, WLL/RLL and
MMDS applications
• General purpose discrete E-PHEMT
for other ultra low noise applications
Note:
1. Enhancement mode technology requires
positive Vgs, thereby eliminating the need for
the negative gate voltage associated with
conventional depletion mode devices.
1
ATF-55143 Absolute Maximum Rating s [1]
Symbol
Parameter
Units
Absolute
Maximum
VDS
Drain-Source Voltage[2]
V
5
VGS
Gate-Source Voltage[2]
V
-5 to 1
VGD
Gate Drain Voltage[2]
V
5
IDS
Drain Current [2]
mA
100
IGS
Gate Current [5]
mA
1
Pdiss
Total Power Dissipation[3]
mW
270
Pin max.
RF Input Power[5]
dBm
7
TCH
Channel Temperature
°C
150
TSTG
Storage Temperature
°C
-65 to 150
θjc
Thermal Resistance [4]
°C/W
235
ESD (Human Body Model)
V
200
ESD (Machine Model)
V
25
Notes:
1. Operation of this device above any one of
these parameters may cause permanent
damage.
2. Assumes DC quiescent conditions.
3. Source lead temperature is 25°C. Derate
4.3 mW/ °C for TL > 87 °C.
4. Thermal resistance measured using
150°C Liquid Crystal Measurement method.
5. Device can safely handle +3 dBm RF Input
Power as long asIGS is limited to 1 mA. IGS at
P1dB drive level is bias circuit dependent. See
applications section for additional information.
70
0.7 V
60
IDS (mA)
50
40
0.6 V
30
0.5 V
20
10
0.4 V
0.3V
0
0
1
2
3
4
VDS (V)
5
6
7
Figure 1. Typical I-V Curves.
(V GS = 0.1 V per step)
Product Consistency Distribution Charts [6, 7]
300
Cpk = 2.02
Stdev = 0.36
250
200
240
Cpk = 1.023
Stdev = 0.28
Cpk = 3.64
Stdev = 0.031
200
160
200
160
120
-3 Std
-3 Std
150
+3 Std
+3 Std
120
80
100
80
40
50
0
40
0
22
23
24
OIP3 (dBm)
Figure 2. OIP3 @ 2.7 V, 10 mA.
LSL = 22.0, Nominal = 24.2
25
26
15
16
17
GAIN (dB)
18
Figure 3. Gain @ 2.7 V, 10 mA.
USL = 18.5, LSL = 15.5, Nominal = 17.7
19
0
0.43
0.53
0.63
0.73
0.83
0.93
NF (dB)
Figure 4. NF @ 2.7 V, 10 mA.
USL = 0.9, Nominal = 0.6
Notes:
6. Distribution data sample size is 500 samples taken from 6 different wafers. Future wafers allocated to this product may have nominal values anywhere
between the upper and lower limits.
7. Measurements made on production test board. This circuit represents a trade-off between an optimal noise match and a realizeable match based on
production test equipment. Circuit losses have been de-embedded from actual measurements.
2
ATF-55143 Electrical Specifications
TA = 25°C, RF parameters measured in a test circuit for a typical device
Units
Min.
Typ.[2]
Max.
Vds = 2.7V, Ids = 10 mA
V
0.3
0.47
0.65
Threshold Voltage
Vds = 2.7V, Ids = 2 mA
V
0.18
0.37
0.53
Idss
Saturated Drain Current
Vds = 2.7V, Vgs = 0V
µA
—
0.1
3
Gm
Transconductance
Vds = 2.7V, gm = ∆Idss/ ∆Vgs;
∆Vgs = 0.75 – 0.7 = 0.05V
mmho
110
220
285
Igss
Gate Leakage Current
Vgd = Vgs = -2.7V
µA
—
—
95
NF
Noise Figure [1]
f = 2 GHz
f = 900 MHz
Vds = 2.7V, Ids = 10 mA
Vds = 2.7V, Ids = 10 mA
dB
dB
—
—
0.6
0.3
0.9
—
Ga
Associated Gain [1]
f = 2 GHz
f = 900 MHz
Vds = 2.7V, Ids = 10 mA
Vds = 2.7V, Ids = 10 mA
dB
dB
15.5
—
17.7
21.6
18.5
—
OIP3
Output 3rd Order
Intercept Point [1]
f = 2 GHz
f = 900 MHz
Vds = 2.7V, Ids = 10 mA
Vds = 2.7V, Ids = 10 mA
dBm
dBm
22.0
—
24.2
22.3
—
—
P1dB
1dB Compressed
Output Power [1]
f = 2 GHz
f = 900 MHz
Vds = 2.7V, Ids = 10 mA
Vds = 2.7V, Ids = 10 mA
dBm
dBm
—
—
14.4
14.2
—
—
Symbol
Parameter and Test Condition
Vgs
Operational Gate Voltage
Vth
Notes:
1. Measurements obtained using production test board described in Figure 5.
2. Typical values determined from a sample size of 500 parts from 6 wafers.
Input
50 Ohm
Transmission
Line Including
Gate Bias T
(0.3 dB loss)
Input
Matching Circuit
Γ_mag = 0.4
Γ_ang = 83°
(0.3 dB loss)
DUT
Output
Matching Circuit
Γ_mag = 0.5
Γ_ang = -26°
(1.2 dB loss)
50 Ohm
Transmission
Line Including
Drain Bias T
(0.3 dB loss)
Output
Figure 5. Block diagram of 2 GHz production test board used for Noise Figure, Associated Gain, P1dB, OIP3, and IIP3 measurements. This circuit
represents a trade-off between an optimal noise match, maximum OIP3 match and associated impedance matching circuit losses. Circuit losses
have been de-embedded from actual measurements.
3
ATF-55143 Typical Performance Curves
20
Fmin (dB)
GAIN (dB)
25
15
1.2
27
1.0
25
0.8
23
OIP3 (dBm)
30
0.6
0.4
10
19
0.2
2V, 10 mA
2.7V, 10 mA
5
17
2V, 10 mA
2.7V, 10 mA
1
2
3
4
5
6
2V, 10 mA
2.7V, 10 mA
15
0
0
21
0
1
FREQUENCY (GHz)
2
3
4
5
6
0
1
FREQUENCY (GHz)
Figure 6. Gain vs. Bias over Frequency.[1]
16
10
14
3
4
5
6
Figure 8. OIP3 vs. Bias over Frequency.[1]
Figure 7. Fmin vs. Frequency and Bias.
15
2
FREQUENCY (GHz)
21
5
19
GAIN (dB)
P1dB (dBm)
IIP3 (dBm)
20
12
18
17
10
0
2V, 10 mA
2.7V, 10 mA
8
-5
0
1
2
3
4
5
6
15
0
1
FREQUENCY (GHz)
3
4
5
6
0
16
33
14
0.50
31
12
0.45
29
10
0.40
0.35
0.30
10
15
20
25
30
27
25
Ids (mA)
Figure 12. Fmin vs. Ids and Vds at 2 GHz.
Notes:
1. Measurements at 2 GHz were made on a
fixed tuned production test board that was
tuned for optimal OIP3 match with reasonable
noise figure at 2.7 V, 10 mA bias. This circuit
represents a trade-off between optimal noise
match, maximum OIP3 match and a realizable
match based on production test board
requirements. Measurements taken above
and below 2 GHz were made using a double
19
20
25
30
35
8
4
2V
2.7V
3V
21
35
15
6
23
2V
2.7V
3V
0.25
IIP3 (dBm)
35
0.55
5
10
Figure 11. Gain vs. Ids and Vds at 2 GHz.[1]
0.60
0
5
Ids (mA)
Figure 10. P1dB vs. Bias over Frequency.[1,2]
OIP3 (dBm)
Fmin (dB)
2
FREQUENCY (GHz)
Figure 9. IIP3 vs. Bias over Frequency.[1]
0.20
2V
2.7V
3V
16
2V, 10 mA
2.7V, 10 mA
0
5
10
15
20
25
30
35
Ids (mA)
Figure 13. OIP3 vs. Ids and Vds at 2 GHz.[1]
stub tuner at the input tuned for low noise
and a double stub tuner at the output tuned
for maximum OIP3. Circuit losses have been
de-embedded from actual measurements.
