AND226G Standard Bright LED Lamps Weight: 0.15 g Unit: mm AND226G 4.0 3.5 1.95 Special Shape 2mm Flat Top ø 2.0 ø 1.6 • Low power requirement • Special shape • All plastic molded lens • GaP – Green • RoHS Compliant 27 Min Cathode 1 Max 5.0 0.75 Features Optical Characteristics (T = 25°C) Color Part Number 0.5 2.54 2.8 Lens Green Green Diffused 2.0 4.0 Viewing Angle 2θ1/2 (deg) 10 70 1.5 Typ AND226G LED Axial Luminous Test Intensity Condition (mcd) (IF–mA) Min. Typ. Lens Desc. Tolerance: ±0.2 Absolute Maximum Ratings (TA = 25°C) Characteristics Symbol Rating Unit Forward Current IF 25 mA Reverse Voltage VR 5 V PD 105 mW Operating Temperature Power Dissipation TOpr -40 to +85 °C Storage Temperature Range TStg -40 to +85 °C Electro-Optical Characteristics (TA = 25°C) Characteristics Symbol Test Condition Forward Voltage VF IF = 20mA AND226G Typ. Max. 2.2 2.5 Unit V Reverse Current IR VR = 5 V – 10 µA Peak Emission Wavelength λp IF = 20mA 565 – nm Spectral Line Half Width λ IF = 20mA 30 – nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 7/18/07 AND226G Standard Bright LED Lamps IF vs. VF IV vs. TC 50 TA = 25°C 30 Forward Current IF (mA) Relative Luminous Intensity IV 3 2 1 0.5 20 10 5 3 2 0.4 0.3 -20 0 20 40 60 Case Temperature TC (°C) 1 1.7 80 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 IV vs. IF IV vs.TA Relative Luminous Intensity IV Allowable Forward Current IF (mA) 5 40 30 20 10 0 0 20 40 60 80 2 1 0.5 0.2 0.1 1 100 2 5 10 20 50 Forward Current IF (mA) Ambient Temperature TA (°C) Relative Luminous Intensity vs. Wavelength Relative Luminous Intensity 1.0 TA = 25° TA = 25° 0.8 0.6 0.4 0.2 0 520 540 560 580 Wavelength (nm) 600 620 640 660 680 700 720 740 760 780 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 800 7/18/07