MADL-011021-14150T PIN-Schottky Anti-Parallel Diode Limiter 10 MHz - 6 GHz Features Rev. V1 Functional Schematic 3 Terminal LPF Broadband Shunt Structure 10 MHz - 6 GHz Broadband Frequency > 2.5 W Peak and CW Power Handling < 0.5 dB Shunt Insertion Loss < +15 dBm Flat Leakage Power Lead-Free 1.5 x 1.2 mm 6-lead TDFN Package RoHS* Compliant and 260oC Reflow Compatible Description The MADL-011021 is a lead-free 1.5 x 1.2 mm TDFN surface mount plastic packaged that provides both low and high signal frequency operation from 10 MHz to 6 GHz. The anti-parallel arrangement of the PIN limiter and schottky diode provides for broadband performance, eliminating the need for a shunt coil as a DC return. This device is ideally suitable for usage in higher frequency and lower flat leakage limiter microwave circuits applications where higher performance surface mount diode assemblies are required. N/C 1 6 N/C RFIN 2 5 RFOUT N/C 3 4 N/C 7 GND Top view Pin Configuration3 Ordering Information1,2 Pin No. Pin Name Description 1 N/C No Connection 2 RFIN RF Input 3 N/C No Connection Part Number Package 4 N/C No Connection MADL-011021-14150T 3000 piece reel 5 RFOUT RF Output MADL-011021-000SMB Sample board 6 N/C No Connection 7 Paddle4 Ground 1. Reference Application Note M513 for reel size information. 2. All RF Sample boards include 5 loose parts. 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF, DC, and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MADL-011021-14150T PIN-Schottky Anti-Parallel Diode Limiter 10 MHz - 6 GHz Rev. V1 Electrical Specifications: TA = +25°C Parameter Test Conditions Units Min. Typ. Max. Insertion Loss P incident = -10 dBm, F = 750 MHz dB — 0.15 0.20 Return Loss P incident = -10 dBm, F = 750 MHz dB — 20 — P1dB Input Compression Power F = 1 GHz dBm — +5 — C.W. Incident Power5 F = 4 GHz dBm — 34 — Peak Incident Power5 1 µs, 1 % duty @ 4 GHz dBm — 34 — Flat Leakage Power6 +34 dBm, 1 µs, 1 % duty @ 4 GHz dBm — 18 — Spike Leakage Power6,7 +34 dBm, 1 µs, 1 % duty @ 4 GHz dBm — 20 — Spike Leakage Energy6,7 +34 dBm, 1 µs, 1 % duty @ 4 GHz ergs — 0.01 — Recovery Time5,6,7 ( 1 db of Insertion Loss ) +34 dBm, 1 µs, 1 % duty @ 4 GHz ns — 100 — Input 3rd Order Intermodulation Products (IIP3) P incident = -10 dBm, F1 = 1.000 GHz, F2 = 1.010 GHz dBm — 15 — 5. Incident power ratings defined with 1.2;1 source VSWR and 1.2:1 max load VSWR. 6. Peak incident power defined at 1 µs RF pulse width, 1% duty cycle 7. Spike leakage power and recovery time values are defined at peak power conditions. Absolute Maximum Ratings8,9 Parameter Absolute Maximum Peak Incident Power 1 µs pulse, 1% duty (+85°C) +33 dBm CW Incident Power (+85°C) +33 dBm Junction Temperature +175°C Operating Temperature -65°C to +125°C Storage Temperature -65°C to +150°C 8. Exceeding any one or combination of these limits may cause permanent damage to this device. 9. MACOM does not recommend sustained operation near these survivability limits. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MADL-011021-14150T PIN-Schottky Anti-Parallel Diode Limiter 10 MHz - 6 GHz PCB Layout Rev. V1 PCB Schematic RFIN C1 C2 7 RFOUT GND Handling Procedures Parts List Part Value Case Style C1, C2 ( DC Blocks ) 100 pF 0402 Please observe the following precautions to avoid damage: Static Sensitivity These devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Lead-Free 1.5 x 1.2 mm 6-Lead TDFN† NOTES: 1. REFERENCE JEDEC MO-153-AB FOR ADDITIONAL DIMENSIONAL AND TOLERANCE INFORMATION. 2. ALL DIMENSIONS SHOWN AS INCHES/MM. † 3 Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MADL-011021-14150T PIN-Schottky Anti-Parallel Diode Limiter 10 MHz - 6 GHz Rev. V1 Typical Performance Curves @ +25°C Return Loss vs. Frequency Insertion Loss vs. Frequency 0.0 0 -0.2 -5 -0.4 -10 -0.6 -15 -0.8 -20 -1.0 0 1 2 3 4 5 6 -25 0 1 2 3 4 5 Frequency (GHz) Frequency (GHz) Flat Leakage Power @ CW and Pulsed Power, 4 GHz 20 16 1 µs, 1% duty CW 12 8 4 0 10 15 20 25 30 35 Input Power (dBm) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 6 MADL-011021-14150T PIN-Schottky Anti-Parallel Diode Limiter 10 MHz - 6 GHz Rev. V1 Applications Section Schematic of 3 Stage Limiter using MADL-011021-14150T F = 1 - 6 GHz, Pinc = +40 dBm CW, + 47 dBm, 5 us, 1 % duty C1 C2 RFIN RFOUT D1 D2 D3 Parts List10 Part PN Case Style Description Quantity D1 MADP-011029-14150T ODS-1415 Input PIN Diode 1 D2, D311 MADL-011021-14150T ODS-1415 2nd & 3rd Stage PIN Diode 1 C1, C2 22 pF 0402 DC Block 2 10. Parts list is shown for 1 - 6 GHz operation. Component values can be scaled for various frequency bands. 11. D2 and D3 are combined as single MADL-011021-14150T. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298