2. P1dB measurements are performed with
passive biasing. Quiescent drain current, Idsq,
is set with zero RF drive applied. As P1dB is
approached, the drain current may increase or
decrease depending on frequency and dc bias
4
2V
2.7V
3V
2
0
0
5
10
15
20
25
30
35
Ids (mA)
Figure 14. IIP3 vs. Ids and Vds at 2 GHz.[1]
point. At lower values of Idsq, the device is
running close to class B as power output
approaches P1dB. This results in higher P1dB
and higher PAE (power added efficiency)
when compared to a device that is driven by a
constant current source as is typically done
with active biasing. As an example, at a VDS =
2.7V and Idsq = 5 mA, Id increases to 15mA as
a P1dB of +14.5 dBm is approached.
ATF-55143 Typical Performance Curves, continued
17
25
16
24
15
23
0.35
14
13
12
22
21
2V
2.7V
3V
0
5
10
15
20
25
30
2V
2.7V
3V
19
0.20
0.10
18
35
0
5
10
15
20
25
30
35
0
40
Ids (mA)
Figure 15. P1dB vs. Idsq and Vds at 2 GHz.[1,2]
Figure 16. Gain vs. Ids and Vds at 900 MHz. [1]
17
30
6
16
28
5
15
IIP3 (dBm)
3
2
1
20
2V
2.7V
3V
18
16
P1dB (dBm)
4
22
0
5
10
15
20
25
30
2V
2.7V
3V
-1
Ids (mA)
Figure 18. OIP3 vs. Ids and Vds at 900 MHz. [1]
Notes:
1. Measurements at 2 GHz were made on a
fixed tuned production test board that was
tuned for optimal OIP3 match with reasonable
noise figure at 2.7 V, 10 mA bias. This circuit
represents a trade-off between optimal noise
match, maximum OIP3 match and a realizable
match based on production test board
requirements. Measurements taken above
and below 2 GHz were made using a double
-2
15
20
25
0
5
10
15
20
35
13
12
25
30
2V
2.7V
3V
10
35
Ids (mA)
Figure 19. IIP3 vs. Ids and Vds at 900 MHz. [1]
stub tuner at the input tuned for low noise
and a double stub tuner at the output tuned
for maximum OIP3. Circuit losses have been
de-embedded from actual measurements.
2. P1dB measurements are performed with
passive biasing. Quiescent drain current, Idsq,
is set with zero RF drive applied. As P1dB is
approached, the drain current may increase or
decrease depending on frequency and dc bias
5
30
14
11
0
35
10
Figure 17. Fmin vs. Ids and Vds at 900 MHz.
7
24
5
Ids (mA)
32
26
2V
2.7V
3V
0.15
Idsq (mA)
OIP3 (dBm)
0.25
20
11
10
Fmin (dB)
GAIN (dB)
P1dB (dBm)
0.30
9
0
5
10
15
20
25
30
35
Idsq (mA)
Figure 20. P1dB vs. Idsq and Vds at
900 MHz. [1,2]
point. At lower values of Idsq, the device is
running close to class B as power output
approaches P1dB. This results in higher P1dB
and higher PAE (power added efficiency)
when compared to a device that is driven by a
constant current source as is typically done
with active biasing. As an example, at a VDS =
2.7V and Idsq = 5 mA, Id increases to 15 mA as
a P1dB of +14.5 dBm is approached.
ATF-55143 Typical Performance Curves, continued
28
2.0
25°C
-40°C
85°C
24
18
OIP3 (dBm)
1.5
Fmin (dB)
23
GAIN (dB)
25
25°C
-40°C
85°C
1.0
23
22
21
13
25°C
-40°C
85°C
0.5
20
8
0
0
1
2
3
4
5
6
19
0
1
FREQUENCY (GHz)
2
3
4
5
6
FREQUENCY (GHz)
Figure 21. Gain vs. Temperature and
Frequency with bias at 2.7V, 10 mA.[1]
1
2
3
4
5
6
FREQUENCY (GHz)
Figure 22. Fmin vs. Frequency and
Temperature at 2.7V, 10 mA.
16
0
Figure 23. OIP3 vs. Temperature and
Frequency with bias at 2.7V, 10 mA.[1]
16
14
15
12
8
P1dB (dBm)
IIP3 (dBm)
10
6
4
2
14
13
12
25°C
-40°C
85°C
0
-2
25°C
-40°C
85°C
11
-4
-6
10
0
1
2
3
4
5
6
FREQUENCY (GHz)
Figure 24. IIP3 vs. Temperature and
Frequency with bias at 2.7V, 10 mA.[1]
Notes:
1. Measurements at 2 GHz were made on a
fixed tuned production test board that was
tuned for optimal OIP3 match with reasonable
noise figure at 2.7 V, 10 mA bias. This circuit
represents a trade-off between optimal noise
match, maximum OIP3 match and a realizable
match based on production test board
requirements. Measurements taken above
and below 2 GHz were made using a double
0
1
2
3
4
5
6
FREQUENCY (GHz)
Figure 25. P1dB vs. Temperature and
Frequency with bias at 2.7V, 10 mA.[1,2]
stub tuner at the input tuned for low noise
and a double stub tuner at the output tuned
for maximum OIP3. Circuit losses have been
de-embedded from actual measurements.
2. P1dB measurements are performed with
passive biasing. Quiescent drain current, Idsq,
is set with zero RF drive applied. As P1dB is
approached, the drain current may increase or
decrease depending on frequency and dc bias
6
point. At lower values of Idsq, the device is
running close to class B as power output
approaches P1dB. This results in higher P1dB
and higher PAE (power added efficiency)
when compared to a device that is driven by a
constant current source as is typically done
with active biasing. As an example, at a VDS =
2.7V and Idsq = 5 mA, Id increases to 15 mA as
a P1dB of +14.5 dBm is approached.
ATF-55143 Typical Scattering Parameters, VDS = 2V, IDS = 10 mA
Freq.
GHz
Mag.
S11
Ang.
dB
S21
Mag.
Ang.
Mag.
S12
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
0.1
0.5
0.9
1.0
1.5
1.9
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
0.998
0.963
0.894
0.879
0.793
0.731
0.718
0.657
0.611
0.561
0.558
0.566
0.583
0.601
0.636
0.708
0.76
0.794
0.819
0.839
0.862
0.853
0.868
-6.5
-31.7
-54.7
-60.1
-84.1
-100.8
-104.7
-123.7
-141.8
-177.5
149.4
122.5
99.7
77.7
57.5
38.3
21.8
7.6
-7.8
-23.6
-37.9
-51.0
-60.1
20.78
20.37
19.57
19.32
18.07
17.11
16.86
15.79
14.80
13.10
11.52
10.06
8.78
7.62
6.63
5.66
4.45
3.32
2.29
1.27
-0.19
-1.83
-3.25
10.941
10.434
9.516
9.252
8.009
7.166
6.970
6.159
5.494
4.517
3.768
3.183
2.748
2.404
2.147
1.919
1.670
1.465
1.302
1.157
0.978
0.810
0.688
174.9
154.8
137.1
133.0
115.2
102.8
100.1
86.6
74.2
51.0
29.3
9.4
-9.2
-27.4
-45.3
-64.6
-83.1
-100.2
-117.9
-136.7
-155.2
-171.8
173.9
0.006
0.029
0.048
0.051
0.066
0.075
0.077
0.084
0.090
0.098
0.102
0.104
0.106
0.105
0.110
0.117
0.119
0.121
0.121
0.122
0.115
0.109
0.107
86.1
70.2
56.9
54
41.5
33.6
31.8
23.7
16.5
3.6
-8.3
-18.4
-28.5
-38.4
-44.7
-56.6
-68.2
-79.3
-91.4
-104.4
-117.7
-129.4
-139.9
0.796
0.762
0.711
0.693
0.622
0.570
0.559
0.503
0.446
0.343
0.269
0.224
0.189
0.140
0.084
0.08
0.151
0.217
0.262
0.327
0.431
0.522
0.588
-4.2
-20.4
-34.4
-37.3
-49.6
-57.1
-58.7
-66.3
-73
-87.6
-104.4
-120.4
-137.3
-149.3
-170
109.3
64.5
40.8
20.8
0.5
-16.4
-28.6
-41.6
32.61
25.56
22.97
22.59
20.84
19.80
19.57
18.65
17.86
16.64
15.68
10.94
9.33
8.14
7.72
8.03
7.90
7.66
7.36
7.05
6.52
5.22
4.90
18.0
0.911
-70.3
-4.44
0.601
158.5
0.102
-153.2
0.641
-55.8
5.94
Typical Noise Parameters, VDS = 2V, IDS = 10 mA
Fmin
dB
Γopt
Mag.
