AO3162 600V,0.034A N-Channel MOSFET General Description Product Summary The AO3162 is fabricated using an advanced high voltage MOSFET process that is designed to deliver high levels of performance and robustness in popular AC-DC applications. By providing low RDS(on), Ciss and Crss along with guaranteed avalanche capability this device can be adopted quickly into new and existing offline power supply designs. Top View VDS 700V@150℃ ID (at VGS=10V) 0.034A RDS(ON) (at VGS=10V) < 500Ω SOT23A Bottom View D D D G S G S S G Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS VGS Gate-Source Voltage Continuous Drain CurrentA,F TA=25°C Pulsed Drain Current B Peak diode recovery dv/dt TA=25°C Power Dissipation A IDM dv/dt PD TA=70°C Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A Maximum Junction-to-Lead Rev0: May 2012 C Steady-State Steady-State ±30 V 0.028 A 0.16 5 1.39 V/ns W 0.89 TJ, TSTG Symbol t ≤ 10s Units V 0.034 ID TA=70°C Maximum 600 RθJA RθJL www.aosmd.com -50 to 150 Typ 70 100 63 °C Max 90 125 80 Units °C/W °C/W °C/W Page 1 of 5 AO3162 Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter Conditions Min Typ Max ID=250µA, VGS=0V, TJ=25°C ID=250µA, VGS=0V, TJ=150°C 600 - - - 700 - Units STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage BVDSS /∆TJ Zero Gate Voltage Drain Current IDSS Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VDS=0V, VGS=±30V VGS(th) Gate Threshold Voltage VDS=5V, ID=8µA RDS(ON) Static Drain-Source On-Resistance VGS=10V, ID=0.016A gFS Forward Transconductance VDS=40V, ID=0.016A VSD Diode Forward Voltage IS=0.016A,VGS=0V IS Maximum Body-Diode Continuous Current ISM Maximum Body-Diode Pulsed Current - ID=250µA, VGS=0V - 0.69 VDS=600V, VGS=0V - VDS=480V, TJ=125°C - DYNAMIC PARAMETERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=25V, f=1MHz VGS=0V, VDS=0V, f=1MHz SWITCHING PARAMETERS Qg Total Gate Charge VGS=10V, VDS=400V, ID=0.01A V o - V/ C - 1 - 10 µA - - ±100 2.8 3.2 4.1 nΑ V - 154 500 Ω - 0.045 - S - 0.74 1 V - - 0.034 A - 0.16 A - 4.2 6 pF - 0.45 0.6 pF - 0.05 0.07 pF 14 28 42 Ω - 0.1 0.15 nC - 0.03 0.05 nC nC Qgs Gate Source Charge Qgd Gate Drain Charge - 0.05 0.08 tD(on) Turn-On DelayTime - 13.8 20 ns tr Turn-On Rise Time - 10 15 ns - 39.2 57 ns - 13 19 ns - 105 160 - 9.5 14.3 ns nC tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time Qrr VGS=10V, VDS=300V, ID=0.01A, RG=6Ω IF=0.016A,dI/dt=100A/µs,VDS=300V Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge IF=0.016A,dI/dt=100A/µs,VDS=300V A: The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The value in any given application depends on the user's specific board design. B: Repetitive rating, pulse width limited by junction temperature. C. The R θJA is the sum of the thermal impedence from junction to lead R θJL and lead to ambient. D. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max. E. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A=25°C. The SOA curve provides a single pulse rating. F. The current rating is based on the t ≤ 10s thermal resistance rating. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev0: May 2012 www.aosmd.com Page 2 of 5 AO3162 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 0.04 0.025 0.035 VDS=40V 10V 0.03 0.02 0.015 5V 0.02 ID(A) ID (A) 0.025 25°C 0.01 0.015 4.5V 0.01 0.005 0.005 VGS=4V 0 0 0 2 4 6 8 10 0 1 VDS (Volts) Fig 1: On-Region Characteristics 300 3 4 5 6 Normalized On-Resistance 2.5 250 VGS=10V 200 RDS(ON) (Ω Ω) 2 VGS(Volts) Figure 2: Transfer Characteristics 150 100 50 0 2 VGS=10V ID=0.016A 1.5 1 0.5 0 0 0.01 0.02 0.03 0.04 -75 -25 25 75 125 175 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 1.2 1.0E+00 40 1.0E-01 1.1 1 IS (A) BVDSS (Normalized) ID=30A 125° 0.9 125°C 1.0E-02 1.0E-03 25°C 25° 0.8 1.0E-04 -100 Rev0: May 2012 -50 0 50 100 150 200 TJ (oC) Figure 5: Break Down vs. Junction Temperature www.aosmd.com 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics Page 3 of 5 AO3162 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100.00 10 VDS=400V ID=0.01A 10.00 Capacitance (pF) VGS (Volts) 8 6 4 Ciss Coss 1.00 Crss 0.10 2 0 0.01 0.00 0.03 0.06 0.09 Qg (nC) Figure 7: Gate-Charge Characteristics 0.12 0.1 1 1 10 VDS (Volts) Figure 8: Capacitance Characteristics 120 100µs 100 1ms 80 TJ(Max)=150°C TA=25°C RDS(ON) limited 0.01 10ms 0.1s 1s 10s DC Power (W) 0.1 ID (Amps) 100 60 40 0.001 TJ(Max)=150°C TA=25°C 20 0.0001 0 1 10 100 1000 0.0001 VDS (Volts) 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) Zθ JC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TA+PDM.ZθJA.RθJA RθJA=125°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD 0.01 Single Pulse Ton T 0.001 1E-05 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note E) Rev0: May 2012 www.aosmd.com Page 4 of 5 AO3162 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + VDC - VDC DUT Qgs Vds Qgd - Vgs Ig Charge Res istive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs + VDC 90% Vdd - Rg 10% Vgs Vgs t d(on) tr t d(off) t on tf t off Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L EAR= 1/2 LI Vds 2 AR BVDSS Vds Id + Vgs Vgs VDC - Rg Vdd I AR Id DUT Vgs Vgs Diode Recovery Tes t Circuit & Waveforms Qrr = - Idt Vds + DUT Vgs Vds - Isd Vgs Ig Rev0: May 2012 L Isd + Vdd trr dI/dt IRM Vdd VDC - IF Vds www.aosmd.com Page 5 of 5