LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS • • • • • • • • Single Supply or Dual Supplies Wide Range of Supply Voltage: – Max Rating . . . 2 V to 36 V – Tested to 30 V . . . Non-V Devices – Tested to 32 V . . . V-Suffix Devices Low Supply-Current Drain Independent of Supply Voltage . . . 0.8 mA Typ Low Input Bias Current . . . 25 nA Typ Low Input Offset Current . . . 3 nA Typ (LM139) Low Input Offset Voltage . . . 2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . ±36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS DESCRIPTION/ORDERING INFORMATION These devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. LM139, LM139A . . . D, J, OR W PACKAGE LM239 . . . D, N, OR PW PACKAGE LM239A . . . D PACKAGE LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE LM2901 . . . D, N, NS, OR PW PACKAGE (TOP VIEW) 1OUT 2OUT VCC 2IN− 2IN+ 1IN− 1IN+ 1 14 2 13 3 12 4 11 5 10 6 7 9 8 OUT3 OUT4 GND 4IN+ 4IN− 3IN+ 3IN− LM139, LM139A . . . FK PACKAGE (TOP VIEW) 2OUT 1OUT NC 3OUT 4OUT FEATURES • • SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 VCC NC 2IN− NC 2IN+ 3 4 5 6 7 8 2 1 20 19 18 17 16 15 14 9 10 11 12 13 GND NC 4IN+ NC 4IN− 1IN− 1IN+ NC 3IN− 3IN+ www.ti.com NC − No internal connection The LM139 and LM139A are characterized for operation over the full military temperature range of –55°C to 125°C. The LM239 and LM239A are characterized for operation from –25°C to 125°C. The LM339 and LM339A are characterized for operation from 0°C to 70°C. The LM2901, LM2901AV, and LM2901V are characterized for operation from –40°C to 125°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1979–2006, Texas Instruments Incorporated On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS www.ti.com SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 ORDERING INFORMATION TA VIOmax AT 25°C PACKAGE (1) MAX VCC PDIP – N 30 V LM339N Tube of 50 LM339D Reel of 2500 LM339DR SOP – NS Reel of 2000 LM339NSR LM339 SSOP – DB Reel of 2000 LM339DBR LM339 Tube of 90 LM339PW Reel of 2000 LM339PWR Tube of 25 LM339AN Tube of 50 LM339AD Reel of 2500 LM339ADR SOP – NS Reel of 2000 LM339ANSR LM339A SSOP – DB Reel of 2000 LM339ADBR L339A Tube of 90 LM339APW Reel of 2000 LM339APWR Tube of 25 LM239N Tube of 50 LM239D Reel of 2500 LM239DR Tube of 90 LM239PW Reel of 2000 LM239PWR Tube of 50 LM239AD Reel of 2500 LM239ADR Tube of 25 LM2901N Tube of 50 LM2901D Reel of 2500 LM2901DR Reel of 2000 LM2901NSR Tube of 90 LM2901PW Reel of 2000 LM2901PWR SOIC – D Reel of 2500 LM2901VQDR L2901V TSSOP – PW Reel of 2000 LM2901VQPWR L2901V SOIC – D Reel of 2500 LM2901AVQDR L2901AV TSSOP – PW Reel of 2000 LM2901AVQPWR L2901AV CFP – W Tube of 25 LM139W LM139W CDIP – J Tube of 25 LM139J LM139J LCCC – FK Tube of 55 LM139FK LM139FK Tube of 50 LM139D Reel of 2500 LM139DR CFP – W Tube of 25 LM139AW LM139AW CDIP – J Tube of 25 LM139AJ LM139AJ LCCC – FK Tube of 55 LM139AFK LM139AFK Tube of 50 LM139AD Reel of 2500 LM139ADR TSSOP – PW 0°C to 70°C PDIP – N SOIC – D 2 mV 30 V TSSOP – PW PDIP – N 5 mV 30 V –25°C to 85°C SOIC – D TSSOP – PW 2 mV 30 V SOIC – D PDIP – N SOIC – D 7 mV 30 V –40°C to 125°C SOP – NS TSSOP – PW 7 mV 2 mV 5 mV 32 V 32 V 30 V SOIC – D –55°C to 125°C 2 mV 30 V SOIC – D (1) 2 TOP-SIDE MARKING Tube of 25 SOIC – D 5 mV ORDERABLE PART NUMBER LM339N LM339 L339 LM339AN LM339A L339A LM239N LM239 L239 LM239A LM2901N LM2901 LM2901 L2901 LM139D LM139AD Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Submit Documentation Feedback LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS www.ti.com SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 SYMBOL (EACH COMPARATOR) IN+ OUT IN− SCHEMATIC (EACH COMPARATOR) VCC 80-µA Current Regulator 10 µA 60 µA 10 µA 80 µA IN+ OUT IN− GND All current values shown are nominal. Submit Documentation Feedback 3 LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS www.ti.com SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX Supply voltage (2) VID