Γopt
Ang.
Rn/50
Ga
dB
0.5
0.9
1.0
1.9
2.0
2.4
3.0
3.9
5.0
5.8
6.0
7.0
8.0
9.0
10.0
0.21
0.26
0.27
0.42
0.43
0.50
0.59
0.73
0.92
1.04
1.06
1.22
1.42
1.57
1.71
0.65
0.60
0.55
0.55
0.54
0.45
0.40
0.26
0.21
0.24
0.23
0.28
0.33
0.43
0.54
17.5
22.6
27.0
49.4
51.7
61.5
78.1
111.9
172.5
-151.5
-144.5
-107.1
-75.5
-51.5
-33.3
0.13
0.12
0.12
0.11
0.11
0.10
0.09
0.07
0.06
0.07
0.08
0.14
0.24
0.38
0.57
24.84
22.86
22.39
18.77
18.42
17.14
15.50
13.62
12.05
11.28
11.12
10.45
9.84
9.10
8.03
35
30
MSG/MAG and |S 21 | 2 (dB)
Freq
GHz
25
20
MSG
15
10
|S 21 |
5
2
0
-5
-10
0
5
10
15
20
FREQUENCY (GHz)
Figure 26. MSG/MAG and |S 21| 2 vs.
Frequency at 2V, 10 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of
16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements Fmin is calculated. Refer to
the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference planeis at the end of the gate
lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source
landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via holes are placed
within 0.010 inch from each source lead contact point, one via on each side of that point.
7
ATF-55143 Typical Scattering Parameters, VDS = 2V, IDS = 15 mA
Freq.
GHz
Mag.
S11
Ang.
dB
S21
Mag.
Ang.
Mag.
S12
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
0.1
0.5
0.997
0.953
-7.1
-34.5
22.33
21.82
13.074
12.333
174.4
153.0
0.006
0.027
85.7
69.4
0.752
0.712
-4.6
-22.1
33.38
26.60
0.9
1.0
0.873
0.856
-58.8
-64.6
20.86
20.58
11.042
10.693
134.4
130.3
0.044
0.047
56.3
53.3
0.654
0.636
-36.7
-39.6
24.00
23.57
1.5
1.9
0.759
0.695
-89.3
-106.2
19.14
18.06
9.059
7.998
112.2
100.0
0.060
0.068
41.6
34.4
0.560
0.509
-51.8
-59.0
21.79
20.70
2.0
2.5
0.681
0.621
-110.2
-129.3
17.8
16.62
7.762
6.773
97.2
83.9
0.070
0.076
32.8
25.6
0.498
0.443
-60.5
-67.5
20.45
19.50
3.0
4.0
0.578
0.536
-147.4
177.3
15.54
13.71
5.985
4.850
71.8
49.4
0.082
0.091
19.4
7.9
0.390
0.295
-73.6
-87.3
18.63
17.27
5.0
6.0
0.541
0.554
145.1
119.1
12.09
10.59
4.020
3.384
28.4
9.0
0.096
0.101
-3.0
-12.7
0.225
0.183
-104.3
-120.8
16.22
10.47
7.0
8.0
0.574
0.594
97.0
75.5
9.3
8.13
2.917
2.549
-9.1
-27.0
0.105
0.106
-23.0
-33.1
0.150
0.101
-138.4
-149.7
9.34
8.32
9.0
10.0
0.63
0.703
55.9
37.3
7.12
6.14
2.271
2.028
-44.6
-63.5
0.113
0.121
-40.4
-53.2
0.047
0.078
-175.2
82.0
7.99
8.33
11.0
12.0
0.757
0.793
21.1
7.1
4.92
3.79
1.762
1.547
-81.7
-98.5
0.123
0.125
-65.3
-76.9
0.162
0.231
51.1
31.3
8.19
7.98
13.0
14.0
0.818
0.841
-8.2
-23.8
2.77
1.76
1.376
1.225
-115.9
-134.3
0.125
0.125
-89.5
-102.7
0.275
0.339
12.8
-5.5
7.68
7.43
15.0
16.0
17.0
18.0
0.863
0.856
0.871
0.913
-38.1
-51.2
-60.2
-70.4
0.32
-1.29
-2.66
-3.8
1.038
0.862
0.736
0.646
-152.5
-168.8
177.0
161.7
0.118
0.111
0.109
0.105
-116.3
-128.0
-138.6
-151.9
0.438
0.524
0.586
0.636
-21.0
-32.0
-44.4
-58.1
6.85
5.58
5.27
6.28
Typical Noise Parameters, VDS = 2V, IDS = 15 mA
Fmin
dB
Γopt
Mag.
Γopt
Ang.
Rn/50
Ga
dB
0.5
0.21
0.627
18.7
0.1
25.41
0.9
1.0
1.9
0.25
0.26
0.4
0.56
0.53
0.51
23.6
27.3
49.7
0.1
0.1
0.09
23.47
23.02
19.44
2.0
0.41
0.5
52.6
0.09
19.09
2.4
3.0
3.9
0.48
0.57
0.7
0.41
0.35
0.22
62.3
80.4
118.4
0.09
0.08
0.06
17.81
16.17
14.25
5.0
0.86
0.2
-176.5
0.06
12.6
5.8
6.0
7.0
0.99
1.03
1.16
0.23
0.23
0.29
-140.5
-134.6
-99.3
0.08
0.08
0.14
11.77
11.6
10.86
8.0
9.0
10.0
1.35
1.49
1.62
0.35
0.43
0.54
-69.3
-47.9
-30.8
0.25
0.39
0.57
10.22
9.48
8.47
40
35
MSG/MAG and |S 21 | 2 (dB)
Freq
GHz
30
25
MSG
20
15
10
|S 21 | 2
5
0
-5
-10
0
5
10
15
20
FREQUENCY (GHz)
Figure 27. MSG/MAG and |S 21| 2 vs.
Frequency at 2V, 15 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of
16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin is calculated.
Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the gate
lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source
landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via holes are placed
within 0.010 inch from each source lead contact point, one via on each side of that point.
8
ATF-55143 Typical Scattering Parameters, VDS = 2V, IDS = 20 mA
Freq.
GHz
Mag.
S11
Ang.
dB
S21
Mag.
Ang.
Mag.
S12
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
0.1
0.997
-7.5
23.23
14.512
174.2
0.006
85.5
0.722
-4.8
33.38
0.5
0.9
0.947
0.858
-36.2
-61.3
22.66
21.59
13.582
12.011
151.8
132.8
0.026
0.041
69
56
0.679
0.618
-22.9
-37.7
26.60
24.00
1.0
0.839
-67.2
21.29
11.602
128.6
0.044
53.2
0.599
-40.6
23.57
1.5
0.738
-92.4
19.74
9.703
110.4
0.056
42.1
0.523
-52.5
21.79
1.9
2.0
0.673
0.659
-109.4
-113.5
18.59
18.32
8.5
8.238
98.3
95.5
0.063
0.065
35.5
34
0.474
0.463
-59.3
-60.7
20.70
20.45
2.5
0.599
-132.6
17.07
7.135
82.4
0.071
27.5
0.411
-67.1
19.50
3.0
4.0
0.558
0.521
-150.6
174.4
15.95
14.06
6.272
5.047
70.5
48.5
0.077
0.086
21.8
11.1
0.361
0.272
-72.7
-85.6
18.63
17.27
5.0
0.531
142.8
12.40
4.171
28
0.093
0.7
0.205
-102.3
16.22
6.0
7.0
0.546
0.568
117.4
95.6
10.89
9.60
3.505
3.021
8.9
-9
0.099
0.104
-9
-19.4
0.166
0.134
-118.7
-136.5
10.47
9.34
8.0
0.588
74.4
8.42
2.637
-26.7
0.106
-29.8
0.086
-146.2
8.32
9.0
10.0
11.0
0.625
0.699
0.754
55.2
36.8
20.9
7.41
6.43
5.21
2.348
2.097
1.823
-44.1
-62.9
-80.9
0.115
0.123
0.125
-37.5
-50.7
-63.2
0.032
0.077
0.165
-171.2
71.3
46
7.99
8.33
8.19
12.0
13.0
14.0
0.791
0.818
0.839
6.9
-8.2
-23.8
4.08
3.07
2.07
1.60
1.424
1.269
-97.5
-114.7
-133.1
0.127
0.128
0.127
-75.1
-87.8
-101.4
0.235
0.278
0.340
27.6
9.8
-8.1
7.98
7.68
7.43
15.0
16.0
0.864
0.858
-38.1
-51.1
0.65
-0.95
1.078
0.896
-151
-167.3
0.12
0.113
-114.9
-126.8
0.440
0.523
-22.8
-33.4
6.85
5.58
17.0
0.873
-60.2
-2.30
0.768
178.6
0.111
-137.5
0.583
-45.6
5.27
18.0
0.917
-70.4
-3.41
0.675
163.4
0.106
-150.9
0.632
-59
6.28
Typical Noise Parameters, VDS = 2V, IDS = 20 mA
Fmin
dB
Γopt
Mag.
