SMD EAST1010RGBA7 Features Package in 8mm tape on 7〞diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow Solder process Full-color type Pb-free Component solderable surface finish is Gold The Product itself will remain whithn RoHS compliant version Compliance with EU REACH Compliance Halogen Free.(Br<900ppm,Cl<900ppm,Br+Cl<1500ppm) Description The SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Moreover, with its black PCB, the possess an ideal solution for high-contract and high-resolution indoor signage display. Applications 1 Indoor signage display applications Indoor decorating and entertainment design Flat backlight for LCD, switch and symbol Indicator and backlighting for all consumer electronics Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Device Selection Guide Chip Materials Emitted Color AlGaInP Brilliant Red InGaN Brilliant Green InGaN Brilliant Blue Resin Color Black Surface Diffused Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) IFP Power Dissipation Pd Junction Temperature Operating Temperature Storage Temperature ESD (Classification acc. AEC Q101) Tj Topr Tstg ESDHBM R:2000 G:1000 B:1000 Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. 2 Rating R6:10 GA:10 BD:10 R6:20 GA:20 BD:20 R6:24 GA:31 BD:31 100 -40 ~ +85 -40 ~ +90 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Unit mA mA mW ℃ ℃ ℃ V Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Iv Min. R6 GA BD 2θ1/2 Viewing Angle Λp Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Λd Δλ Forward Voltage VF Reverse Current4 IR 18.4 61.0 8.8 ----- R6 GA ----BD R6 619.0 GA 523.0 BD 463.0 R6 GA ----BD 1.7 R6 2.5 GA 2.5 BD ----- Typ. Max. ------------120 625 525 465 35.5 104.0 25.4 ----- ----- Unit Condition mcd IF=5mA deg IF=5mA ----- nm IF=5mA 629.0 530.0 470.0 nm IF=5mA ----- nm IF=5mA V IF=5mA μA VR=5V 20 25 25 2.0 2.9 2.9 ----- 2.4 3.2 3.2 10 Note: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 4. Only for Electronic test 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Floating Bin(R6) Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition RA RB RC RD 18.4 21.0 24.0 27.3 24.0 27.3 31.0 35.5 mcd IF =5mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition R2 R3 619.0 624.0 624.0 629.0 nm IF =5mA Bin Range of Dominant Voltage Bin Code Min. Max. Unit Condition R1 1.7 2.4 v IF =5mA Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Floating Bin(GA) Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition GC GE 61.0 80.0 80.0 104.0 mcd IF =5mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition G2 G3 G4 523.0 525.0 527.0 526.0 528.0 530.0 nm IF =5mA Bin Range of Dominant Voltage Bin Code Min. Max. Unit Condition G1 2.5 3.2 v IF =5mA Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Floating Bin(BD) Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition BA BC BE BG 8.8 11.5 15.0 19.5 11.5 15.0 19.5 25.4 mcd IF =5mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition B2 B3 B4 463.0 465.0 467.0 466.0 468.0 470.0 nm IF =5mA Bin Range of Dominant Voltage Bin Code Min. Max. Unit Condition B1 2.5 3.2 v IF =5mA Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Typical Electro-Optical Characteristics Curves Relative luminous intensity (%) Spectrum Distribution Radiation Diagram Ta=25°C 100 0° 10° Ta=25°C 20° 30° RED GREEN BLUE 75 40° 1.0 50 0.9 50° 0.8 60° 25 70° 80° 90° 0.7 0 400 450 500 550 650 600 0.5 0.3 700 0.1 0.2 0.4 0.6 Wavelength λ (nm) Forward Current Derating Curve Ta=25°C 5 50 Relative luminous intensity Forward Current IF (mA) Forward Current vs. Forward Voltage 40 30 25 20 RED GREEN BLUE 10 0 1.6 2.0 2.4 2.8 3.0 3.4 3.8 4.2 4 3 2 GREEN 1 0 Forward Voltage VF (V) RED Release Date:05/07/2018 60 80 100 Ambient Temperature Ta (°C) Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 40 Ambient Temperature vs. Power Dissipation Ambient Temperature Ta (°C) 7 20 Total Power Dissipation (mW) Total Power Dissipation (mW) GREEN 0 Forward Current I FP (mA) Ambient Temperature vs. Power Dissipation BLUE RED BLUE Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Moisture Resistant Packing Materials Label Explanation ‧PN: Customer’s Product Number ‧SPECIFICATION: LED ‧PO TYPE: the label's function ‧LOT No: Lot Number ‧QTY: Packing Quantity ‧VENDOR P/N: express the product type ‧VENDOR/Code: EVERLIGHT'code Reel Dimensions 9 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Carrier Tape Dimensions: The minimum quantity of packing is 10000 pcs per reel. Note: Tolerances unless mentioned ±0.1mm. Unit = mm Moisture Resistant Packing Process Label Aluminum moistue-proof bag Desiccant Label Note: Tolerances unless mentioned ±0.1mm. Unit = mm 10 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 168Hrs under 30℃ or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 2.5 Before using LEDs, baking treatment should be implemented based on the following conditions: pre-curing at 60±5℃ for 24 hours or 125±5℃ for 3 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 11 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6.Directions for use The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, It may cause migration resulting in LED damage. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight Americas before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 12 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com DATASHEET SMD EAST1010RGBA7 DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT’s prior consent. 6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 13 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : May.03.2018. Ver.:1 Release Date:05/07/2018 Issue No: DSE-0020255-v1 狀態:Developing(開發階段) www.everlightamericas.com