LL4154-M www.vishay.com Vishay Semiconductors Small Signal Fast Switching Diode FEATURES • Silicon epitaxial planar diodes • Electrical data identical with the device 1N4154 • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Extreme fast switches MECHANICAL DATA Case: MiniMELF SOD-80 Weight: approx. 31 mg Cathode band color: black Packaging codes/options: 18/10K per 13" reel (8 mm tape), 10K/box 08/2.5K per 7" reel (8 mm tape), 12.5/K box PARTS TABLE PART LL4154-M ORDERING CODE TYPE MARKING INTERNAL CONSTRUCTION REMARKS LL4154-M-18 or LL4154-M-08 - Single diode Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Repetitive peak reverse voltage Reverse voltage Peak forward surge current tp = 1 μs Repetitive peak forward current Forward continuous current Average forward current VR = 0 Power dissipation SYMBOL VALUE UNIT VRRM 35 V VR 25 V IFSM 2 A IFRM 500 mA IF 300 mA IF(AV) 150 mA Ptot 500 mW THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature Storage temperature range TEST CONDITION SYMBOL VALUE UNIT On PC board 50 mm x 50 mm x 1.6 mm RthJA 500 K/W Tj 175 °C Tstg -65 to +175 °C Rev. 1.0, 02-Mar-15 Document Number: 85907 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LL4154-M www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL IF = 30 mA VF 1 V VR = 25 V IR 100 nA VR = 25 V, Tj = 150 °C IR 100 μA Breakdown voltage IR = 5 μA, tp/T = 0.01, tp = 0.3 ms V(BR) Diode capacitance VR = 0, f = 1 MHz, VHF = 50 mV CD 4 pF IF = IR = 10 mA, iR = 1 mA trr 4 ns IF = 10 mA, VR = 6 V, iR = 0.1 x IR, RL = 100 trr 2 ns Forward voltage Reverse current Reverse recovery time MIN. TYP. MAX. UNIT 35 V TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 3.0 100 C D - Diode Capacitance (pF) I R - Reverse Current (µA) Scattering Limit 10 1 0.1 VR = 25 V 0.01 0 40 80 120 160 f = 1 MHz Tj = 25 °C 2.0 1.5 1.0 0.5 0 200 Tj - Junction Temperature (°C) 94 9154 2.5 0.1 94 9156 Fig. 1 - Reverse Current vs. Junction Temperature 1 10 100 V R - Reverse Voltage (V) Fig. 3 - Diode Capacitance vs. Reverse Voltage I F - Forward Current (mA) 1000 Tj = 100 °C 100 10 Tj = 25 °C 1 0.1 0 94 9152 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Fig. 2 - Forward Current vs. Forward Voltage Rev. 1.0, 02-Mar-15 Document Number: 85907 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LL4154-M www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indentification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side 2.5 (0.098) max. 1.25 (0.49) min. 2 (0.079) min. Foot print recommendation: Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 5 (0.197) ref. 96 12070 Rev. 1.0, 02-Mar-15 Document Number: 85907 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000