Γopt
Ang.
Rn/50
Ga
dB
0.5
0.9
1.0
1.9
2.0
2.4
3.0
3.9
5.0
5.8
6.0
7.0
8.0
9.0
0.21
0.25
0.26
0.39
0.4
0.48
0.56
0.69
0.85
0.98
1.02
1.16
1.34
1.49
0.63
0.54
0.53
0.49
0.47
0.38
0.32
0.2
0.2
0.24
0.24
0.3
0.36
0.45
18.4
24.4
28.8
50.6
52.8
63.6
82
125.1
-167.2
-133.4
-128.4
-94.8
-66.4
-45.7
0.1
0.09
0.09
0.09
0.09
0.08
0.07
0.06
0.06
0.08
0.09
0.15
0.25
0.4
25.67
23.78
23.34
19.84
19.5
18.24
16.61
14.67
12.97
12.09
10.89
11.12
10.45
9.73
10.0
1.62
0.55
-28.6
0.6
8.8
40
35
MSG/MAG and |S 21 | 2 (dB)
Freq
GHz
30
25
20
MSG
15
10
5
|S 21 |
2
0
-5
-10
0
5
10
15
20
FREQUENCY (GHz)
Figure 28. MSG/MAG and |S 21| 2 vs.
Frequency at 2V, 20 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of
16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin is calculated.
Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the gate
lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source
landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via holes are placed
within 0.010 inch from each source lead contact point, one via on each side of that point.
9
ATF-55143 Typical Scattering Parameters, VDS = 2.7V, IDS = 10 mA
Freq.
GHz
S11
Mag.
Ang.
dB
S21
Mag.
S12
Ang.
Mag.
S22
Ang.
Mag.
MSG/MAG
dB
Ang.
0.1
0.998
-6.4
20.86
11.044
174.9
0.006
86.2
0.819
-3.9
32.65
0.5
0.963
-31.2
20.46
10.549
155
0.026
70.4
0.786
-19.1
26.08
0.9
1.0
0.896
0.881
-53.8
-59.2
19.68
19.44
9.641
9.376
137.5
133.4
0.043
0.047
57.3
54.4
0.737
0.72
-32
-34.7
23.51
23.00
1.5
0.794
-83
18.21
8.133
115.6
0.06
42.2
0.651
-46
21.32
1.9
0.732
-99.5
17.25
7.284
103.3
0.068
34.4
0.602
-52.9
20.30
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
0.718
0.655
0.608
0.553
0.548
0.556
0.573
0.590
0.625
0.699
0.752
0.789
0.815
0.838
0.862
0.856
0.872
0.915
-103.4
-122.3
-140.2
-175.9
150.9
123.9
100.9
78.6
58.4
39.2
22.7
8.4
-7
-22.8
-37.2
-50.5
-59.7
-70
17.01
15.94
14.96
13.28
11.74
10.30
9.04
7.89
6.94
6.03
4.89
3.78
2.78
1.81
0.37
-1.27
-2.73
-3.96
7.087
6.267
5.599
4.615
3.862
3.272
2.83
2.481
2.224
2.002
1.755
1.546
1.378
1.231
1.044
0.864
0.730
0.634
100.6
87.1
74.8
51.7
30.2
10.3
-8.3
-26.5
-44.3
-63.6
-82.3
-99.8
-117.8
-137
-155.9
-173.3
171.9
156
0.07
0.076
0.082
0.089
0.092
0.094
0.096
0.096
0.102
0.112
0.115
0.12
0.122
0.124
0.119
0.113
0.111
0.107
32.6
24.8
17.9
5.6
-5.4
-14.6
-23.9
-32.8
-38
-49.7
-61.1
-72.4
-84.7
-98.3
-111.8
-124.4
-135.6
-149.4
0.592
0.538
0.485
0.39
0.321
0.280
0.247
0.204
0.152
0.098
0.112
0.167
0.211
0.274
0.387
0.491
0.568
0.628
-54.5
-61.3
-67.3
-80.1
-94.7
-109
-124.1
-134.3
-146.7
166.8
100
62.3
37
12.6
-7.6
-21.5
-35.9
-51.2
20.05
19.16
18.34
17.15
16.23
10.63
9.27
8.16
7.82
8.34
8.24
8.17
7.93
7.71
7.14
5.78
5.49
6.84
Typical Noise Parameters, VDS = 2.7V, IDS = 10 mA
Fmin
dB
Γopt
Mag.
Γopt
Ang.
Rn/50
Ga
dB
0.5
0.9
1.0
1.9
2.0
2.4
3.0
3.9
5.0
5.8
6.0
7.0
8.0
9.0
10.0
0.2
0.26
0.27
0.39
0.4
0.48
0.57
0.72
0.88
1.02
1.04
1.19
1.39
1.54
1.65
0.64
0.59
0.54
0.54
0.54
0.45
0.39
0.26
0.2
0.22
0.21
0.26
0.32
0.41
0.53
19
22.7
26
48.3
49.9
59.8
75.6
108.7
167.5
-154.8
-147.8
-107.9
-75
-51.6
-33.6
0.12
0.12
0.12
0.11
0.11
0.1
0.09
0.07
0.06
0.07
0.08
0.13
0.23
0.36
0.54
25.29
23.24
22.76
19.01
18.66
17.35
15.69
13.79
12.26
11.52
11.37
10.76
10.2
9.48
8.38
35
30
MSG/MAG and |S 21 | 2 (dB)
Freq
GHz
25
20
MSG
15
10
5
|S 21 | 2
0
-5
-10
0
5
10
15
20
FREQUENCY (GHz)
Figure 29. MSG/MAG and |S 21| 2 vs.
Frequency at 2.7V, 10 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of
16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin is calculated.
Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the gate
lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source
landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via holes are placed
within 0.010 inch from each source lead contact point, one via on each side of that point.
10
ATF-55143 Typical Scattering Parameters, VDS = 2.7V, IDS = 20 mA
Freq.
GHz
Mag.
S11
Ang.
dB
S21
Mag.
Ang.
Mag.