Differential input voltage (3) VI Input voltage range (either input) VO Output voltage 36 V IO Output current 20 mA –0.3 36 V ±36 V 36 V Duration of output short circuit to ground (4) θJA θJC TJ Tstg (1) (2) (3) (4) (5) (6) (7) (8) 4 UNIT VCC Package thermal Unlimited impedance (5) (6) Package thermal impedance (7) (8) D package 86 DB package 96 N package 80 NS package 76 PW package 113 FK package 5.61 J package 15.05 W package 14.65 Operating virtual junction temperature °C/W °C/W 150 °C Case temperature for 60 s FK package 260 °C Lead temperature 1,6 mm (1/16 in) from case for 60 s J package 300 °C 150 °C Storage temperature range –65 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values, except differential voltages, are with respect to network ground. Differential voltages are at IN+ with respect to IN–. Short circuits from outputs to VCC can cause excessive heating and eventual destruction. Maximum power dissipation is a function of TJ (max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ (max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Maximum power dissipation is a function of TJ (max), θJC, and TC. The maximum allowable power dissipation at any allowable case temperature is PD = (TJ (max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability. The package thermal impedance is calculated in accordance with MIL-STD-883. Submit Documentation Feedback LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS www.ti.com SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 Electrical Characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) TEST CONDITIONS (1) PARAMETER VIO Input offset voltage VCC = 5 V to 30 V, VIC = VICR min, VO = 1.4 V IIO Input offset current VO = 1.4 V IIB Input bias current VO = 1.4 V VICR Common-mode input-voltage range MIN LM139A TYP MAX 25°C 2 Full range 3 Full range 25°C Full range Large-signal differential-voltage amplification VCC+ = ±7.5 V, VO = –5 V to 5 V IOH High-level output current VID = 1 V –300 0 to VCC – 1.5 0 to VCC – 1.5 0 to VCC – 2 0 to VCC – 2 0.1 VOH = 30 V Full range Low-level output current VID = –1 V, VOL = 1.5 V 25°C ICC Supply current (four comparators) VO = 2.5 V, No load 25°C 50 150 Full range 16 0.1 nA 150 0.8 2 400 700 6 nA V/mV 700 6 nA 200 1 400 mV V 1 25°C IOL 25 –25 –100 25°C IOL = 4 mA 3 –300 VOH = 5 V VID = –1 V, 4 25 UNIT 2 –25 –100 200 Low-level output voltage 1 100 25°C VOL 5 TYP MAX 100 Full range 25°C MIN 9 25°C AVD (1) (2) LM139 TA (2) 16 0.8 µA mV mA 2 mA All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM139 and LM139A is –55°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Switching Characteristics VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS LM139 LM139A UNIT TYP Response time (1) (2) RL connected to 5 V through 5.1 kΩ, CL = 15 pF (1) (2) 100-mV input step with 5-mV overdrive 1.3 TTL-level input step 0.3 µs CL includes probe and jig capacitance. The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. Submit Documentation Feedback 5 LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS www.ti.com SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 Electrical Characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) TEST CONDITIONS (1) PARAMETER LM239 LM339 TA (2) MIN VIO Input offset voltage VCC = 5 V to 30 V, VIC = VICR min, VO = 1.4 V IIO Input offset current VO = 1.4 V IIB Input bias current VO = 1.4 V VICR Common-mode input-voltage range TYP MAX 25°C 2 Full range 5 Full range 25°C VCC = 15 V, VO = 1.4 V to 11.4 V, RL ≥ 15 kΩ to VCC IOH High-level output current VID = 1 V VOL Low-level output voltage VID = –1 V, IOL = 4 mA IOL Low-level output current VID = –1 V, VOL = 1.5 V 25°C ICC Supply current (four comparators) VO = 2.5 V, No load 25°C 25°C VOH = 30 V Full range 3 4 50 5 –25 –250 –25 –250 –400 –400 0 to VCC – 2 0 to VCC – 2 50 50 150 0 to VCC – 1.5 25°C VOH = 5 V 1 0 to VCC – 1.5 Full range Large-signal differential-voltage