Features Regulated Converters ● ● ● ● ● ● ● ● ● ● ECONOLINE UL-60950-1 / CSA C22.2 certified 5W DIP Package 4kVDC & 6kVDC Isolation Regulated Output Continuous Short Circuit Protection Auto-Restarting Wide Input 2:1 & 4:1 UL94V-0 Package Material Cost Effective 100% Burned In Efficiency to 86% DC/DC-Converter REC5S_DRW/H4, H6 Series Selection Guide Part Number DIP24 Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Efficiency (%) REC5-xx3.3SRW (H4/H6) 9 - 18, 18 - 36, 36 - 72 3.3 1200 75-77 REC5-xx05SRW (H4/H6) 9 - 18, 18 - 36, 36 - 72 5 1000 79-81 REC5-xx09SRW (H4/H6) 9 - 18, 18 - 36, 36 - 72 9 556 82-83 REC5-xx12SRW (H4/H6) 9 - 18, 18 - 36, 36 - 72 12 420 84-85 REC5-xx15SRW (H4/H6) 9 - 18, 18 - 36, 36 - 72 15 340 85-86 REC5-xx05DRW (H4/H6) 9 - 18, 18 - 36, 36 - 72 ±5 ±500 79-81 REC5-xx12DRW (H4/H6) 9 - 18, 18 - 36, 36 - 72 ±12 ±210 84-85 REC5-xx15DRW (H4/H6) 9 - 18, 18 - 36, 36 - 72 ±15 ±170 85-86 REC5-xx3.3SRWZ (H4/H6) 9 - 36**, 18 - 72 3.3 1200 75-76 REC5-xx05SRWZ (H4/H6) 9 - 36**, 18 - 72 5 1000 81-82 REC5-xx09SRWZ (H4/H6) 9 - 36**, 18 - 72 9 556 82-83 REC5-xx12SRWZ (H4/H6) 9 - 36**, 18 - 72 12 420 83-84 REC5-xx15SRWZ (H4/H6) 9 - 36**, 18 - 72 15 340 84-85 REC5-xx05DRWZ (H4/H6) 9 - 36**, 18 - 72 ±5 ±500 81-82 REC5-xx12DRWZ (H4/H6) 9 - 36**, 18 - 72 ±12 ±210 82-83 REC5-xx15DRWZ (H4/H6) 9 - 36**, 18 - 72 ±15 ±170 84-85 2:1 Input (REC5-S/DRWH4/H6) xx = 9-18Vin = 12 xx = 18-36Vin = 24 xx = 36-72Vin = 48 5 Watt DIP24 / SMD Single & Dual Output 4:1 Input (REC5-S/DRWZ(H4/H6)) xx = 9-36Vin = 24 xx = 18-72Vin = 48 * add suffix "/H4" for 4kVDC isolation and "/H6" for 6kVDC isolation C" for Pinning, see next page add suffix "/AA" or "/C M" for metal case add suffix "/M e.g. REC5-xxxxSRW(Z)H4/A/M = 4kVDC isol. / Pinout "A" / metal case ** 24V 4:1 Wide Range Input Types (REC5-24xxS/DRWZ(H4/H6)) should be derated while 9 Vin : 3.3Vout / 1100mA, 5Vout / 900mA. Notes : M" for metal case and "/SSMD" for SMD pinout are combined the maximum allowed isolation 1. If the options "/M voltage is 2kVDC because of the shoter distances between pins and metal-case so only available SMD-optiH2". DIP-24 through-hole case and SMD-plastic case are not affected and offer the on in metal-case is "/H desired isolation barriers of 4kVDC for "/H4" option and 6kVDC for "/H6". Description This series offers high isolation of 4kVDC (= option "H4") or 6kVDC (= option "H6") making it ideal for medical applications and other sophisticated industrial applications. UL-1950 approval of this series is is applied for. Packaging can be either DIP-24 non-conductive plastic or 5-side-shielded DIP24 metal case (= option "M") as well as DIP24-SMD case (= option "SMD"). For all the above variants, 2 industry-standard-pinouts (= option "A" or "C") are available. www.recom-international.com April-2005 105 ECONOLINE REC5-S_DRW/H4,H6 Series DC/DC-Converter Specifications (Core Operating Area) Input Voltage Range 2:1 & 4:1 Output Voltage Accuracy ±2% max. Line Regulation (HL-LL) ±0.3% max. Load Regulation (for output load current change from 20% to 100%) ±0.6% max. Output Ripple and Noise (0,1µF