10Base-T NIC Module with Enhanced CMA and Resistor Network ELECTRONICS INC. EPE6167G & EPE6167G-RC • Optimized for DP83902, 905, 907, 932 PHY Chips • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25° C Cut-off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) ± 1.0 MHz 1-10 MHz 5-10 MHz Attenuation (dB Min.) (1) @ 20 MHz @ 25 MHz Common Mode Rejection (dB Min.) @ 30 MHz @ 40 MHz @ 30-100 MHz Crosstalk (dB Min.) @ 200 MHz Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv 17 17 -1 -1 -15 -15 -7 -5 -18 -11 -30 -18 -35 -26 -30 -30 -30 -30 @ 1-10 MHz -35 • Isolation : 1500 Vrms • Characteristic Filter Impedance : 100 Ω • • Note: 1) Referenced to the filter output @ 5 MHz for filter only, excluding resistor network. • Package Schematic .100 (2.54) .100 (2.54) Transmit Channel 274Ω TXd- 1 .900 (22.86) 66.5Ω TX+ 2 8 Td+ 806Ω Pin 1 I.D. PCA EPE6167G(-RC) Date Code .370 (9.40) .540 (13.72) Pad Layout TX- 3 .100 (2.54) 6 Td7 1:1 66.5Ω TXd+ 4 274Ω 5 Chip Side .040 (1.02) .700 (17.78) .005/.015 (.127/.381) .370 (9.40) Cable Side Receive Channel RX+ 14 .008/.012 (.203/.305) 0°-8° 49.9Ω .035 (.889) .016/.022 (.406/.559) LPF LPF 15 .500 (12.70) .100 (2.54) 11 Rd+ 49.9Ω 1:1 RX- 16 10 12 Chip Side Notes : EPE6167G 1. Assembly Process (Solder Composition) SnPb 9 Rd- Cable Side EPE6167G-RC Pb-Free + (RoHS exemption 7a) 2. Peak Solder Rating 225°C (per IPC/JEDEC J-STD-020C) 3. Moisture Sensitive Levels (MSL) MSL = 3 (168 Hours, ≤30°C/60%RH) (per IPC/JEDEC J-STD-020C) 4. Weight 5. Packaging Information (*Add “TR” to end of part number when placing order) (Tube) (Tape & Reel) 260°C MSL = 4 (72 Hours, ≤30°C/60%RH) TBD grams TBD grams 19 pieces/tube 300 pieces/13” reel 19 pieces/tube 300 pieces/13” reel (*EPE6167G-TR) (*EPE6167G-RCTR) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6167G & -RC Rev. 8 10/6/05 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com