MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS LZA Low impedance, Downsized, 105℃ Upgrade! Series LZA ・Adoption of innovative electrolyte and new technologies ・Very low impedance at high frequency ・Endurance with ripple current: 4,000 to 7,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant Lower Z Downsized LXZ P158 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) -55 to +105℃ 6.3 to 35Vdc ±20% (M) I=0.01CV or 3µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 6.3V 10V 16V 25V 35V tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. 6.3V 10V 16V 25V 35V Rated voltage (Vdc) 3 3 3 4 3 Z(-55℃)/Z(+20℃) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃. Time φ10 : 4,000hours φ12.5 : 5,000hours φ16 to φ18 : 7,000hours 16 to 35Vdc 6.3 to 10Vdc(φ12.5 to φ18) Rated voltage 6.3 to 10Vdc(φ10) ≦±20% of the initial value ≦±20% of the initial value Capacitance change ≦±30% of the initial value D.F.(tanδ) ≦300% of the initial specified value ≦200% of the initial specified value ≦200% of the initial specified value ≦The initial specified value ≦The initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. 16 to 35Vdc 6.3 to 10Vdc(φ12.5 to φ18) Rated voltage 6.3 to 10Vdc(φ10) ≦±20% of the initial value ≦±20% of the initial value Capacitance change ≦±30% of the initial value D.F.(tanδ) ≦300% of the initial specified value ≦200% of the initial specified value ≦200% of the initial specified value ≦The initial specified value ≦The initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] Code : E F±0.5 φd Sleeve (PET : Dark blue) F±0.5 ●Terminal φD φD' φd F φD' L' 15min. 4min. (φ10) (φ12.5 to φ18) L' 10 0.6 5.0 16 12.5 0.8 0.6 7.5 5.0 φD+0.5max. L+1.5max. 18 0.8 7.5 Gas escape end seal Vent ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L ZA AAA E AA AAA M AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 680µF:681, 2,200µF:222) Lead forming·taping code Terminal code Voltage code (ex. 6.3V:6R3, 25V:250) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 156 CAT. No. E1001N MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Low impedance, Downsized, 105℃ LZASeries Upgrade! ◆STANDARD RATINGS WV (Vdc) Impedance Cap Case size (Ωmax/20℃, (µF) φ D×L(mm) 100kHz) 1,500 1,800 2,700 3,300 4,700 6.3 6,800 6,800 8,200 10,000 12,000 1,000 1,500 2,200 2,700 3,300 10 4,700 4,700 6,800 6,800 8,200 820 1,000 16 1,500 1,800 2,200 10×12.5 10×16 10×20 10×25 12.5×20 12.5×25 16×20 18×20 16×25 18×25 10×12.5 10×16 10×20 10×25 12.5×20 12.5×25 16×20 16×25 18×20 18×25 10×12.5 10×16 10×20 10×25 12.5×20 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.019 0.025 0.018 0.063 0.049 0.035 0.033 0.029 Rated ripple current (mArms/ 105℃ ,100kHz) 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,760 2,640 2,850 960 1,240 1,550 1,740 1,890 WV Part No. (Vdc) ELZA6R3E □□ 152MJC5S ELZA6R3E □□ 182MJ16S ELZA6R3E □□ 272MJ20S ELZA6R3E □□ 332MJ25S ELZA6R3E □□ 472MK20S ELZA6R3E □□ 682MK25S ELZA6R3E □□ 682ML20S ELZA6R3E □□ 822MM20S ELZA6R3E □□ 103ML25S ELZA6R3E □□ 123MM25S ELZA100E □□ 102MJC5S ELZA100E □□ 152MJ16S ELZA100E □□ 222MJ20S ELZA100E □□ 272MJ25S ELZA100E □□ 332MK20S ELZA100E □□ 472MK25S ELZA100E □□ 472ML20S ELZA100E □□ 682ML25S ELZA100E□□682MM20S ELZA100E□□822MM25S ELZA160E □□ 821MJC5S ELZA160E □□ 102MJ16S ELZA160E □□ 152MJ20S ELZA160E □□ 182MJ25S ELZA160E □□ 222MK20S 16 25 35 Impedance Cap Case size (Ωmax/20℃, (µF) φ D×L(mm) 100kHz) 3,300 3,900 5,600 5,600 8,200 470 680 1,000 1,200 1,500 2,200 2,700 3,300 3,900 4,700 330 470 680 820 1,000 1,500 1,800 2,200 2,700 3,300 12.5×25 16×20 16×25 18×20 18×25 10×12.5 10×16 10×20 10×25 12.5×20 12.5×25 16×20 18×20 16×25 18×25 10×12.5 10×16 10×20 10×25 12.5×20 12.5×25 16×20 18×20 16×25 18×25 0.022 0.026 0.019 0.025 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 0.063 0.049 0.035 0.033 0.029 0.022 0.026 0.025 0.019 0.018 Rated ripple current (mArms/ 105℃ ,100kHz) 2,350 2,330 2,760 2,640 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 960 1,240 1,550 1,740 1,890 2,350 2,330 2,640 2,760 2,850 Part No. ELZA160E □□ 332MK25S ELZA160E □□ 392ML20S ELZA160E □□ 562ML25S ELZA160E□□562MM20S ELZA160E□□822MM25S ELZA250E □□ 471MJC5S ELZA250E □□ 681MJ16S ELZA250E □□ 102MJ20S ELZA250E □□ 122MJ25S ELZA250E □□ 152MK20S ELZA250E □□ 222MK25S ELZA250E □□ 272ML20S ELZA250E□□332MM20S ELZA250E □□ 392ML25S ELZA250E□□472MM25S ELZA350E □□ 331MJC5S ELZA350E □□ 471MJ16S ELZA350E □□ 681MJ20S ELZA350E □□ 821MJ25S ELZA350E □□ 102MK20S ELZA350E □□ 152MK25S ELZA350E □□ 182ML20S ELZA350E□□222MM20S ELZA350E □□ 272ML25S ELZA350E□□332MM25S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ●Frequency Capacitance (µF) Multipliers Frequency (Hz) 330 to 470 680 to 1,800 2,200 to 3,900 4,700 to 12,000 120 0.50 0.60 0.75 0.85 1k 0.85 0.87 0.90 0.95 10k 0.94 0.95 0.95 0.98 100k 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 157 CAT. No. E1001N