www.fairchildsemi.com MC78L05AB 3-Terminal 0.1A 5V Positive Voltage Regulator Features Description • • • • • The MC78L05AB series of fixed voltage monolithic integrated circuit voltage regulators are suitable for application that required supply current up to 100mA. Maximum Output Current of 100mA Output Voltage of 5V Thermal Overload Protection Short Circuit Current Limiting Output Voltage Offered in ±5% Tolerance TO-92 123 1. Output 2. GND 3. Input 8-SOP 8 1 1. Output 2. GND 3. GND 4. NC 5. NC 6. GND 7. GND 8. Input Internal Block Diagram InpuVt I 3 THERMAL SHUTDOWN CIRCUIT I REFERENCE VOLTAGE + - SHORT CIRCUIT PROTECTION GND 2 RSC V 0 Outpu t 1 Rev. 1.0.0 ©2002 Fairchild Semiconductor Corporation MC78L05AB Absolute Maximum Ratings (Ta=25°C, Unless otherwise noted, Note 5) Parameter Symbol Value Unit Input Voltage VI 30 V Maximum Operating Junction Temperature TJ +150 °C TSTG -65 ~ +150 °C Storage Temperature Range Electrical Characteristics (VI = 10V, IO = 40mA, -40°C ≤ TJ ≤ 125°C, CI = 0.33µF, CO = 0.1µF, unless otherwise specified. (Note 1)) Parameter Symbol Output Voltage Line Regulation (Note1) Load Regulation (Note1) Conditions VO TJ = 25°C ∆VO TJ = 25°C ∆VO TJ = 25°C Min. Typ. Max. Unit 4.8 5.0 5.2 V 7V ≤ VI ≤ 20V - 8 150 mV 8V ≤ VI ≤ 20V - 6 100 mV 1mA ≤ IO ≤ 100mA - 11 60 mV 1mA ≤ IO ≤ 40mA - 5.0 30 mV 7V ≤VI ≤ 20V 1mA ≤ IO ≤ 40mA - - 5.25 V Output Voltage VO 7V ≤VI ≤ VMAX (Note 2) 1mA ≤ IO ≤ 70mA 4.75 - 5.25 V Quiescent Current IQ TJ = 25°C - 2.0 5.5 mA Quiescent Current Change with line ∆IQ 8V ≤VI ≤ 20V - - 1.5 mA with load ∆IQ 1mA ≤ IO ≤ 40 mA(Note3) - - 0.5 mA VN TA = 25°C, 10Hz ≤ f ≤ 100kHz - 40 - µV/Vo IO = 5mA - -0.65 - mV/°C 41 80 - dB - 1.7 - V Output Noise Voltage(Note3) Temperature Coefficient of VO (Note3) ∆VO/∆T Ripple Rejection(Note3,4) RR f = 120Hz, 8V ≤ VI ≤ 18V, TJ = 25°C Dropout Voltage VD TJ = 25°C Note: 1. The maximum steady state usable output current and input voltage are very dependent on the heat sinking and/or lead length of the package. The data above represent pulse test conditions with junction temperature as indicated at the initiation of tests. 2. Power dissipation PD ≤ 0.75W. 3. These parameters although guaranteed over the recommended operating conditions are not 100% tested in production. 4. Recommend minimum load capacitance of 0.01uF to limit high frequency noise. 5. Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device outside of its stated operating conditions. * CI is required if regulator is located an appreciable distance from power supply filter. ** Co is not needed for stability; however, it does improve transient response. 2 MC78L05AB Typical Application 3(8) INPUT KA78LXXA MC78L05AB 1(1) OUTPUT NOTE 1 C1 0.33 µF NOTE12 NOTE 2(2,3,6,7) 0. 1 µF NOTE12 NOTE ’( )’ : 8SOP Type Note: 1. Bypass Capacitors are recommend for optimum stability and transient response and should be located as close as possible to the regulator 3 MC78L05AB Mechanical Dimensions Package Dimensions in millimeters TO-92 +0.25 4.58 ±0.20 4.58 –0.15 ±0.10 14.47 ±0.40 0.46 1.27TYP [1.27 ±0.20] 1.27TYP [1.27 ±0.20] ±0.20 4 (0.25) +0.10 0.38 –0.05 1.02 ±0.10 3.86MAX 3.60 (R2.29) +0.10 0.38 –0.05 MC78L05AB Mechanical Dimensions (Continued) Package Dimensions in millimeters 8-SOP MIN #5 6.00 ±0.30 0.236 ±0.012 8° 0~ +0.10 0.15 -0.05 +0.004 0.006 -0.002 MAX0.10 MAX0.004 1.80 MAX 0.071 3.95 ±0.20 0.156 ±0.008 5.72 0.225 0.41 ±0.10 0.016 ±0.004 #4 1.27 0.050 #8 5.13 MAX 0.202 #1 4.92 ±0.20 0.194 ±0.008 ( 0.56 ) 0.022 1.55 ±0.20 0.061 ±0.008 0.1~0.25 0.004~0.001 0.50 ±0.20 0.020 ±0.008 5 MC78L05AB Ordering Information Product Number Package MC78L05ABP TO-92 MC78L05ABD 8-SOP Output Voltage Tolerance Operating Temperature 5% -40 ~ +125°C DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com 7/10/02 0.0m 001 Stock#DSxxxxxxxx 2002 Fairchild Semiconductor Corporation