MIC-6311 OpenVPX CPU Blade with Intel® 4th Generation Core® Processor Features 4th Generation Intel® Core® processor up to 4 cores / 8 threads Intel® QM87 PCH Triple independent display support OpenVPX MOD6-PAY-4F1Q2U2T-12.2.1-2 profile compliant Onboard and SO-DIMM DDR3-1600 up to 16 GB with ECC support Two SRIOx4 ports and two PCIex8 ports on Fabric interface Two 1000BASE-T ports on Base interface Two 1000BASE-T front panel ports One CFast / one 2.5" SSD storage Device RoHS COMPLIANT 2002/95/EC Introduction Advantech’s MIC-6311 is a single processor VPX blade based on the Intel® 4th generation Core® i3/i5/i7 platform. It enables the highest performance available in 6U VPX form factor with two SRIOx4 ports in the VPX data plane and two PCI Express x8 gen. 3 lanes in the VPX expansion plane for workstation and compute intense applications. The two Serial RapidIO ports offer the possibility to interface the MIC-6311 to digital front ends such as DSP and FPGA cards via a high speed, low latency deterministic interconnect. In addition, PCI Express ports with up to 8GB/s throughput offer a high performance interface to mainstream peripherals and IO cards. With a SO-DIMM socket and additional soldered, onboard DRAM with ECC in a dual channel design running up to 1600MT/s, the MIC-6311 offers the ability to fit harsh environments while maintaining maximum memory throughput and supporting memory expansion using the latest SO DIMM technology. Moreover, the 4th generation Core® processors offer increased cache size and efficiency as well as instruction set improvements which make the MIC-6311 a high performance compute engine with outstanding floating point and vector processing performance. Tailored for rugged environments, MIC-6311 has been designed to support conduction-cooling heat sinks. Additionally, it implements an onboard soldered, industrial SSD for maximum reliability. By using Intel’s latest powerful PCH (Lynx Point) with its advanced SATA controller advanced storage options are supported such as a 2.5" SATA III HDD/SSD socket offering high storage capacity with up to 6Gbps transfer speed. A CFast socket provides an alternative for implementing a cost efficient, pluggable SSD. An onboard XMC/PMC site with PCIe x8 gen.3 connectivity can host high speed offload or I/O mezzanines. Two USB 3.0 ports in front panel can connect to the external devices with up to 5Gbps data rate. Network and remote connectivity can be achieved via a RS232 console (RJ45) and two GbE RJ45 ports, powered by intel’s latest Gigabit Ethernet Controiller, the i350. The processor’s integrated enhanced graphics engine Iris offers the up to 2x the graphic performance compared to previous generation solutions. Triple independent display support can be implemented by using the MIC-6311’s VGA front panel port and two Display port / HDMI interfaces on rear transition modules. Audio port support via the backplane interface enhances media support. Three SATA ports (SATAIII) and four USB ports (2x USB 3.0, 2x USB 3.0) are also connected to backplane to fulfill the demand for extra IO ports or storage. Two GbE/ SERDES ports support system level IP connectivity and two UART interfaces can be leveraged to interface to legacy devices and consoles. Specifications Processor System Memory VPX Interface Graphics Ethernet Front I/O Interface Operating System CPU Max. Speed Chipset BIOS Technology Max. Capacity Socket P1 P2 P3 P4 P5 Controller Controller Serial (COM) Ethernet USB Miscellaneous Compatibility All product specifications are subject to change without notice Intel® 4 th Generation Core i3/i5/i7 mobile processors up to 2.4 GHz (6MB L2 cache) 2.4 GHz Intel Lynx Point (QM87) Redundant AMI UEFI based 8MByte SPI flash Dual channel DDR3 1600MHz w/ ECC Configurable up to 16 GB 1 bank soldered onboard, 1x 204-pin SODIMM 2x SRIOx4 Gen2 2x PCIex8 (1 port NT Capable) 64s PMC IO 12d XMC IO; 2x 10/100/1000BT or 2x SerDes (on request) from I350 2x USB3.0; 2x USB 2.0; 3x SATA-III; DisplayPort x2; UART(2x); Audio; KB/Mouse from SIO Intel embedded graphic controller Iris (3 independent displays) Intel I350-AM4 Quad Port Gigabit Ethernet Controller 1 RS-232 on RJ-45 connector 2 x RJ-45 10/100/1000BASE-T 2x USB 3.0, 1x USB2.0 XMC/PMC, VGA Linux; Windows7; VxWorks6.x (on request) Last updated : 9-Jun-2015 MIC-6311 Specifications (Cont.) Storage Power Requirement Physical Characteristics 2.5" SSD/SATA CFast Onboard Flash Consumption SATA III SATA II 8G 56.3W total power envelope with 37W CPU (on request) 66.3W total power envelope with 47W CPU 6HP, 160.00 x 233.35 mm (6.30" x 9.19") (W x D) 0.95kg without peripherals Operating Grade 1: 0 ~ 55°C Grade 2: -25 ~ 70 °C (on request) 95% @ 40° C, non-condensing PCB Dimensions Weight Temperature Environment Humidity Bump Vibration (5 ~ 500 Hz) Altitude VPX Compliance Safety EMC Note: 1. CFast and 2.5" SSD are mutually exclusive. Non-operating -40 ~ 85 °C 95% @ 60° C, non-condensing 25G, 6ms 3.5Grms (without onboard HDD) 15,000ft, 55° C above sea level 40,000ft, -40° C above sea level OpenVPX (VITA 65) FCC class A, CE, RoHS FCC47 CFR Part15, Class A, CE Mark (EN55022/EN55024/EN300386) Ordering Information System Board Model Number MIC-6311-A1I8E MIC-6311-B1I8E MIC-6311-B2C8E Front Panel USB3.0 VGA (type A) 1 2 1 2 - USB2.0 (type A) 1 1 - Ethernet (RJ-45) 2 2 - Console (RJ-45) 1 1 - One CFast Socket / HDD mounting site XMC / PMC 1 1 - Main On-board Features Onboard CFast CPU Memory Socket i7-4700QE 8GB 1 i5-4402E 8GB 1 i5-4402E 8GB 1 Memory SODIMM socket Front panel (From left to right): VGA RJ45(console) USB2.0 USB3.0 XMC/ PMC USB 3.0 Two RJ45 One passive CPU heatsink Online Download www.advantech.com/products Storage Channel 1 SATA-III 1 SATA-III - SODIMM Socket 1 1 - BMC No No Yes