amplification 5 UNIT TYP MAX 150 Full range 25°C MIN 9 25°C AVD (1) (2) LM239A LM339A 200 0.1 50 50 25°C 150 200 0.1 400 150 700 6 16 0.8 2 nA V/mV 50 nA 1 µA 400 700 6 nA V 1 Full range mV 16 0.8 mV mA 2 mA All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM239/LM239A is –25°C to 85°C, and for LM339/LM339A is 0°C to 70°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Switching Characteristics VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS LM239 LM239A LM339 LM339A UNIT TYP Response time (1) (2) 6 RL connected to 5 V through 5.1 kΩ, CL = 15 pF (1) (2) 100-mV input step with 5-mV overdrive 1.3 TTL-level input step 0.3 CL includes probe and jig capacitance. The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. Submit Documentation Feedback µs LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS www.ti.com SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 Electrical Characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) TEST CONDITIONS (1) PARAMETER VIO Input offset voltage Non-A devices VIC = VICR min, VO = 1.4 V, VCC = 5 V to MAX (3) IIO Input offset current VO = 1.4 V IIB Input bias current VO = 1.4 V VICR Common-mode input-voltage range TA (2) A-suffix devices 25°C 2 7 1 2 Full range 25°C 5 50 200 25°C –25 Full range 25°C Full range IOH High-level output current VID = 1 V Low-level output voltage VID = –1 V, IOL = 4 mA V-suffix devices All devices Full range 25°C 25°C VOH = 5 V VOH = VCC MAX (3) Non-V devices IOL Low-level output current VID = –1 V, VOL = 1.5 V ICC Supply current (four comparators) VO = 2.5 V, No load VCC = 5 V VCC = MAX (3) UNIT mV 4 Full range VCC = 15 V, VO = 1.4 V to 11.4 V, RL ≥ 15 kΩ to VCC (3) MAX 15 25°C Large-signal differential-voltage amplification (1) (2) TYP Full range AVD VOL LM2901 MIN –250 –500 0 to VCC – 1.5 25°C 100 V/mV 0.1 50 nA 1 µA Full range 25°C nA V 0 to VCC – 2 25 nA 150 500 150 400 mV 700 6 25°C 16 mA 0.8 2 1 2.5 mA All characteristics are measured with zero common-mode input voltage, unless otherwise specified. Full range (MIN to MAX) for LM2901 is –40°C to 125°C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. VCC MAX = 30 V for non-V devices, and 32 V for V-suffix devices Switching Characteristics VCC = 5 V, TA = 25°C PARAMETER Response time (1) (2) TEST CONDITIONS RL connected to 5 V through 5.1 kΩ, CL = 15 pF (1) (2) LM2901 TYP 100-mV input step with 5-mV overdrive 1.3 TTL-level input step 0.3 UNIT µs CL includes probe and jig capacitance. The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. Submit Documentation Feedback 7 LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS www.ti.com SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS SUPPLY CURRENT vs SUPPLY VOLTAGE INPUT BIAS CURRENT vs SUPPLY VOLTAGE 80 1.8 1.6 IIN – Input Bias Current – nA 1.4 ICC – Supply Current – mA 70 TA = –55°C TA = 25°C TA = 0°C 1.2 1 TA = 70°C 0.8 TA = 125°C 0.6 0.4 TA = –55°C 60 TA = 0°C 50 TA = 25°C 40 TA = 70°C 30 TA = 125°C 20 10 0.2 0 0 0 5 10 15 20 25 30 35 0 5 VCC – Supply Voltage – V 10 10 VO – Saturation Voltage – V 20 25 VCC – Supply Voltage – V OUTPUT SATURATION VOLTAGE 1 TA = 125°C TA = 25°C 0.1 TA = –55°C 0.01 0.001 0.01 0.1 1 10 IO – Output Sink Current – mA 8 15 Submit Documentation Feedback 100 30 35 LM139,, LM139A,, LM239,, LM239A LM339, LM339A, LM2901, LM2901AV, LM2901V QUAD DIFFERENTIAL COMPARATORS www.ti.com SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006 TYPICAL CHARACTERISTICS (continued) RESPONSE TIME FOR VARIOUS OVERDRIVES NEGATIVE TRANSITION RESPONSE TIME FOR VARIOUS OVERDRIVES POSITIVE TRANSITION 6 6 5 5 VO – Output Voltage – V VO – Output Voltage – V Overdrive = 5 mV 4 Overdrive = 20 mV 3 Overdrive = 100 mV 2 1 0 -1 -0.3 Overdrive = 5 mV 4 Overdrive = 20 mV 3 Overdrive = 100 mV 2 1 0 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 -1 -0.3 t – Time – µs 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25 t – Time – µs Submit Documentation