POWER DCH3 Series 3 Watts Data Sheet DCH3-050UK Total Power: 3 Watts Input Voltage: 100 - 254 Vac # of Outputs: Single DCH3-050US DCH3-050EU SPECIAL FEATURES USB Switching wallmount power supply Universal AC input Available in multiple AC plug configurations CE Mark EMC & LVD, & ErP 2011 for EU versions Regulated output Overload and short circuit protection Constant voltage, constant current Efficiency Level V Built in EMI filter (CISPR 22 Class B) Available in various output connectors Mini USB 2.0 dc output plug - 0005 Micro USB 2.0 dc output plug - 0006 SAFETY UL cUL TUV NEMKO CB CE 60950/6500 60950/6500 60950 60950 Certificate and report EMC,LVD & ErP 2011 for EU & UK versions Electrical Specifications Input Input range: 100 - 240 Vac (wide range) Frequency: EMI/RFI: 47 - 63 Hz Safety ground leakage current: 10 μA @ 50/60 Hz, 230 Vac input FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B & EMC89/336/EEC Output Voltage (Vo): 5 V (4.75 - 5.25 V) Maximum Power (Po): 3W Hold-up time: 25 ms. typical at full load @ 115 Vac Overvoltage protection: Single fault 10.5 V max. Latching type Overload protection: Output short circuit protection auto recover Overload protected > 800 mA Output: DC cable with Mini USB 2.0 -0005 suffix and Micro USB 2.0 -0006 Connector Pinout: Pin 1: +V Pin 5: ground CTIA ENEC Environmental Specifications Operating temperature: 0° to 45 °C ambient Storage temperature: -20 °C to +70 °C Electromagnetic susceptibility: Designed to meet EN55082-1 Humidity: Operating; non-condensing 20% to 90% RH Vibration: Per IEC 60068-2-6 DCH3 Series Data Sheet Ordering Information Model Number Maximum Power Output Voltage Minimum Load Maximum Load Ripple P/P (PARD)1 Connector DCH3-050US-0005 3W 5V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050EU-0005 3W 5V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050UK-0005 3W 5V 0 0.55 A 200 mV Mini USB 2.0 DCH3-050US-0006 3W 5V 0 0.55 A 200 mV Micro USB 2.0 DCH3-050EU-0006 3W 5V 0 0.55 A 200 mV Micro USB 2.0 DCH3-050UK-0006 3W 5V 0 0.55 A 200 mV Micro USB 2.0 1. Peak-to-peak with 20 mHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 2. Output should not be grounded for EMI purpose. Mechanical Drawing 2.44" (62) .736" (18.1) 1.075" (27.3) DCH3-050US - 0005 & 0006 LASER PRINTED LABEL 59" (1500) 1.028" (26.1) 2.283" (58) 2.56" (65) .74" (18.8) 1.06" (27) DCH3-050EU - 0005 & -0006 LASER PRINTED LABEL 1.028" (26.1) 2.283" (58) 59" (1500) DCH3 Series Data Sheet Mechanical Drawing 1.79" (45.5) .905" (23) DCH3-050UK - 0005 & - 0006 59" (1500) 2.016" (51.2) 2.275" (57.8) LASER PRINTED LABEL Pin Assignments PIN 5 (GROUND) PIN 1 (Vout) Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± .02”. 3. Warranty: 2 years 4. Weight: 0.144 lb./0.066kg. WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2014 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] DCH3 Series-DS 06.06.14