Tripp LS604WM 600w 120v wall-mount power conditioner Datasheet

600W 120V Wall-Mount Power Conditioner with
Automatic Voltage Regulation (AVR), AC Surge
Protection, 4 Outlets
Highlights
Ideal for computers, routers,
modems and home theater
components
Corrects under- and overvoltages
MODEL NUMBER: LS604WM
in 87V–140V range
Protects against spikes with 720
joules of surge suppression
Mounts to the wall using included
hardware
Features 4 NEMA 5-15R rear
outlets
Package Includes
LS604WM 600W 120V Power
Conditioner
Mounting hardware
Owner’s Manual
Description
The LS604WM 600W 120V Power Conditioner adjusts under- and overvoltages to provide safe, computer-grade AC power that meets ANSI C84.1
specifications. Built-in automatic voltage regulation (AVR) corrects undervoltages as low as 87V and overvoltages as high as 140V back to regulated 120V
nominal power. Providing optimum voltage conditions not only extends the life of your equipment, but also keeps your equipment working through brownouts
and prolonged overvoltage conditions.
A network-grade 720-joule surge suppression rating conforms to the IEEE-587 standard for surge suppression and prevents spikes from inflicting damage, data
loss or corruption and audio/video performance problems on your connected equipment. EMI/RFI noise filtering protects your AC line from disruptive
electromagnetic and radio interference.
Just connect the NEMA 5-15P plug with 6-foot cord to an AC power source, and plug up to four devices into the rear NEMA 5-15R outlets. A front-panel LED
lets you know your equipment is protected. Secure the LS604WM’s all-metal case to a wall or other surface using the built-in mounting tabs and included
screws.
Features
Protects Valuable Electronics
Rated at 120V/600W/5A
Ideal for computers, routers, modems, printers, home theater components and point-of-sale equipment
Connect up to 4 electronic devices to the rear NEMA 5-15R outlets
All-metal case with mounting tabs attaches to wall or other surface using included screws
Automatic Voltage Regulation (AVR)
Monitors incoming AC power and keeps equipment working through brownouts and prolonged overvoltage conditions
Corrects undervoltages as low as 87V and overvoltages as high as 140V
1/3
AC Line Surge Suppression
720 joules of network-grade surge suppression protects against potentially harmful power surges and spikes
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage your equipment’s performance
Built-In Diagnostics
Front-panel LED indicates your components are protected
Lighted on/off switch provides one-touch power control over all components
Specifications
OUTPUT
Nominal Output Voltage(s)
Supported
120V
Output Receptacles
(4) 5-15R
Output (VA)
600
Output (Watts)
600
INPUT
Input Cord Length (ft.)
6
Input Cord Length (m)
1.83
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs
1 LED shows if surge suppression is intact
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating
720
EMI / RFI AC Noise Suppression
20 dB
PHYSICAL
Shipping Weight (lbs.)
12.00
Shipping Weight (kg)
5.44
Unit Dimensions (hwd / in.)
4 x 5 x 5.75
Unit Dimensions (hwd / cm)
10.16 x 12.7 x 14.61
Material of Construction
Steel
Form Factors Supported
Short tower format with keyhole slots for wall-mount applications
WARRANTY
2/3
Product Warranty Period (Worldwide)
2-year limited warranty
Connected Equipment Insurance
(U.S., Canada & Puerto Rico)
$10,000 Ultimate Lifetime Insurance
© 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
https://www.tripplite.com/products/product-certification-agencies
3/3
Similar pages