New Product AU2PK, AU2PM Vishay General Semiconductor Ultrafast Avalanche Surface Mount Rectifiers FEATURES eSMP ® Series • Very low profile - typical height of 1.1 mm • Ideal for automated placement K • Glass passivated chip junction • Fast reverse recovery time 1 • Controlled avalanche characteristics • Low leakage current 2 • High forward surge capability TO-277A (SMPC) K Cathode • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C Anode 1 • AEC-Q101 qualified Anode 2 • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 800 V, 1000 V IFSM 30 A trr 75 ns EAS 20 mJ VF at IF = 2.0 A 1.42 V TJ max. 175 °C TYPICAL APPLICATIONS For use in lighting, fast switching rectification of power supplies, inverters, converters, and freewheeling diodes for consumer, automotive, and telecommunication. • Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage VRRM Maximum DC forward current (fig. 1) Non-repetitive avalance energy at TJ = 25 °C IAS = 2.5 A max. IAS = 1.0 A typ. Operating junction and storage temperature range AU2PM AU2K AU2M 800 1000 IF (1) 2.0 (2) 1.3 IFSM 30 IF Peak forward surge current 10 ms single half sine-wave superimposed on rated load AU2PK UNIT V A A 20 EAS TJ, TSTG mJ 30 - 55 to + 175 °C Notes (1) Mounted on 10 mm x 10 mm pad areas, 1 oz. FR4 PCB (2) Free air, mounted on recommended pad area Document Number: 89337 Revision: 04-May-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product AU2PK, AU2PM Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 2.0 A Instantaneous forward voltage Reverse current Rated VR TA = 25 °C TA = 125 °C TA = 25 °C TA = 125 °C SYMBOL VF (1) TYP. MAX. 2.1 2.5 1.42 2.0 0.27 10 62 500 UNIT V IR (2) μA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 75 ns Typical junction capacitance per diode Rated VR = 4.0 V, 1 MHz CJ 29 - pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance AU2PK AU2PM RJA (1) 85 RJM (2) 5 UNIT °C/W Notes (1) Free air, mounted on recommended PCB 1 oz. pad are; thermal resistance R JA - junction to ambient (2) Units mounted on PCB with 10 mm x 10 mm copper pad areas; R JM - junction to mount ORDERING INFORMATION (Example) PREFERRED P/N AU2PM-M3/86A AU2PM-M3/87A UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.10 86A 1500 7" diameter plastic tape and reel 0.10 87A 6500 13" diameter plastic tape and reel AU2PMHM3/86A (1) 0.10 86A 1500 7" diameter plastic tape and reel AU2PMHM3/86A (1) 0.10 87A 6500 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 89337 [email protected], [email protected], [email protected] Revision: 04-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product AU2PK, AU2PM Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1000 2.2 Instantaneous Reverse Current (μA) 2.4 TM = 159 °C DC Forward Current (A) 2.0 1.8 1.6 TA = 25 °C 1.4 1.2 1.0 0.8 0.6 0.4 TM Measured at the Cathode Band Terminal 0.2 TA = 175 °C 100 TA = 125 °C 10 TA = 75 °C 1 0.1 TA = 25 °C 0.01 0 0 25 50 75 100 125 150 175 10 20 30 40 50 60 70 100 Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics 100 D = 0.5 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 D = 0.3 D = 0.2 3.0 D = 0.1 2.5 D = 1.0 2.0 T 1.5 1.0 D = tp/T 0.5 Junction Capacitance (pF) 3.5 Average Power Loss (W) 90 Percent of Rated Peak Reverse Voltage (%) 4.0 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.1 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Average Power Loss Characteristics Fig. 5 - Typical Junction Capacitance 100 TA = 175 °C TA = 125 °C TA = 75 °C 1 TA = 25 °C 0.1 0.2 0.6 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8 4.2 4.6 5.0 Transient Thermal Impedance (°C/W) 100 10 10 tp 0 Instantaneous Forward Current (A) 80 Ambient Temperature (°C) Junction-to-Ambient 10 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Document Number: 89337 Revision: 04-May-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product AU2PK, AU2PM Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) K 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC TO-277A www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number: 89337 [email protected], [email protected], [email protected] Revision: 04-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1