P-DUKE FEC30-12S1P8 30 watts dc-dc converter Datasheet

FEC30 SERIES
30 WATTS
DC-DC CONVERTER
FEATURES
• 30 WATTS MAXIMUM OUTPUT POWER
• OUTPUT CURRENT UP TO 6A
• STANDARD 2.00 X 1.60 X 0.40 INCH PACKAGE
• HIGH EFFICIENCY UP TO 90%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• OFFER SINGLE AND DUAL OUTPUT
• UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS
• CE MARKED
• COMPLIANT TO RoHS II & REACH
APPLICATIONS
Wireless Network
Telecom/Datacom
Industry Control System
Measurement Equipment
Semiconductor Equipment
DESCRIPTION
The FEC30 series offer 30 Watts of output power from a 2.00 x 1.60 x
0.40 inch package. The FEC30 series with 2:1 wide input voltage of
9~18VDC, 18~36VDC and 36~75VDC and features 1600VDC of
isolation, short-circuit and over-voltage protection.
T E C H N I C A L S P E C I F I C AT I O N
All specifications are typical at nominal input, full load and 25ºC otherwise noted
OUTPUT SPECIFICATIONS
INPUT SPECIFICATIONS
Output power
30 Watts, max.
Voltage accuracy
± 1%
Minimum load
0%
Voltage adjustability
± 10%
± 0.2%
± 0.5%
± 0.5%
± 1%
± 5%
Single
Dual
Single
Load regulation
No Load to Full Load
Dual
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
Line regulation
Ripple and noise
LL to HL at Full Load
20MHz bandwidth
(Measured with a 0.1µF/50V MLCC)
See table
±0.02% / ºC, max.
Temperature coefficient
Transient response recovery time
25% load step change
1.5VDC output
1.8VDC output
2.5VDC output
Over voltage protection
3.3VDC output
Zener diode clamp
5VDC output
12VDC output
15VDC output
Over load protection
% of FL at nominal input
Short circuit protection
300µs
3.9VDC
3.9VDC
3.9VDC
3.9VDC
6.2VDC
15VDC
18VDC
150%, max.
Continuous, automatics recovery
Efficiency
Isolation resistance
See table
Input to Output
Input (Output) to Case
500VDC
Isolation capacitance
Safety approvals
1600VDC, min. 1minute
1600VDC, min. 1minute
9
10 ohms, min.
1000pF, max.
Switching frequency
300kHz±10%.
IEC60950-1, UL60950-1, & EN60950-1
Case material
Nickel-coated copper
Base material
FR4 PCB
Potting material
Epoxy (UL94 V-0)
2.00 X 1.60 X 0.40 Inch
(50.8 X 40.6 X 10.2 mm)
Dimensions
Weight
MTBF (Note 1)
Page 1 of 3
48g (1.69oz)
MIL-HDBK-217F
12VDC nominal input
24VDC nominal input
48VDC nominal input
9 ~ 18VDC
18 ~ 36VDC
36 ~ 75VDC
L-C type
36VDC 100ms,max
50VDC 100ms,max
100VDC 100ms,max
30mAp-p
Power up
25mS
Remote ON/OFF
25mS
9VDC
17.8VDC
36VDC
8VDC
16VDC
33VDC
Input filter
12VDC input
24VDC input
48VDC input
Input reflected ripple current
Nominal input and
Start up time
constant resistive load
12VDC input
Start-up voltage
24VDC input
48VDC input
12VDC input
Shutdown voltage
24VDC input
48VDC input
Remote ON/OFF (Note 6)
(Positive logic)
DC-DC ON
Open or 3.0V < Vr < 12V
DC-DC OFF
Short or 0V < Vr < 1.2V
Input current of remote control pin Nominal input
-0.5mA ~ 0.5mA
2.5mA
Remote off state input current
Nominal input
Input surge voltage
ENVIRONMENTAL SPECIFICATIONS
Operating ambient temperature
Maximum case temperature
Storage temperature range
GENERAL SPECIFICATIONS
Isolation voltage
Input voltage range
-40ºC ~ +85ºC (with derating)
100ºC
-55ºC ~ +125ºC
Over temperature protection
115ºC
Thermal impedance
Natural convection
10ºC/Watt
(Note 7)
Natural convection with heat-sink 8.24ºC/Watt
Thermal shock
MIL-STD-810F
Vibration
MIL-STD-810F
Relative humidity
5% to 95% RH
EMC CHARACTERISTICS
EMI (Note 8)
EN55022
ESD
EN61000-4-2
Radiated immunity
Class A, Class B
Air ± 8kV
Perf. Criteria B
Contact ± 6kV
EN61000-4-3
10 V/m Perf. Criteria A
Fast transient (Note 9) EN61000-4-4
± 2kV Perf. Criteria B
Surge (Note 9)
EN61000-4-5
± 1kV Perf. Criteria B
Conducted immunity
EN61000-4-6
10 Vr.m.s Perf. Criteria A
