AZ830P POLARIZED DIP RELAY BISTABLE (LATCHING) FEATURES • • • • • • • • • High sensitivity, 86 mW pickup Low profile DIP package Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric Epoxy sealed for automatic wave soldering and cleaning DC coils to 48 VDC High switching capacity, 60 W, 125 VA Fits standard 16 pin IC socket UL file E43203 GENERAL DATA Life Expectancy Mechanical CONTACTS Electrical Arrangement DPDT (2 Form C) Bifurcated crossbar contacts Ratings Resistive load: Max. switched power: 60 W or 125 VA Max. switched current: 2 A Max. switched voltage: 150 VDC or 300 VAC Rated Load UL 2 A at 30 VDC 1 A at 120 VAC Material Silver alloy, gold clad. Resistance < 50 milliohms initially 3 ms at nominal coil voltage Reset Time (typical) 3.5 ms at nominal coil voltage Capacitance Contact to contact: 1.0 pF Contact set to contact: 1.0 pF Contact to coil: 2.0 pF Bounce (typical) At 10 mA contact current 1.5 ms at operate N.O. side 2.5 ms at operate N.C. side Dielectric Strength (at sea level) 1500 Vrms contact to coil 1000 Vrms between contact sets 1000 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 V dielectric Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Ambient Temperature Operating At nominal coil voltage Standard: -40°C (-40°F) to 85°C (185°F) Sensitive: -40°C (-40°F) to 95°C (203°F) Ultra-Sensitive: 40°C (-40°F) to 100°C (212°F) All: -40°C (-40°F) to 115°C (239°F) Power Max. Continuous Dissipation Temperature Rise Temperature Standard coil: 176 mW Sensitive coil: 90 mW Ultra-Sensitive coil: 86 mW 1.2 W at 20°C (68°F) ambient 0.9 W at 40°C (104°F) ambient Standard: 38°C (68°F) at nominal coil voltage Sensitive: 21°C (38°F) at nominal coil voltage Ultra-Sensitive: 16°C (29°F) at nominal coil voltage Max. 115°C (239°F) NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. Relay adjustment may be affected if undue pressure is exerted on relay case. 5. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 6. Specifications subject to change without notice. 1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC 2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC Set Time (typical) COIL (Polarized) At Pickup Voltage (typical) Minimum operations 1 x 108 Storage Vibration 0.062" DA at 10–55 Hz Shock 40 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams 7/17/07W AZ830P RELAY ORDERING DATA COIL SPECIFICATIONS STANDARD COIL Nominal Max. Coil Coil Continuous Resistance VDC VDC ± 10% 3 4.5 25 5 7.5 Set Reset VDC 2.1 69.4 ORDER NUMBER* Maximum Switching Capacity AZ830P2–2C–3DE 3.5 AZ830P2–2C–5DE 10.0 9.0 8.0 7.0 6.0 5.0 4.0 6 9.0 100 4.2 AZ830P2–2C–6DE 9 13.5 225 6.3 AZ830P2–2C–9DE 12 18.0 400 8.4 AZ830P2–2C–12DE 24 36.0 1600 16.8 AZ830P2–2C–24DE 48 72.0 6400 33.6 AZ830P2–2C–48DE 3.0 Current 2.0 SENSITIVE COIL AC Resistive Load 1.0 .9 .8 .7 .6 .5 3 6.4 50 2.1 AZ830P2–2C–3DSE 5 10.6 139 3.5 AZ830P2–2C–5DSE .3 6 12.7 200 4.2 AZ830P2–2C–6DSE .2 9 19.1 450 6.3 AZ830P2–2C–9DSE 12 25.5 800 8.4 AZ830P2–2C–12DSE 24 50.9 3200 16.8 AZ830P2–2C–24DSE DC Resistive Load 1000 400 500 600 700 800 900 300 200 100 50 60 70 80 90 40 30 20 .1 10 .4 Voltage ULTRA-SENSITIVE COIL 3 7.3 2.4 AZ830P2–2C–3DSSE 5 12.3 185 66.7 4.0 AZ830P2–2C–5DSSE 6 14.7 267 4.8 AZ830P2–2C–6DSSE 9 22.0 600 7.2 AZ830P2–2C–9DSSE 12 29.4 1067 9.6 AZ830P2–2C–12DSSE 24 58.8 4267 19.2 AZ830P2–2C–24DSSE * Add suffix “R” to indicate reversed polarity. MECHANICAL DATA PC BOARD LAYOUT .788 (20.0) .390 (9.9) .386 .366 (9.8) (9.3) .044 (1.1) .100 (2.54) .200 (5.07) .200 (5.07) .200 (5.07) 0.03 DIA (0.8) (10 HOLES) .138 (3.5) .044 (1.1) REF .044 (1.1) REF .012 ± .005 (0.3 ± 0.13) TYP (.024 ± .005) (0.6 ± 0.13) TYP 0.1 (2.54) Viewed toward terminals TWO COIL LATCHING WATCH FOR POLARITY 1 2 + – 16 Set WIRING DIAGRAM 4 6 8 13 11 9 + – 15 Diagrams show the “reset” position before energized with polarity as shown Viewed toward terminals Reset Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 7/17/07W