March 6, 2007 SMD INDUCTOR DR365-1 SERIES Features z z z z Low Profile Surface Mount Design Inductance Range from 3.3µH to 100µH Temperature Range -40°C to +85°C Tinned Leads with Leaded Solder is Available (note 4) ELECTRICAL SPECIFICATION AT 25°C Inductance (µH ) @ 100kHz, 0.1V Part Number DR365-1-332 DR365-1-472 DR365-1-682 DR365-1-103 DR365-1-153 DR365-1-223 DR365-1-333 DR365-1-473 DR365-1-683 DR365-1-104 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% ± 20% DCR (Ω) Max. 0.11 0.16 0.22 0.28 0.44 0.67 0.98 1.38 1.70 2.80 Rated DC Current (A) Max. 0.94 0.80 0.65 0.53 0.40 0.36 0.32 0.26 0.23 0.20 Schematic A A A A A B B B B B MECHANICAL OUTLINES 1 .236 6,00 4 4 XXX 2 1 .291 MAX. 7,40 .024 0,60 3 .177 4,50 .047 MAX. 1,20 .228 MAX. 5,80 3 2 .165 4,20 .142 3,60 1 .134 3,40 .055 1,40 SUGGESTED PAD LAYOUT 2 .043 1,10 SCHEMATIC "A" 4 1 3 2 SCHEMATIC "B" NOTES: 1. Dimensions are shown in inches/millimeters Unless otherwise specified, tolerance = Inches: ±0.010 = Millimeters: ±0,25 2. Inductance is approximately 10% lower @ rated DC current from initial value 3. Tape & Reel Packaging, 2000 pieces per reel. 4. For non-RoHS parts replace DR prefix with 42- (e.g. DR365-1 becomes 42-365-1) 5. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C. DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.