1.283 x 106 hrs
www.pduke.com
2014/4/30
FEC30 SERIES
30 WATTS
Model
Number
Input
Range
Output
Voltage
FEC30-12S1P5
FEC30-12S1P8
FEC30-12S2P5
FEC30-12S3P3
FEC30-12S05
FEC30-12S12
FEC30-12S15
FEC30-12D12
FEC30-12D15
FEC30-24S1P5
FEC30-24S1P8
FEC30-24S2P5
FEC30-24S3P3
FEC30-24S05
FEC30-24S12
FEC30-24S15
FEC30-24D12
FEC30-24D15
FEC30-48S1P5
FEC30-48S1P8
FEC30-48S2P5
FEC30-48S3P3
FEC30-48S05
FEC30-48S12
FEC30-48S15
FEC30-48D12
FEC30-48D15
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
9 ~ 18 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
18 ~ 36 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
36 ~ 75 VDC
1.5 VDC
1.8 VDC
2.5 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
±12 VDC
±15 VDC
1.5 VDC
1.8 VDC
2.5 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
±12 VDC
±15 VDC
1.5 VDC
1.8 VDC
2.5 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
±12 VDC
±15 VDC
Output Current
Min. load Full load
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
6000mA
6000mA
6000mA
6000mA
6000mA
2500mA
2000mA
±1250mA
±1000mA
6000mA
6000mA
6000mA
6000mA
6000mA
2500mA
2000mA
±1250mA
±1000mA
6000mA
6000mA
6000mA
6000mA
6000mA
2500mA
2000mA
±1250mA
±1000mA
DC-DC CONVERTER
(2)
(3)
(4)
Output
No load
Ripple & Noise Input Current
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
100mVp-p
100mVp-p
(5)
Eff
(%)
100mA
100mA
110mA
115mA
95mA
170mA
210mA
60mA
40mA
50mA
35mA
45mA
50mA
50mA
80mA
90mA
30mA
30mA
20mA
20mA
25mA
30mA
35mA
35mA
55mA
20mA
20mA
Capacitor
Load max
78
81
83
85
87
88
88
87
87
80
82
84
86
88
89
89
88
88
81
83
85
87
89
90
90
88
88
85800µF
65000µF
33000µF
19500µF
10200µF
3240µF
1100µF
±1020µF
±675µF
85800µF
65000µF
33000µF
19500µF
10200µF
3300µF
1100µF
±1020µF
±675µF
85800µF
65000µF
33000µF
19500µF
10200µF
3300µF
1100µF
±1020µF
±675µF
Note
1. MIL-HDBK-217F @Ta=25 ºC, Full load.
2. Typical value at nominal input and full load. (20MHZ BW.)
3. Typical value at nominal input and no load.
4. Typical value at nominal input and full load.
5. Test by minimum input and constant resistive load.
6. The CTRL pin voltage is referenced to -INPUT.
7. Heat-sink is optional and P/N: 7G-0011C-F.
8. The FEC30 series standard module meets EN55022 Class A and Class B with external components.
For more detail information, please contact with P-DUKE.
9. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V.
FEC30-48S05 Derating Curve
120
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
0
20
62.9
40
60
80
100
120
-40
AMBIENT TEMPERATURE(℃)
FEC30-48S05
Efficiency VS Input Voltage
90
88
86
84
82
80
36
40
44
48
52
56
60
64
68
95
90
85
80
75
70
65
60
55
50
45
0
20
40
60
69.4
80
100
120
FEC30-48S05
Efficiency VS Output Load
10
72
20
30
40
50
60
70
80
90
100
OUTPUT LOAD (% of Full Load)
INPUT VOLTAGE (V)
Page 2 of 3
-20
AMBIENT TEMPERATURE(℃ )
E F F IC IE N C Y (% )
EFFIC IEN C Y(% )
92
FEC30-48S05 (Note
Derating
7) Curve
With Heatsink (Note 4 )
120
O U T P U T P O W E R (% )
O U T P U T P O W E R (% )
CAUTION: This power module is not internally fused. An input line fuse must always be used.
www.pduke.com
2014/4/30
FEC30 SERIES
30 WATTS
DC-DC CONVERTER
MECHANICAL DRAWING
1. All dimensions in Inch (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
X.XXX±0.01 (X.XX±0.25)
2. Pin pitch tolerance ±0.01 (0.25)
3. Pin dimension tolerance ±0.004 (0.1)
PIN CONNECTION
EXTERNAL OUTPUT TRIMMING
PIN
SINGLE
DUAL
1
2
4
5
6
7
8
+ INPUT
- INPUT
CTRL
NO PIN
+ OUTPUT
- OUTPUT
TRIM
+ INPUT
- INPUT
CTRL
+ OUTPUT
COMMON
- OUTPUT
TRIM
Page 3 of 3
Output can be externally trimmed by using the method
shown below. ( ) for dual output trim
TRIM UP
TRIM DOWN
7(7)
8(8)
RU
8(8)
www.pduke.com
RD
6(5)
2014/4/30
Similar pages