3A Fixed Low Dropout Linear Regulator (LDO) NIKO-SEM L1085-3.3 TO-252,263,220 GENERAL DESCRIPTION FEATURES The L1085 is a positive and low dropout three-terminal voltage regulator with 3A output current capability. This device is designed for use in low voltage applications that offers lower dropout voltage and faster transient response. z Very easy to use, it requires only two external resistors to set the output voltage z Low dropout voltage: 1.3V typical at up to 3A z Low ground current z Fast transient response z Current & thermal limiting z Line regulation: 0.5% typical z Load regulation: 0.5% typical z TO-263, TO-220 and TO-252 packages This device is fully protected against over current faults, over temperature operation, reversed input polarity, reversed lead insertion, transient voltage spike …etc. On-Chips trimming the reference voltage to 1% and features the low dropout of maximum 1.50 volts. APPLICATIONS z High current microprocessor supplies z Low voltage logic supply z Powering VGA & sound card z Portable instrumentation z Constant current regulator z Post regulator for switching power supply The L1085 Series regulators are available in the popular industry standard TO-263 TO-220 and TO-252 packages. TYPICAL APPLICATION Vin>4.75V IN OUT Vout=3.3V L1085-3.3 Cin Cout GND RL 10uF 10uF Basic Fixed Output Regulator Circuit 1 JUL-05-2001 3A Fixed Low Dropout Linear Regulator (LDO) NIKO-SEM L1085-3.3 TO-252,263,220 ABSOLUTE MAXIMUM RATINGS z Maximum Supply Voltage z Operating Junction Temperature Range z Storage Temperature Range z Lead Temperature (Soldering, 10 Seconds) 7V Internally Limited z Power Dissipation z Thermal Resistance Junction to Case, θJC z Thermal Resistance Junction to Ambient, θJA TO-263 TO-252 TO-220 5 °C/W 0 to 125 °C -40 to 150 °C 260 °C 60 °C/W 70 °C/W 50 °C/W ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA = 25 °C.) Parameter Symbol Output Voltage (Fixed Version) Dropout Voltage Line Regulation Load Regulation Vo Minimum Load Current Typical VIN = 5V, IOUT = 10mA 3.3V VD ΔVREF = 1%, IOUT = 3A REG(LINE) (VOUT + 1.5V) ≤ VIN ≤ 7V, IOUT = 10mA REG(LOAD) (VIN -VOUT) = 3V, 10mA ≤ IOUT ≤ 3A 1.3V 0.5% 0.5% 1.5V ≤ (VIN -VOUT) ≤ 5.75V 10mA IO GND Pin Current Current Limit Test Conditions IGND ICL RMS Output Noise VN Ripple Rejection Ratio RA VIN - VOUT = 2V f = 120Hz, CADJ = 22µF for ADJ pin, VIN = 5V, IOUT = 3A Limits 3.234VMin 3.367VMax 1.50V 2% 2.5% 55µA 5.0A 0.003% of VOUT 100µA 4.0A (Min) 72dB 60dB (Min) DEVICE SELECTION GUIDE Device L1085D-3.3 Package TO-252 Marking L1085-33 L1085S-3.3 L1085S3-3.3 TO-263 (2-Lead) TO-263 (3-Lead) L1085-33 L1085-33 2 L1085T-3.3 L1085S5-3.3 TO-220 TO-263 (5-Lead) L1085-33 L1085-33 JUL-05-2001 NIKO-SEM 3A Fixed Low Dropout Linear Regulator (LDO) L1085-3.3 TO-252,263,220 PIN CONFIGURATIONS Pin # Function 1 GND 2 Output 3 Input Note: TAB is Output Pin Pin # Function 2 GND 3 Output 5 Input Note: TAB is Output Pin (For 5-pin) 3 JUL-05-2001 3A Fixed Low Dropout Linear Regulator (LDO) NIKO-SEM L1085-3.3 TO-252,263,220 TO-263 (D2PAK) MECHANICAL DATA mm Dimension mm Min. Typ. Max. A 14.5 15 15.8 B 4.2 C 1.20 D Dimension Min. Typ. Max. H 1.0 1.5 1.8 4.7 I 9.8 1.35 J 6.5 K 1.5 2.8 E 0.3 F -0.102 G 8.5 0.4 9 0.5 L 0.7 0.203 M 4.83 9.5 N 4 10.3 1.4 5.08 5.33 JUL-05-2001 3A Fixed Low Dropout Linear Regulator (LDO) NIKO-SEM L1085-3.3 TO-252,263,220 TO-263 (D2PAK) MECHANICAL DATA mm Dimension mm Min. Typ. Max. A 14.5 15 15.8 B 4.2 C 1.20 D Dimension Min. Typ. Max. H 1.0 1.5 1.8 4.7 I 9.8 1.35 J 6.5 K 1.5 2.8 E 0.3 F -0.102 G 8.5 0.4 9 0.5 L 0.7 0.203 M 4.83 9.5 N 5 10.3 1.4 5.08 5.33 JUL-05-2001 3A Fixed Low Dropout Linear Regulator (LDO) NIKO-SEM L1085-3.3 TO-252,263,220 TO-220 (3-Lead) MECHANICAL DATA mm Dimension mm Min. Typ. Max. A 9.78 10.16 10.54 B 2.61 2.74 2.87 C Dimension 20 Min. Typ. Max. H 2.4 2.54 2.68 I 1.19 1.27 1.35 J 4.4 4.6 4.8 D 28.5 28.9 29.3 K 1.14 1.27 1.4 E 14.6 15.0 15.4 L 2.3 2.6 2.9 F 8.4 8.8 9.2 M 0.26 0.46 0.66 G 0.72 0.8 0.88 N 6 7° JUL-05-2001 3A Fixed Low Dropout Linear Regulator (LDO) NIKO-SEM L1085-3.3 TO-252,263,220 TO-263 (D2PAK, 5-Lead) MECHANICAL DATA mm Dimension mm Min. Typ. Max. A 14.5 15 15.8 B 4.2 C 1.20 D Dimension Min. Typ. Max. H 1.0 1.5 1.8 4.7 I 9.8 1.35 J 6.5 K 1.5 2.8 E 0.3 F -0.102 G 8.5 0.4 9 10.3 0.5 L 0.7 0.85 1.0 0.203 M 1.57 1.7 1.83 9.5 N 7 JUL-05-2001 3A Fixed Low Dropout Linear Regulator (LDO) NIKO-SEM L1085-3.3 TO-252,263,220 TO-252 (DPAK) MECHANICAL DATA mm Dimension Min. Typ. mm Dimension Max. Min. Typ. Max. A 9.35 10.1 H B 2.2 2.4 I 6.4 6.6 C 0.48 0.6 J 5.2 5.4 D 0.89 1.5 K 0.6 1 E 0.45 0.6 L 0.64 0.9 F 0.03 0.23 M 4.4 4.6 G 6 6.2 N 8 0.8 JUL-05-2001