NTE2414 (NPN) & NTE2415 (PNP) Silicon Complementary Transistors Digital w/2 Built–In Bias 10k Resistors (Surface Mount) Features: D Built–In Bias Resistors D Small SOT–23 Surface Mount Package Applications: D Switching Circuits D Inverters D Interface Circuits D Driver Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Collector–Base Voltage, VCBO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V Collector–Emitter Voltage, VCEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V Emitter–Base Voltage, VEBO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10V Collector Current, IC Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA Peak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200mA Collector Dissipation, PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200mW Operating Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C Electrical Characteristics: (TA = +25°C unless otherwise specified) Parameter Symbol Test Conditions Min Typ Max Unit ICBO VCB = 40V, IE = 0 – – 0.1 µA ICEO VCE = 40V, IB = 0 – – 0.5 µA Emitter Cutoff Current IEBO VEB = 5V, IC = 0 170 250 330 µA DC Current Gain hFE VCE = 5V, IC = 10mA 50 – – Collector Cutoff Current Collector–Base Breakdown Voltage V(BR)CBO IC = 10µA, IE = 0 50 – – V Collector–Emitter Breakdown Voltage V(BR)CBO IC = 100µA, RBE = ∞ 50 – – V Collector–Emitter Saturation Voltage VCE(sat) IC = 10mA, IB = 0.5mA – 0.1 0.3 V – 250 – MHz – 200 – MHz Current Gain–Bandwidth Product NTE2414 NTE2415 fT VCE = 10V, IC = 5mA Electrical Characteristics (Cont’d): (TA = +25°C unless otherwise specified) Parameter Symbol Output Capacitance NTE2414 Cob Test Conditions Min Typ Max Unit – 3.5 – pF – 5.3 – pF VCB = 10V, f = 1MHz NTE2415 Input OFF Voltage VI(off) VCE = 5V, IC = 100µA 0.8 1.1 1.5 V Input ON Voltage VI(on) VCE = 0.2V, IC = 10mA 1.0 2.0 4.0 V Input Resistance R1 7 10 13 kΩ R1/R2 0.9 1.0 1.1 Input Resistance Ratio Output PNP NPN Output Input Input GND GND .016 (0.48) C B .098 (2.5) Max E .037 (0.95) .074 (1.9) .118 (3.0) Max .051 (1.3) .043 (1.1) .007 (0.2)