S12
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
0.1
0.5
0.9
1.0
1.5
0.997
0.947
0.860
0.840
0.739
-7.4
-35.8
-60.8
-66.6
-91.7
23.29
22.72
21.67
21.37
19.83
14.603
13.682
12.116
11.705
9.802
174.2
152
133
128.8
110.6
0.005
0.024
0.038
0.041
0.051
85.8
69.2
56.2
53.4
42.4
0.755
0.713
0.652
0.633
0.56
-4.4
-21.1
-34.6
-37.3
-48
34.65
27.56
25.04
24.56
22.84
1.9
2.0
2.5
3.0
4.0
5.0
6.0
0.672
0.658
0.597
0.554
0.515
0.523
0.538
-108.6
-112.7
-131.7
-149.7
175.4
143.7
118.2
18.68
18.41
17.16
16.04
14.17
12.55
11.06
8.587
8.323
7.21
6.341
5.114
4.239
3.572
98.5
95.8
82.7
70.9
49.1
28.6
9.6
0.057
0.059
0.065
0.069
0.078
0.084
0.09
36
34.5
28.4
23
13.3
3.7
-5
0.513
0.503
0.455
0.409
0.328
0.267
0.232
-54
-55.3
-60.9
-65.7
-76.7
-90.7
-104.8
21.78
21.49
20.45
19.63
18.17
17.03
10.28
7.0
8.0
0.559
0.579
96.4
75.2
9.78
8.62
3.084
2.699
-8.4
-25.9
0.095
0.098
-14.7
-24.2
0.201
0.162
-119.6
-127.4
9.37
8.50
9.0
10.0
11.0
12.0
13.0
14.0
15.0
0.615
0.690
0.748
0.787
0.816
0.841
0.867
56
37.7
21.7
7.9
-7.3
-22.9
-37.3
7.65
6.73
5.57
4.48
3.5
2.55
1.15
2.413
2.171
1.9
1.675
1.496
1.341
1.142
-43.3
-62.1
-80.3
-97.3
-114.9
-133.5
-152.1
0.107
0.117
0.122
0.126
0.128
0.13
0.124
-31
-44
-56.4
-68.5
-81.4
-95.1
-109.2
0.113
0.055
0.096
0.164
0.210
0.277
0.386
-136.5
160.9
75.9
45.5
23.7
3
-14.3
8.31
8.81
8.85
8.75
8.62
8.48
7.84
16.0
17.0
0.862
0.877
-50.5
-59.7
-0.44
-1.83
0.95
0.81
-169
176.3
0.118
0.116
-121.9
-133.3
0.483
0.555
-26.3
-39.5
6.39
6.08
18.0
0.921
-70
-2.99
0.709
160.6
0.111
-147.1
0.612
-53.9
7.60
Typical Noise Parameters, VDS = 2.7V, IDS = 20 mA
Fmin
dB
Γopt
Mag.
Γopt
Ang.
Rn/50
Ga
dB
0.5
0.9
1.0
0.20
0.25
0.26
0.65
0.55
0.53
17.6
23.6
28.3
0.1
0.1
0.1
25.79
23.9
23.45
1.9
2.0
0.39
0.4
0.49
0.48
49
51.5
0.09
0.09
19.94
19.6
2.4
3.0
3.9
5.0
5.8
6.0
7.0
0.47
0.56
0.69
0.85
0.98
1.01
1.15
0.38
0.32
0.19
0.18
0.22
0.22
0.29
62
79.6
120
-168.8
-135.4
-128.7
-94.6
0.08
0.07
0.06
0.06
0.08
0.09
0.15
18.34
16.71
14.8
13.14
12.3
12.12
11.38
8.0
9.0
1.32
1.47
0.35
0.44
-66.7
-45.7
0.25
0.38
10.74
10.04
10.0
1.58
0.54
-28.6
0.57
9.1
40
35
MSG/MAG and |S21 | 2 (dB)
Freq
GHz
30
25
20
MSG
15
10
5
|S 21 |
2
0
-5
0
5
10
15
20
FREQUENCY (GHz)
Figure 30. MSG/MAG and |S 21 | 2 vs.
Frequency at 2.7V, 20 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of
16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin is calculated.
Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the gate
lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source
landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via holes are placed
within 0.010 inch from each source lead contact point, one via on each side of that point.
11
ATF-55143 Typical Scattering Parameters, VDS = 3V, IDS = 20 mA
Freq.
GHz
Mag.
S11
Ang.
dB
S21
Mag.
Ang.
Mag.
S12
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
0.1
0.5
0.998
0.947
-7.4
-35.9
23.34
22.77
14.697
13.762
174.2
151.9
0.005
0.023
85.1
69.2
0.763
0.721
-4.3
-20.6
34.68
27.77
0.9
1.0
1.5
1.9
2.0
0.859
0.839
0.738
0.671
0.657
-60.9
-66.7
-91.8
-108.7
-112.7
21.71
21.41
19.86
18.71
18.44
12.178
11.764
9.844
8.621
8.354
132.9
128.7
110.5
98.5
95.7
0.037
0.039
0.050
0.055
0.057
56.2
53.5
42.5
36.2
34.8
0.661
0.642
0.570
0.524
0.514
-33.8
-36.3
-46.7
-52.5
-53.7
25.17
24.79
22.94
21.95
21.66
2.5
3.0
4.0
5.0
0.595
0.552
0.513
0.521
-131.7
-149.8
175.4
143.8
17.19
16.07
14.2
12.58
7.233
6.36
5.13
4.256
82.7
70.9
49.1
28.7
0.062
0.067
0.075
0.081
28.7
23.5
14.2
4.9
0.468
0.423
0.345
0.287
-59.1
-63.8
-74.3
-87.7
20.67
19.77
18.35
11.97
6.0
7.0
8.0
9.0
0.536
0.557
0.577
0.613
118.3
96.5
75.3
56.2
11.1
9.83
8.67
7.71
3.588
3.1
2.715
2.43
9.7
-8.2
-25.8
-43.1
0.087
0.092
0.095
0.105
-3.5
-12.9
-22.1
-28.7
0.254
0.224
0.187
0.140
-101.6
-116.1
-124.3
-133.5
10.25
9.37
8.51
8.39
10.0
11.0
12.0
13.0
0.687
0.746
0.787
0.816
38
22
8.1
-7
6.81
5.67
4.59
3.62
2.192
1.922
1.697
1.516
-61.8
-80.2
-97.2
-114.9
0.116
0.121
0.126
0.128
-41.7
-54
-66.1
-79.1
0.075
0.084
0.145
0.191
-178.8
94
54.4
30
8.96
9.02
9.06
8.93
14.0
15.0
16.0
0.842
-22.6
2.67
0.869
0.863
-37
-50.2
1.3
-0.29
1.36
1.161
0.967
-133.6
-152.3
-169.6
0.131
0.126
0.1200
-93
-107.2
-120.2
0.256
0.369
0.471
8
-10.9
-23.5
8.92
8.24
6.61
17.0
0.879
-59.6
-1.7
0.822
175.6
0.118
-131.9
0.548
-37.3
6.30
18.0
0.924
-69.8
-2.87
0.719
159.7
0.113
-145.9
0.608
-52.2
8.42
Typical Noise Parameters, VDS = 3V, IDS = 20 mA
Fmin
dB
Γopt
Mag.
Γopt
Ang.
Rn/50
Ga
dB
0.5
0.9
1.0
0.18
0.24
0.25
0.63
0.54
0.53
17.6
23.4
27.9
0.1
0.1
0.1
25.89
23.98
23.53
1.9
0.39
0.48
48.4
0.09
20
2.0
2.4
3.0
0.4
0.47
0.56
0.47
0.39
0.32
51.6
61.9
78.7
0.09
0.08
0.07
19.66
18.4
16.77
3.9
5.0
5.8
0.68
0.85
0.97
0.19
0.19
0.22
119.8
-170.4
-135.1
0.06
0.06
0.08
14.85
13.21
12.37
6.0
7.0
1.01
1.14
0.22
0.28
-128.4
-94.7
0.09
0.14
12.2
11.47
8.0
9.0
1.31
1.47
0.35
0.44
-66.8
-45.6
0.25
0.38
10.84
10.15
10.0
1.59
0.54
-28.9
0.57
9.22
40
35
MSG/MAG and |S 21 | 2 (dB)
Freq
GHz
30
25
MSG
20
15
10
|S 21 | 2
5
0
-5
0
5
10
15
20
FREQUENCY (GHz)
Figure 31. MSG/MAG and |S 21 | 2 vs.
Frequency at 3V, 20 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of
16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin is calculated.
Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the gate
lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source
landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diamet er via holes are placed
within 0.010 inch from each source lead contact point, one via on each side of that point.
12
ATF-55143 Typical Scattering Parameters, VDS = 3V, IDS = 30 mA
Freq.
GHz
Mag.
S11
Ang.
dB
S21
Mag.
Ang.
Mag.