capacitor on output, 20MHz BW) Operating Frequency at Full Load 2:1 input (at nominal input voltage) 4:1 input 50mVp-p max. 120kHz typ. 200kHz typ. Input Filter Pi Network Efficiency at Full Load see above Derating-Graph (Ambient Temperature) Isolation Voltage SMD Pinout and metal case (see note1) (tested for 1 second) 2.000VDC min. Rated Working Voltage (long term isolation) see Application Notes (tested for 1 second) (long term isolation) 4.000VDC min. see Application Notes Isolation Voltage H6 types Rated Working Voltage (tested for 1 second) (long term isolation) 6.000VDC min. see Application Notes Isolation Capacitance 60pF typ. Isolation Resistance 1 GΩ min. Short Circuit Protection 80 -25°C to +75°C (see Graph) Storage Temperature Range -55°C to +125°C Relative Humidity MSL Level 1 (3W) 60 (2W) 40 Continuous, Auto Restart Operating Temperature (free air convection) 0 Non-Conductive Plastic Thermal Impedance Natural convection -25 0 25 50 75 100 125 105 95 Operating Temperature °C 20°C/W for metal case Package Weight } Safe Operating Area 20 95% RH Case Material MTBF (+25°C) (+75°C) 100 Output Power (%) Isolation Voltage H4 types Rated Working Voltage 13 g 850 x 10 hours 206 x 103hours using MIL-HDBK 217F Detailed Information see Application Notes chapter "MTBF" using MIL-HDBK 217F 3 Typical Characteristics Single Single Efficiency / Load 100 80 Efficiency / Load 1212 1209 1205 123.3 100 80 60 60 20 0 0% 20% 40% 60% Total Output current (%) 80% 20 0 100% 80 4805 100 4812 80 Efficiency % Efficiency % 106 4812 80% 2405 40 20 0% 20% 40% 60% Total Output current (%) 100% 2415 1209 60 483.3 40 80% Efficiency / Load 60 0 0% 20% 40% 60% Total Output current (%) Dual Single Efficiency / Load 100 243.3 40 Efficiency % Efficiency % 40 2405 2412 20 100% April-2005 0 1215 0% 20% 40% 60% Total Output current (%) 80% 100% www.recom-international.com ECONOLINE REC5-S_DRW/H4,H6 Series DC/DC-Converter Package Style and Pinning (mm) DIP 24 , Wide Input 2:1 & 4:1 Package A 3rd angle projection 20.30 32.00 10.20 Pin Connections 3.81 Pin # Single Dual 2 –Vin –Vin 3 –Vin –Vin 9 NC Com 11 NC –Vout 14 +Vout +Vout 16 – Vout Com 22 +Vin +Vin 23 +Vin +Vin 15.24 0.51 4.60 Recommended Footprint Details 1.00 ø+0.15/0 2 3 9 11 16 14 Bottom View 23 22 2.54 Top View 2.54 Package C NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm 20.30 32.00 Pin Connections 10.20 3.81 15.24 0.51 2.06 Recommended Footprint Details 1.00 ø+0.15/0 1 2 10 11 12 Bottom View 24 23 15 2.54 13 2.54 Pin # Single Dual 1 +Vin +Vin 2 +Vin +Vin 10 NC Com 11 NC Com 12 –Vout NC 13 + Vout –Vout 15 NC +Vout 23 –Vin –Vin 24 –Vin –Vin NC = No Connection XX.X ± 0.5 mm XX.XX ± 0.25 mm Top View Mechanical drawings of DIP24 SMD case 32.00 19.90 31.40 11.20 2.54 10.90 3.81 20.30 6.35 25.40 Recommended Footprint Details Pin area 0.1 x 0.50 2.54 0.50 1.54 2.03 9 10 11 12 1 2 3 4 5 23.40 Bottom View 26.67 24.64 24 23 22 21 20 11 x 2.54 16 15 14 13 Top View Tol.: ± 0.35 mm 1 27.94 for all packages incl.SMD case the length of plastic case is 31,8mm, length of metal case 32.0mm www.recom-international.com April-2005 107