Feedback 9 PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 PACKAGING INFORMATION Orderable Device Status (1) 5962-7700801VCA ACTIVE CDIP J 14 1 TBD 5962-87739012A ACTIVE LCCC FK 20 1 TBD 5962-8773901CA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type 5962-8773901DA ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type 77008012A ACTIVE LCCC FK 20 1 TBD 7700801CA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type 7700801DA ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type JM38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish A42 SNPB MSL Peak Temp (3) N / A for Pkg Type POST-PLATE N / A for Pkg Type POST-PLATE N / A for Pkg Type LM139AD ACTIVE SOIC D 14 50 TBD CU NIPDAU Level-3-245C-168 HR LM139ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM139ADR ACTIVE SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM139ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM139AFKB ACTIVE LCCC FK 20 1 TBD LM139AJ ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type LM139AJB ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type POST-PLATE N / A for Pkg Type LM139AN OBSOLETE PDIP N 14 TBD Call TI LM139AW ACTIVE CFP W 14 1 TBD A42 SNPB Call TI N / A for Pkg Type LM139AWB ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type LM139D ACTIVE SOIC D 14 50 TBD CU NIPDAU Level-1-220C-UNLIM LM139DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM139DR ACTIVE SOIC D 14 2500 TBD CU NIPDAU Level-1-220C-UNLIM LM139DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM139FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type LM139FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type LM139J ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type LM139JB ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type LM139N OBSOLETE PDIP N 14 TBD Call TI LM139W ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type LM139WB ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type LM239AD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239ADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239ADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Call TI PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM239AN OBSOLETE PDIP N 14 LM239D ACTIVE SOIC D 14 LM239DE4 ACTIVE SOIC D LM239DG4 ACTIVE SOIC LM239DR ACTIVE LM239DRE4 Lead/Ball Finish MSL Peak Temp (3) no Sb/Br) TBD Call TI 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM239NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM239PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM239PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901AVQDR NRND SOIC D 14 2500 CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM2901AVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-250C-UNLIM CU NIPDAU Level-1-260C-UNLIM Pb-Free (RoHS) LM2901AVQPWR ACTIVE TSSOP PW 14 2000 LM2901AVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) LM2901D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901N ACTIVE PDIP N 14 CU NIPDAU N / A for Pkg Type 25 Addendum-Page 2 TBD Call TI Pb-Free (RoHS) PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM2901NE4 ACTIVE PDIP N 14 LM2901NSR ACTIVE SO NS 14 LM2901NSRE4 ACTIVE SO NS LM2901NSRG4 ACTIVE SO LM2901PW ACTIVE LM2901PWE4 25 Pb-Free (RoHS) Lead/Ball Finish MSL Peak Temp (3) CU NIPDAU N / A for Pkg Type 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901PWLE OBSOLETE TSSOP PW 14 LM2901PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2901QD OBSOLETE SOIC D 14 TBD Call TI Call TI LM2901QN OBSOLETE PDIP N 14 TBD Call TI Call TI LM2901VQDR NRND SOIC D 14 2500 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM2901VQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM CU NIPDAU Level-1-250C-UNLIM CU NIPDAU Level-1-260C-UNLIM Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TBD Call TI LM2901VQPWR ACTIVE TSSOP PW 14 2000 LM2901VQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) LM339AD ACTIVE SOIC