CF Series Commercial Bandpass Filter Overview Standard Parameters Frequency Range Percentage Special Parameters 20 to 1500 MHz 5 to 2500 MHz 1 to 100% 0.5 to 200% 1.5:1 1.2:1 1 Watt Up to 5 Watts Comments Bandwidth Maximum VSWR Average Input Measured up to 10,000 feet Power Phase Linearity ± 5° ± 2° Phase Matching ± 2° ± 1° Up to 50 dBc Up to 65 dBc Topology Chebychev *Consult Factory Nominal 50 Ohms **Consult Factory 5 See chart below Shock 5 G's Up to 500 G's See Below Vibration 5 G's Up to 500 G's See Below Humidity 90%, non-condensing Up to 100%, non-condensing See Below Unlimited Unlimited See Below 0 to +50 °Celsius -55 to +125 °Celsius See Below -55 to +85 °Celsius -65 to +150 °Celsius See Below As required As required Additional testing charges will apply Additional testing charges will apply Maximum Attenuation Impedance Number of Sections Alititude Operating Temperature Storage Temperature Gross Leak Fine Leak Moisure As required As required 100% 100% Length Height Number of Castellations 0.75" 0.33" 10 Resistance Number of Sections*** 2 to 3 http://www.mtronpti.com/products/Filter/Bandpass/cf-series-commercial-bandpass 20140227 Need help now? Visit Mtronpti.com and click… Request a Quote Number of Find a Rep or Distributor Contact Length Height Number of Castellations 4 to 5 1.00" 0.33" 12 5 to 7 1.25" 0.36" 14 Sections*** 6 to 8 1.50" 0.36" 16 9 to 10 1.75" 0.50" 18 Special 2.00" 0.50" 20 WARNING: This commercial grade filter series is NOT Hermeticlly sealed. Hermeticity is NOT offered with this product line. Other parameters may be specified. Please consult factory for any deviation from standard. *Other topologies are available upon request or design need. These can include, but are not limited to: Gaussian, Butterworth, Bessel, Elliptical, and Pole-placed designs. **Other impedances can be achieved, but the package is designed as a 50 Ohm unit. Matching to any other impedance will need prior approval and may not be guaranteed. ***Dependant upon frequency range & design requirements. Exact size to be quoted by factory. Any environmental testing will incure additional charges. Consult factory for costs associated with environmental testing. All filters can be "Designed to" and may not require the additional testing. Each application will be different. Orlando Shanghai 2525 Shader Rd Orlando, FL 32804 USA Phone: 407-298-2000 Fax: 407-293-2979 Room 2215, 22/F Tomson Commercial Building 710 Dongfang Road Pudong, Shanghai, China Phone: 86-21-6165-2282 Fax: 86-21-6165-2283 Yankton Asia Pacific 1703 E. Highway 50 Yankton, SD 57078-0630 USA Phone: 605-665-9321 Toll Free: 800-762-8800 Fax: 605-665-1709 Unit 1108, 11th Floor, APEC Plaza 48 Hoi Yuen Road Kwun Tong, Kowloon, Hong Kong, China Phone: 852-2866-8023 Fax: 852-2529-1822 Europe India Noida SDF-D3 Zone (NSEZ) Special Economic Noida - 201305 (U.P.) New Delhi, India Phone 91-120-256-2014 Fax: 91-120-256-3242 Bolwerk 26 Veldhoven – 5509 MH Netherlands Phone: 31-40-368-6818 Fax: 31-40-368-3501 MtronPTI may change specifications without notice to improve end application performance or product manufacturability. No liability is assumed as a result of product use or application. Please contact MtronPTI for latest information. Copyright © 2014 MtronPTI http://www.mtronpti.com/products/Filter/Bandpass/cf-series-commercial-bandpass 20140227