S12
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
0.1
0.5
0.996
0.937
-7.9
-38.1
24.3
23.64
16.407
15.205
173.9
150.4
0.005
0.021
85.6
68.8
0.729
0.683
-4.5
-21.2
35.16
28.60
0.9
1.0
1.5
0.840
0.819
0.712
-64.1
-70.1
-95.7
22.44
22.11
20.43
13.246
12.753
10.507
130.9
126.6
108.4
0.034
0.036
0.046
56.1
53.5
43.4
0.620
0.601
0.531
-34.3
-36.8
-46.5
25.91
25.49
23.59
1.9
2.0
2.5
0.646
0.631
0.571
-112.8
-116.8
-135.8
19.2
18.91
17.59
9.117
8.823
7.578
96.4
93.7
80.9
0.051
0.052
0.057
37.7
36.6
31.3
0.488
0.479
0.437
-51.8
-52.9
-57.7
22.52
22.30
21.24
3.0
4.0
5.0
6.0
0.531
0.499
0.512
0.529
-153.9
171.8
140.9
116
16.42
14.49
12.84
11.35
6.625
5.303
4.386
3.693
69.4
48.1
28.1
9.4
0.062
0.071
0.078
0.085
26.6
18.1
9.2
0.7
0.398
0.328
0.273
0.242
-61.8
-71.6
-84.7
-98.5
20.29
18.73
11.26
10.12
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
0.552
0.573
0.609
0.684
0.744
0.786
0.816
0.842
0.870
0.866
0.882
94.7
73.9
55.1
37.3
21.6
7.9
-7.2
-22.8
-37.1
-50.3
-59.7
10.07
8.91
7.94
7.05
5.91
4.83
3.86
2.93
1.56
-0.01
-1.4
3.188
2.79
2.496
2.251
1.975
1.744
1.56
1.401
1.197
0.998
0.851
-8.3
-25.6
-42.7
-61.3
-79.5
-96.4
-113.9
-132.6
-151.1
-168.2
177
0.092
0.096
0.107
0.118
0.123
0.128
0.131
0.133
0.128
0.122
0.12
-9
-18.6
-25.8
-39.2
-51.9
-64.3
-77.5
-91.7
-106
-119.1
-130.8
0.214
0.179
0.134
0.064
0.075
0.141
0.187
0.250
0.367
0.467
0.543
-112.9
-120.5
-128.4
-173.3
87.5
49.7
26.4
5.1
-12.6
-24.8
-38.2
9.45
8.67
8.60
9.20
9.28
9.36
9.40
9.38
8.55
6.86
6.56
18.0
0.927
-69.9
-2.55
0.746
161.2
0.115
-144.8
0.602
-52.8
8.12
Typical Noise Parameters, VDS = 3V, IDS = 30 mA
Fmin
dB
Γopt
Mag.
Γopt
Ang.
Rn/50
Ga
dB
0.5
0.19
0.59
18.4
0.09
26.27
0.9
1.0
0.25
0.26
0.5
0.52
25.5
30.7
0.09
0.09
24.41
23.98
1.9
0.41
0.44
50.6
0.08
20.51
2.0
0.42
0.43
54.5
0.08
20.18
2.4
3.0
3.9
0.49
0.59
0.72
0.34
0.27
0.17
65.1
84.7
132.6
0.08
0.07
0.06
18.92
17.28
15.33
5.0
5.8
6.0
0.88
1.02
1.06
0.19
0.24
0.25
-156.2
-125.3
-118.8
0.06
0.09
0.1
13.61
12.71
12.52
7.0
8.0
9.0
1.2
1.37
1.53
0.32
0.39
0.47
-88.8
-62.7
-43.1
0.17
0.28
0.43
11.73
11.08
10.41
10.0
1.66
0.57
-27
0.65
9.58
40
35
MSG/MAG and |S 21 | 2 (dB)
Freq
GHz
30
25
20
MSG
15
10
|S 21 | 2
5
0
-5
0
5
10
15
20
FREQUENCY (GHz)
Figure 32. MSG/MAG and |S 21 | 2 vs.
Frequency at 3V, 30 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of
16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin is calculated.
Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the gate
lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source
landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via holes are placed
within 0.010 inch from each source lead contact point, one via on each side of that point.
13
ATF-55143 Applications
Information
C4
C1
INPUT
Q1
Zo
L1
L4
L2
Introduction
Agilent Technologies’s ATF-55143
is a low noise enhancement mode
PHEMT designed for use in low
cost commercial applications in
the VHF through 6 GHz frequency
range. As opposed to a typical
depletion mode PHEMT where the
gate must be made negative with
respect to the source for proper
operation, an enhancement mode
PHEMT requires that the gate be
made more positive than the
source for normal operation.
Therefore a negative power
supply voltage is not required for
an enhancement mode device.
Biasing an enhancement mode
PHEMT is much like biasing the
typical bipolar junction transistor.
Instead of a 0.7V base to emitter
voltage, the ATF-55143 enhancement mode PHEMT requires
about a 0.47V potential between
the gate and source for a nominal
drain current of 10 mA.
Matching Networks
The techniques for im pedance
matching an enhancement mode
device are very similar to those
for matching a depletion mode
device. The only difference is in
the method of supplying gate
bias. S and Noise Parameters for
various bias conditions are listed
in this data sheet. The circuit
shown in Figure 1 shows a typical
LNA circuit normally used for
900 and 1900 MHz applications
(Consult the Agilent Technologies
website for application notes
covering specific applications).
High pass impedance matching
networks consisting of L1/C1 and
L4/C4 pr ovide the appropriate
match for noise figure, gain, S11
and S22. The high pass structure
also provides low frequency gain
reduction which can be beneficial
from the standpoint of improving
out-of-band rejection.
R4
OUTPUT
Zo
L3
C2
C5
R3
R5
R1
C3
C6
R2
Vdd
Figure 1. Typical ATF-55143 LNA with Passive
Biasing.
Capacitors C2 and C5 pr ovide a
low impedance in-band RF
bypass for the matching networks. Resistors R3 and R4
provide a very important low
frequency termination for the
device. The resistive termination
improves low frequency stability.
Capacitors C3 and C6 provide
the low frequency RF bypass for
resistors R3 and R4. Their value
should be chosen carefully as C3
and C6 also provide a termination for low frequency mixing
products. These mixing products
are as a result of two or more inband signals mixing and producing third order in-band distortion
products. The low frequency or
difference mixing products are
terminated by C3 and C6. For
best suppression of third order
distortion products based on the
CDMA 1.25 MHz signal spacing,
C3 and C6 should be 0.1 µF in
value. Smaller values of capacitance will not suppress the
generation of the 1.25 MHz
difference signal and as a result
will show up as poorer two tone
IP3 results.
Bias Networks
One of the major advantages of
the enhancement mode technology is that it allows the designer
to be able to dc ground the
source leads and then merely
apply a positive voltage on the
gate to set the desired amount of
quiescent drain cur rent Id.
14
Whereas a depletion mode
PHEMT pulls maximum drain
current when Vgs = 0V, an enhancement mode PHEMT pulls
only a small amount of leakage
current when Vgs =0 V. Only when
Vgs is increased above Vth , the
device threshold voltage, will
drain cur rent star t to flow. At a
Vds of 2.7V and a nominal Vgs of
0.47V, the drain cur rent Id will be
approximately 10 mA. The data
sheet suggests a minimum and
maximum Vgs over which the
desired amount of drain current
will be achieved. It is also important to note that if the gate
terminal is lef t open circuited,
the device will pull some amount
of drain current due to leakage
current creating a voltage differential between the gate and
source terminals.
Passive Biasing
Passive biasing of the ATF-55143
is accomplished by the use of a
voltage divider consisting of R1
and R2. The voltage for the
divider is deriv ed from the drain
voltage which provides a form of
voltage feedback through the use
of R3 to help keep drain current
constant. Resistor R5 (approximately 10 kΩ) is added to limit
the gate current of enhancement
mode devices such as the
ATF-55143. This is especially
important when the device is
driven to P1dB or PSAT.
Resistor R3 is calculated based
on desired Vds , Ids and available
power supply voltage.
R3 =
VDD – Vds
Ids + IBB
(1)
p
VDD is the power supply voltage.
Vds is the device drain to source
voltage.