D 14 LM339ADBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339ADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339ADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339AN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM339ANE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM339ANSR ACTIVE SO NS 14 CU NIPDAU Level-1-260C-UNLIM 50 TBD Call TI 2000 Green (RoHS & Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM339ANSRG4 ACTIVE SO NS 14 LM339APW ACTIVE TSSOP PW 14 90 LM339APWE4 ACTIVE TSSOP PW 14 LM339APWG4 ACTIVE TSSOP PW 14 LM339APWR ACTIVE TSSOP PW LM339APWRE4 ACTIVE TSSOP LM339APWRG4 ACTIVE LM339D Lead/Ball Finish MSL Peak Temp (3) no Sb/Br) 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE SOIC D 14 CU NIPDAU Level-1-260C-UNLIM LM339DBLE OBSOLETE SSOP DB 14 LM339DBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339DBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM339NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type LM339NSLE OBSOLETE SO NS 14 LM339NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339NSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339PWLE OBSOLETE TSSOP PW 14 LM339PWR ACTIVE TSSOP PW 14 50 Green (RoHS & no Sb/Br) TBD TBD TBD 2000 Green (RoHS & Addendum-Page 4 Call TI Call TI Call TI CU NIPDAU Call TI Call TI Call TI Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com 9-Oct-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM339PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM339Y OBSOLETE Lead/Ball Finish MSL Peak Temp (3) no Sb/Br) 0 TBD Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 4-Oct-2007 TAPE AND REEL BOX INFORMATION Device Package Pins Site Reel Diameter (mm) Reel Width (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM239ADR D 14 SITE 27 330 16 6.5 9.0 2.1 8 16 Q1 LM239ADR D 14 SITE 41 330 16 6.5 9.0 2.1 8 16 Q1 LM239DR D 14 SITE 27 330 16 6.5 9.0 2.1 8 16 Q1 LM239DR D 14 SITE 41 330 16 6.5 9.0 2.1 8 16 Q1 LM239PWR PW 14 SITE 41 330 12 7.0 5.6 1.6 8 12 Q1 LM2901DR D 14 SITE 27 330 16 6.5 9.0 2.1 8 16 Q1 LM2901DR D 14 SITE 41 330 16 6.5 9.0 2.1 8 16 Q1 LM2901NSR NS 14 SITE 41 330 16 8.2 10.5 2.5 12 16 Q1 LM2901PWR PW 14 SITE 41 330 12 7.0 5.6 1.6 8 12 Q1 LM339ADBR DB 14 SITE 41 330 16 8.2 6.6 2.5 12 16 Q1 LM339ADR D 14 SITE 27 330 16 6.5 9.0 2.1 8 16 Q1 LM339ADR D 14 SITE 41 330 16 6.5 9.0 2.1 8 16 Q1 LM339ANSR NS 14 SITE 41 330 16 8.2 10.5 2.5 12 16 Q1 LM339APWR PW 14 SITE 41 330 12 7.0 5.6 1.6 8 12 Q1 LM339DBR DB 14 SITE 41 330 16 8.2 6.6 2.5 12 16 Q1 LM339DR D 14 SITE 27 330 16 6.5 9.0 2.1 8 16 Q1 LM339DR D 14 SITE 41 330 16 6.5 9.0 2.1 8 16 Q1 LM339NSR NS 14 SITE 41 330 16 8.2 10.5 2.5 12 16 Q1 LM339PWR PW 14 SITE 41 330 12 7.0 5.6 1.6 8 12 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 4-Oct-2007 Device Package Pins Site Length (mm) Width (mm) Height (mm) LM239ADR D 14 SITE 27 342.9 336.6 28.58 LM239ADR D 14 SITE 41 346.0 346.0 33.0 LM239DR D 14 SITE 27 342.9 336.6 28.58 LM239DR D 14 SITE 41 346.0 346.0 33.0 LM239PWR PW 14 SITE 41 346.0 346.0 29.0 LM2901DR D 14 SITE 27 342.9 336.6 28.58 LM2901DR D 14 SITE 41 346.0 346.0 33.0 LM2901NSR NS 14 SITE 41 346.0 346.0 33.0 LM2901PWR PW 14 SITE 41 346.0 346.0 29.0 LM339ADBR DB 14 SITE 41 346.0 346.0 33.0 LM339ADR D 14 SITE 27 342.9 336.6 28.58 LM339ADR D 14 SITE 41 346.0 346.0 33.0 LM339ANSR NS 14 SITE 41 346.0 346.0 33.0 LM339APWR PW 14 SITE 41 346.0 346.0 29.0 LM339DBR DB 14 SITE 41 346.0 346.0 33.0 LM339DR D 14 SITE 27 342.9 336.6 28.58 LM339DR D 14 SITE 41 346.0 346.0 33.0 LM339NSR NS 14 SITE 41 346.0 346.0 33.0 LM339PWR PW 14 SITE 41 346.0 346.0 29.0 Pack Materials-Page 2 MECHANICAL DATA MLCC006B – OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0°–ā8° 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0°– 8° A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Telephony www.ti.com/telephony Low Power Wireless www.ti.com/lpw Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated