MDM (Military M83401) Vishay Dale Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics FEATURES • • • • • MIL-PRF-83401 qualified Epoxy molded construction All device leads are hot-solder dipped Available in tube pack TCR available in “K” (± 100 ppm/°C) or “M” (± 300 ppm/°C) depending on style • 100 % screen tested per Group A, Subgroup 1 of MIL-PRF-83401 • All devices are capable of passing the MIL-STD-202, Method 210, Condition D, “Resistance to Soldering Heat” test STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PINS NO RESISTOR POWER RATING MAX. at 70 °C W 0.10 0.20 0.05 0.10 0.20 0.05 SCHEMATIC MDM 14 01 MDM 14 03 MDM 14 05 MDM 16 01 MDM 16 03 MDM 16 05 Notes (1) K = ± 100 ppm/°C; M = ± 300 ppm/°C (2) ± 1 % and ± 5 % tolerances available on request PACKAGE POWER RATING MAX. at 70 °C W 1.30 1.40 1.20 1.50 1.60 1.40 RESISTANCE RANGE Ω STANDARD TOLERANCE ±% TEMPERATURE WEIGHT COEFFICIENT g (- 55 °C to + 125 °C) 10 - 1M 10 - 1M Consult factory 10 - 1M 10 - 1M Consult factory ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) ± 2 (± 1, ± 5) (2) K, M (1) K, M (1) K, M (1) K, M (1) K, M (1) K, M (1) 1.3 1.3 1.3 1.5 1.5 1.5 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format) M 8 3 4 0 1 0 1 M 2 2 0 CHARACTERISTIC RESISTANCE TOLERANCE VALUE 01 = 14 Pin K = 100 ppm 3 digit significant F=±1% M83401 figure, followed 02 = 16 Pin M = 300 ppm G=±2% by a multiplier J=±5% 10R0 = 10 Ω 3302 = 33 kΩ 1004 = 1 MΩ Historical Part Number example: M8340101M2201GB (will continue to be accepted) 2201 01 M83401 M MIL STYLE 1 SPEC SHEET MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE G B D 0 4 SCHEMATIC PACKAGING A = Isolated B = Bussed D04 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code G B D04 TOLERANCE SCHEMATIC PACKAGING New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format) M 8 3 4 0 1 0 2 K A 0 0 RESISTANCE TOLERANCE VALUE Per std. Mil. Spec F=±1% M83401 01 = 14 Pin K = 100 ppm (see Impedence G=±2% 02 = 16 Pin M = 300 ppm codes table) J=±5% Historical Part Number example: M8340102KA001GJ (will continue to be accepted) M83401 02 K A001 MIL STYLE MIL STYLE www.vishay.com 1 1 SPEC SHEET CHARACTERISTIC SPEC SHEET CHARACTERISTIC RESISTANCE VALUE G J D 0 4 SCHEMATIC PACKAGING J = Dual Terminator D04 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code G J D04 TOLERANCE SCHEMATIC PACKAGING For technical questions, contact: [email protected] Document Number: 31516 Revision: 08-Jul-08 MDM (Military M83401) Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics Vishay Dale DIMENSIONS in inches [millimeters] 0.310 ± 0.010 [7.87 ± 0.254] TYP 0.030 [0.762] A ± 0.010 [0.254] 0.250 ± 0.005 [6.35 ± 0.127] 0.120 ± 0.005 [3.05 ± 0.127] Pin #1 Identification 0.130 + 0.015 - 0.005 [3.30 + 0.381 - 0.127] Pin #1 0.075 ± 0.015 [1.91 ± 0.381] 0.018 ± 0.003 [0.457 ± 0.076] 0.290 Min. 0.320 Nom. 0.360 Max. [7.37 Min. 8.13 Nom. 9.14 Max.] 0.100 ± 0.010 [2.54 ± 0.254] Non-Accumulative Tol. "C" Spaces B ± 0.010 [0.254] VISHAY DALE MODEL 0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051] 0.050 ± 0.005 [1.27 ± 0.127] A B C MDM14 0.750 [19.05] 0.600 [15.24] 6 MDM16 0.850 [21.59] 0.700 [17.78] 7 IMPEDANCE CODES CODE R1 (Ω) R2 (Ω) CODE R1 (Ω) R2 (Ω) A001 82 130 A010 330 470 A002 120 200 A011 330 680 A003 130 210 A012 1.5K 3.3K A004 160 260 A013 3K 6.2K A005 180 240 A014 180 270 A006 180 390 A015 270 270 A007 220 270 A016 560 560 A008 220 330 A017 560 1.2K A009 330 390 A018 620 2.7K TECHNICAL SPECIFICATIONS PARAMETER UNIT Maximum Operating Voltage VDC MDM SERIES 100 Voltage Coefficient of Resistance Veff < 50 ppm Dielectric Strength VAC 200 per min. Insulation Resistance Ω 10 000 M Operating Temperature Range °C - 55 to + 125 Storage Temperature Range °C - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-PRF-83401 Solderability Per MIL-PRF-83401 Body Molded epoxy Terminals Copper alloy, hot-solder dipped Document Number: 31516 Revision: 08-Jul-08 For technical questions, contact: [email protected] www.vishay.com 2 MDM (Military M83401) Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics Vishay Dale CIRCUIT APPLICATIONS 01 SCHEMATIC MDM1401 (M8340101xxxxxxB) MDM1601 (M8340102xxxxxxB) 13 or 15 resistors with one pin common The MDMxx01 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin. Commonly used in the following applications: • • • • • • • • • MOS/ROM Pull-up/Pull-down • Open Collector Pull-up • “Wired OR” Pull-up • Power Driven Pull-up MDM1401 Pin #1 MDM1601 03 SCHEMATIC • TTL Input Pull-down • Digital Pulse Squaring • TTL Unused Gate Pull-up • High Speed Parallel Pull-up MDM1403 (M8340101xxxxxxA) MDM1603 (M8340102xxxxxxA) 7 or 8 isolated resistors The MDMxx03 provides the user with a choice of 7 or 8 nominally equal resistors, with each resistor isolated from all others. Commonly used in the following applications: • “Wired OR” Pull-up • Long-line Impedance Balancing • Power Driven Pull-up • LED Current Limiting • Power Gate Pull-up • ECL Output Pull-down • Line Termination • TTL Input Pull-down MDM1403 Pin #1 MDM1603 05 SCHEMATIC R1 R1 R1 R2 R1 R2 R2 R1 R2 R1 R2 R1 R2 R2 R1 R1 R1 R2 R2 R2 R2 R1 R1 R1 R1 R2 R2 MDM1405 (M8340101xxxxxxJ) MDM1605 (M8340102xxxxxxJ) 12 or 14 resistor pairs The MDMxx05 provides the user with a choice of 12 or 14 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. R2 MDM1405, MDM1605 Pin #1 CAGE CODE: 91637 1.30 MDM 16 MDM 14 1.00 05 Schematic Power Rating (W) 1.50 03 Schematic Power Rating (W) Power Rating (W) 01 Schematic MDM 16 1.60 MDM 14 1.40 1.00 1.20 MDM 16 MDM 14 1.00 Single Resistor 0.20 Single Resistor 1.40 Single Resistor 0.10 0.05 - 55 Derating www.vishay.com 3 + 25 + 70 + 125 + 150 Ambient Temperature °C - 55 + 25 + 70 + 125 + 150 Ambient Temperature °C For technical questions, contact: [email protected] - 55 + 25 + 70 + 125 + 150 Ambient Temperature °C Document Number: 31516 Revision: 08-Jul-08 MDM (Military M83401) Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics Vishay Dale PERFORMANCE MAX. ΔR (Typical Test Lots) TEST CONDITIONS Power Conditioning 1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h ± 4 h at + 25 °C ambient temperature ± 0.50 % ΔR Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR Short Time Overload 2.5 x rated working voltage for 5 s ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) Low Temperature Operation 45 min at full rated working voltage at - 65 °C ± 0.25 % ΔR (Char. K) ± 0.50 % ΔR (Char. M) Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR Resistance to Soldering Heat Leads immersed in + 260 °C solder to within 1/16" of body for 10 s ± 0.25 % ΔR Shock Total of 18 shocks at 100 G's ± 0.25 % ΔR Vibration 12 h at maximum of 20 G's between 10 and 2000 Hz ± 0.25 % ΔR Load Life 1000 h at + 70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF” for full 1000 h period Terminal Strength 4.5 pound pull for 30 s ± 0.25 % ΔR Insulation Resistance 10 000 MΩ (minimum) - Dielectric Withstanding Voltage No evidence of arcing or damage (200 VRMS for 1 min) - Document Number: 31516 Revision: 08-Jul-08 For technical questions, contact: [email protected] ± 0.50 % ΔR (Char. K) ± 2.00 % ΔR (Char. M) www.vishay.com 4 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1