Ids is the desired drain current.
IBB is the current flowing through
the R1/R2 resistor voltage
divider network.
The values of resistors R1 and R2
are calculated with the following
formulas
C4
C1
INPUT
Zo
L1
Vgs
IBB
R5
(2)
L3
C2
R1 =
C5
R4
p
IBB
C3
R6
R2 =
(Vds – Vgs) R1
Vgs
(3)
Example Circuit
VDD = 3V
Vds = 2.7V
Ids = 10 mA
Vgs = 0.47V
Choose IBB to be at least 10X the
normal expected gate leakage
current. IBB was conservatively
chosen to be 0.5 mA for this
example. Using equations (1), (2),
and (3) the resistors are calculated as follows
R1 = 940Ω
R2 = 4460 Ω
R3 = 28.6 Ω
Active Biasing
Active biasing provides a means
of keeping the quiescent bias
point constant over temperature
and constant over lot to lot
variations in de vice dc performance. The advantage of the
active biasing of an enhancement
mode PHEMT versus a depletion
mode PHEMT is that a negative
power source is not required. The
techniques of active biasing an
enhancement mode device are
very similar to those used to bias
a bipolar junction transistor.
C7
Vdd
R7
R3
R2
R1
Figure 2. Typical ATF-55143 LNA with
ActiveBiasing.
An active bias scheme is shown
in Figure 2. R1 and R2 provide a
constant voltage source at the
base of a PNP transistor at Q2.
The constant voltage at the base
of Q2 is raised by 0.7 volts at the
emitter. The constant emitter
voltage plus the regulated VDD
supply are present across resistor R3. Constant voltage across
R3 provides a constant current
supply for the drain current.
Resistors R1 and R2 are used to
set the desired Vds. The combined series value of these
resistors also sets the amount of
extra current consumed by the
bias network. The equations that
describe the circuit’s operation
are as follows.
VE = Vds + (Ids • R4)
(1)
VDD – VE
Ids
(2)
R3 =
p
VB = VE – VBE
(3)
R1
V
R1 + R2 DD
(4)
VDD = IBB (R1 + R2)
(5)
VB =
p
Rearranging equation (4)
provides the following formula
R2 =
VDD
V – VB
1 + DD
VB
(
9
)
(5A)
p
C6
Q2
p
and rearranging equation (5)
provides the following formula
L4
L2
R1 =
OUTPUT
Q1
Zo
R1 (VDD – VB)
VB
15
(4A)
p
Example Circuit
VDD = 3V
IBB = 0.5 mA
Vds = 2.7V
Ids = 10 mA
R4 = 10Ω
V BE = 0.7V
Equation (1) calculates the
required voltage at the emitter of
the PNP transistor based on
desired Vds and Ids through
resistor R4 to be 2.8V. Equation
(2) calculates the value of resistor R3 which determines the
drain current Ids. In the example
R3 =20Ω. Equation (3) calculates
the voltage required at the
junction of resistors R1 and R2.
This voltage plus the step-up of
the base emitter junction determines the regulated Vds . Equations (4) and (5) are solved
simultaneously to determine the
value of resistors R1 and R2. In
the example R1=4200 Ω and
R2 =180 0Ω. R7 is chosen to be
1kΩ. This resistor keeps a small
amount of current flowing
through Q2 to help maint ain bias
stability. R6 is chosen to be
10kΩ. This value of resistance is
necessary to limit Q1 gate
current in the presence of high
RF drive levels (especially when
Q1 is driven to the P1dB gain
compression point). C7 provides
a low frequency bypass to keep
noise from Q2 effecting the
operation of Q1. C7 is typically
0.1 µF.
ATF-55143 Die Model
Advanced_Curtice2_Model
MESFETM1
NFET=yes
Rf=
PFET=no
Gscap=2
Vto=0.3
Cgs=0.6193 pF
Beta=0.444
Cgd=0.1435 pF
Lambda=72e-3
Gdcap=2
Alpha=13
Fc=0.65
Tau=
Rgd=0.5 Ohm
Tnom=16.85
Rd=2.025 Ohm
Idstc=
Rg=1.7 Ohm
Ucrit=-0.72
Vgexp=1.91
Rs=0.675 Ohm
Gamds=1e-4
Ld=
Vtotc=
Lg=0.094 nH
Betatce=
Ls=
Rgs=0.5 Ohm
Cds=0.100 pF
Rc=390 Ohm
Crf=0.1 F
Gsfwd=
Gsrev=
Gdfwd=
Gdrev=
R1=
R2=
Vbi=0.95
Vbr=
Vjr=
Is=
Ir=
Imax=
Xti=
Eg=
N=
Fnc=1 MHz
R=0.08
P=0.2
C=0.1
Taumdl=no
wVgfwd=
wBvgs=
wBvgd=
wBvds=
wldsmax=
wPmax=
AllParams=
ATF-55143 ADS Package Model
INSIDE Package
Var VAR
Egn VAR1
K=5
Z2=85
Z1=30
C
C1
C=0.143 pF
GATE
Port
G
Num=1
TLINP
TL4
Z=Z1 Ohm
L=15 mil
K=1
TLINP
TL3
Z=Z2 Ohm
L=25 mil
K=K
TLINP
TL2
Z=Z2/2 Ohm
L=20 0 mil
K=K
TLINP
TL1
Z=Z2/2 Ohm
L=20 0 mil
K=K
L
L6
L=0.205 nH
R=0.001
L
L1
L=0.621 nH
R=0.001
SOURCE
Port
S1
Num=2
TLINP
TL10
Z=Z1 Ohm
L=15 mil
K=1
TLINP
TL9
Z=Z2 Ohm
L=10.0 mil
K=K
C
C2
C=0.115 pF
GaAsFET
FET1
Mode1=MESFETM1
Mode=Nonlinear
L
L4
L=0.238 nH
R=0.001
TLINP
TL7
Z=Z2/2 Ohm
L=5.0 mil
K=K
MSub
L
L7
L=0.778 nH
R=0.001
MSUB
MSub1
H=25.0 mil
Er=9.6
Mur=1
Cond=1.0E+50
Hu=3.9e+034 mil
T=0.15 mil
TanD=0
Rough=0 mil
16
TLINP
TL5
Z=Z2 Ohm
L=26.0 mil
K=K
TLINP
TL8
Z=Z1 Ohm
L=15.0 mil
K=1
SOURCE
Port
S2
Num=4
DRAIN
TLINP
TL6
Z=Z1 Ohm
L=15.0 mil
K=1
Port
D
Num=3
Designing with S and Noise
Parameters and the Non-Linear Model
The non-linear model describing
the ATF-55143 includes both the
die and associat ed package
model. The package model
includes the effect of the pins but
does not include the ef fect of the
additional source inductance
associated with grounding the
source leads through the printed
circuit board. The device S and
Noise Parameters do include the
effect of 0.020 inch thickness
printed circuit board vias. When
comparing simulation results
between the measured S param-
VIA2
V1
D=20.0 mil
H=25.0 mil
T=0.15 mil
Rho=1.0
W=40.0 mil
For Further Information
The information presented here is
an introduction to the use of the
ATF-55143 enhancement mode
PHEMT. More detailed application
circuit information is a vailable
from Agilent Technologies.
Consult the web page or your
local Agilent Technologies sales
represent ative.
DRAIN
SOURCE
VIA2
V3
D=20.0 mil
H=25.0 mil
T=0.15 mil
Rho=1.0
W=40.0 mil
ATF-55143
SOURCE
VIA2
V2
D=20.0 mil
H=25.0 mil
T=0.15 mil
Rho=1.0
W=40.0 mil
eters and the simulated nonlinear model, be sure to include
the effect of the printed circuit
board to get an accurate comparison. This is shown schematically
in Figure 3.
GATE
VIA2
V4
D=20.0 mil
H=25.0 mil
T=0.15 mil
Rho=1.0
W=40.0 mil
MSub
MSUB
MSub1
H=25.0 mil
Er=9.6
Mur=1
Cond=1.0E+50
Hu=3.9e+034 mil
T=0.15 mil
TanD=0
Rough=0 mil
Figure 3. Adding Vias to the ATF-55143 Non-Linear Model for Comparison to Measured S and Noise Parameters.
17
Noise Parameter Applications
Information
Fmin values at 2 GHz and higher
are based on measurements
while t he Fmins below 2 GHz ha ve
been extrapolated. The Fmin
values are based on a set of
16 noise f igure measurements
made at 16 different impedances
using an ATN NP5 test system.
From these measurements, a true
Fmin is calculated. Fmin represents the true minimum noise
figure of the device when the
device is presented wit h an
impedance matching network
that transforms the source
impedance, typically 50Ω, to an
impedance represented by the
reflection coefficient Γo. The
designer must design a matching
network that will present Γo to
the device with minimal associated circuit losses. The noise
figure of the completed amplifier
is equal to the noise f igure of the
device plus the losses of the
matching netw ork preceding the
device. The noise figure of the
device is equal to Fmin only when
the device is presented with Γo. If
the ref lection coefficient of the
matching network is other than
Γo, then the noise figure of the
device will be g reater than Fmin
based on t he following equation.
|Γs – Γo | 2
NF = Fmin + 4 Rn
Zo (|1 + Γo| 2) (1 - |Γs| 2)
Where Rn /Zo is the normalized
noise resistance, Γo is the optimum reflection coefficient
required to produce Fmin and Γs is
the reflection coefficient of the
source impedance actually
presented to the device. The
losses of the matching networks
are non-zero and they will also
add to the noise figure of the
device creating a higher amplifier
noise figure. The losses of the
matching networks are related to
the Q of the components and
associated printed circuit board
loss. Γo is typically fairly low at
higher frequencies and increases
as frequency is lowered. Larger
gate width devices will typically
have a lower Γo as compared to
narrower gate width devices.
18
Typically for FETs, the higher Γo
usually infers that an impedance
much higher than 50Ω is required
for the device to produce Fmin. At
VHF frequencies and even lower
L Band frequencies, the required
impedance can be in the vicinity
of several thousand ohms. Matching to such a high impedance
requires very hi-Q components in
order to minimize circuit losses.
As an example at 900 MHz, when
airwound coils (Q > 100) are used
for matching networks, the loss
can still be up to 0.25 dB which
will add directly to the noise
figure of the device. Using multilayer molded inductors with Qs in
the 30 to 50 range results in
additional loss over the airwound
coil. Losses as high as 0.5 dB or
greater add to the typical 0.15 dB
Fmin of the device creating an
amplifier noise figure of nearly
0.65 dB. A discussion concerning
calculated and measured circuit
losses and their effect on amplifier noise figure is covered in
Agilent Technologies Application
1085.
Ordering Information
Part Number
No. of Devices
Container
ATF-55143-TR1
3000
7” Reel
ATF-55143-TR2
10000
13” Reel
ATF-55143-BLK
100
antistatic bag
Package Dimensions
Outline 43
SOT-343 (SC70 4-lead)
1.30 (0.051)
BSC
1.30 (.051) REF
2.60 (.102)
E
1.30 (.051)
E1
0.85 (.033)
0.55 (.021) TYP
1.15 (.045) BSC
e
1.15 (.045) REF
D
h
A
b TYP
A1
L
θ
DIMENSIONS
SYMBOL
A
A1
b
C
D
E
e
h
E1
L
θ
MAX.
MIN.
1.00 (0.039)
0.80 (0.031)
0.10 (0.004)
0 (0)
0.35 (0.014)
0.25 (0.010)
0.20 (0.008)
0.10 (0.004)
2.10 (0.083)
1.90 (0.075)
2.20 (0.087)
2.00 (0.079)
0.65 (0.025)
0.55 (0.022)
0.450 TYP (0.018)
1.35 (0.053)
1.15 (0.045)
0.35 (0.014)
0.10 (0.004)
10
0
DIMENSIONS ARE IN MILLIMETERS (INCHES)
19
C TYP
Device Orientation
REEL
TOP VIEW
END VIEW
4 mm
CARRIER
TAPE
8 mm
USER
FEED
DIRECTION
COVER TAPE
Tape Dimensions
For Outline 4T
P
P2
D
P0
E
F
W
C
D1
t1 (CARRIER TAPE THICKNESS)
Tt (COVER TAPE THICKNESS)
K0
8° MAX.
A0
DESCRIPTION
B0
SYMBOL
SIZE (mm)
SIZE (INCHES)
CAVITY
LENGTH
WIDTH
DEPTH
PITCH
BOTTOM HOLE DIAMETER
A0
B0
K0
P
D1
2.24 ± 0.10
2.34 ± 0.10
1.22 ± 0.10
4.00 ± 0.10
1.00 + 0.25
0.088 ± 0.004
0.092 ± 0.004
0.048 ± 0.004
0.157 ± 0.004
0.039 + 0.010
PERFORATION
DIAMETER
PITCH
POSITION
D
P0
E
1.55 ± 0.05
4.00 ± 0.10
1.75 ± 0.10
0.061 ± 0.002
0.157 ± 0.004
0.069 ± 0.004
CARRIER TAPE
WIDTH
THICKNESS
W
t1
8.00 ± 0.30
0.255 ± 0.013
0.315 ± 0.012
0.010 ± 0.0005
COVER TAPE
WIDTH
TAPE THICKNESS
C
Tt
5.4 ± 0.10
0.062 ± 0.001
0.205 ± 0.004
0.0025 ± 0.00004
DISTANCE
CAVITY TO PERFORATION
(WIDTH DIRECTION)
F
3.50 ± 0.05
0.138 ± 0.002
CAVITY TO PERFORATION
(LENGTH DIRECTION)
P2
2.00 ± 0.05
0.079 ± 0.002
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
Obsoletes 5988-3190EN
July 18, 2001
5988-3587EN
5° MAX.
20
当社半導体部品のご使用にあたって
仕様及び仕様書に関して
・本仕様は製品改善および技術改良等により予告なく変更する場合があります。ご使用の際には最
新の仕様を問い合わせの上、用途のご確認をお願いいたします。
・本仕様記載内容を無断で転載または複写することは禁じられております。
・本仕様内でご紹介している応用例(アプリケーション)は当社製品がご使用できる代表的なもの
です。ご使用において第三者の知的財産権などの保証または実施権の許諾に対して問題が発生し
た場合、当社はその責任を負いかねます。
・仕様書はメーカとユーザ間で交わされる製品に関する使用条件や誤使用防止事項を言及するもの
です。仕様書の条件外で保存、使用された場合に動作不良、機械不良が発生しても当社は責任を
負いかねます。ただし、当社は納品後 1 年以内に当社の責任に帰すべき理由で、不良或いは故障
が発生した場合、無償で製品を交換いたします。
・仕様書の製品が製造上および政策上の理由で満足できない場合には変更の権利を当社が有し、そ
の交渉は当社の要求によりすみやかに行われることとさせて頂きます。なお、基本的に変更は3ヶ
月前、廃止は 1 年前にご連絡致しますが、例外もございますので予めご了承ください。
ご使用用途に関して
・当社の製品は、一般的な電子機器(コンピュータ、OA 機器、通信機器、AV 機器、家電製品、ア
ミューズメント機器、計測機器、一般産業機器など)の一部に組み込まれて使用されるものです。
極めて高い信頼性と安全性が要求される用途(輸送機器、航空・宇宙機器、海底中継器、原子力
制御システム、生命維持のための医療機器などの財産・環境もしくは生命に悪影響を及ぼす可能
性を持つ用途)を意図し、設計も製造もされているものではありません。それゆえ、本製品の安
全性、品質および性能に関しては、仕様書(又は、カタログ)に記載してあること以外は明示的
にも黙示的にも一切の保証をするものではありません。
回路設計上のお願い
・当社は品質、信頼性の向上に努力しておりますが、一般的に半導体製品の誤動作や、故障の発生
は避けられません。本製品の使用に附随し、或いはこれに関連する誤動作、故障、寿命により、
他人の生命又は財産に被害や悪影響を及ぼし、或いは本製品を取り付けまたは使用した設備、施
設または機械器具に故障が生じ一般公衆に被害を起こしても、当社はその内容、程度を問わず、
一切の責任を負いかねます。
お客様の責任において、装置の安全設計をお願いいたします。
21
Similar pages