7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 3 2 20 LOC ALL RIGHTS RESERVED. BY - 4 1 2 D GP MATERIAL: CAGE ASSEMBLY: 0.25mm THICK NICKEL SILVER ALLOY EMI SPRINGS: COPPER ALLOY HEAT SINK: ALUMINUM HEAT SINK CLIP: STAINLESS STEEL. FINISH: HEAT SINK: ELECTROLESS NICKEL HEAT SINK CLIP: PASSIVATE. EMI SPRINGS: 0.8µm MIN MATTE TIN OVER 0.8µm MIN NICKEL, NON-PLATED EDGES PERMISSIBLE. 3 DATUM AND BASIC DIMENSIONS ESTABLISHED BY CUSTOMER. 5 PADS AND VIAS CHASSIS GROUND. 1 REVISIONS DIST 00 P LTR DESCRIPTION DATE DWN APVD A RELEASED PER ECO-12-013192 27SEP2012 BMM MRS A1 RELEASED PER ECO-13-014600 12SEP2013 PP SH A2 RELEASED PER ECO-14-008488 06MAY2014 PP SH 12. PRODUCT COMPLIES WITH SPECIFICATION SFF-8433 IMPROVED PLUGGABLE FORM FACTOR FOR SFP+ GANGED CAGES. 13 DIMENSION APPLIES PRIOR TO INSERTION OF SFP MODULE. D 5. MATES WITH SFP MSA COMPLIANT RECIEVERS. 2198230-1,2,3,4 FINISHED ASSEMBLY WITH PIN TYPE HEAT SINK 6. INTERPRETATION OF DATUM REFERENCE FRAME IN ACCORDANCE WITH SECT 4.4.1.1 OR ASME Y14.5M-1994. 2198230-5,6,7,8 FINISHED ASSEMBLY WITH FIN TYPE HEAT SINK 2X 14 0.1 PORT OPENING 7 MINIMUM PC BOARD THICKNESS: SINGLE SIDED: 1.5mm DOUBLE SIDED: 2.25mm 8 HOLE PATTERN REPEATS FOR EACH PORT, SPACING BETWEEN PORTS IS 14.25mm. 9 REFERENCE APPLICATION SPEC. 114-13120, HOLE A, FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 10 REFERENCE APPLICATION SPEC. 114-13120, HOLE B, FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 11. CERTAIN MATING TRANCEIVERS MAY REQUIRE ADDITIONAL PCB THICKNESS THAT WOULD NEED TO BE DETERMINED BY THE CUSTOMER. C C 13 A MAX 2X 8.95 0.15 PORT OPENING ( 9.7 ) 11X ( 2.05 ) ( 7.125 ) ( 48.7 ) ( 14.25 ) ( 28.75 ) B APPROXIMATE LOCATION OF DATE CODE FIN TYPE 22.5 FIN TYPE 15.5 FIN TYPE FIN TYPE PC BOARD A 2198230-1 MOUNTED BELLY TO BELLY SCALE 5:1 DIMENSIONS: mm HEAT SINK A 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES MATERIAL 0.13 0.1 0.08 .05 .05 FINISH 1 2 SAN 2198230-2 13.2 PCI 06OCT2011 APVD 06OCT2011 M. SCHMITT 108-2364 APPLICATION SPEC 114-13120 WEIGHT 2198230-1 PART NUMBER 06OCT2011 CHK M. SCHMITT 2198230-3 DESCRIPTION 13 C. VALENTINE 2198230-5 2198230-4 NETWORKING, SHORT DWN 2198230-7 NETWORKING, TALL 18.1 PRODUCT SPEC 1 2198230-6 PCI 15.5 TOLERANCES UNLESS OTHERWISE SPECIFIED: SAN 13.2 PIN TYPE THIS DRAWING IS A CONTROLLED DOCUMENT. 2198230-8 NETWORKING, SHORT 22.5 PIN TYPE NETWORKING, TALL 18.1 PIN TYPE PIN TYPE 4805 (3/11) B - Customer Drawing A TE Connectivity NAME SFP+ ENHANCED 1X2 CAGE ASSEMBLY, PRESS-FIT, EMI SPRINGS, HEAT SINK SIZE CAGE CODE A1 00779 DRAWING NO 2198230 SCALE 6:1 SHEET 1 RESTRICTED TO OF - 4 REV A2 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 20 LOC GP ALL RIGHTS RESERVED. 1 REVISIONS DIST 00 P LTR - 34.25 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - MIN ( 39.4 ) GUIDE PINS 8X R 0.3 MAX D D 2X 10.4 +0.10 -0.14 TOP OF PCB TO INSIDE OF BEZEL CUTOUT 0.23 ( 1.5 ) MIN PCB THICKNESS ( 35.4 ) 7 2X 29.7 C C 2198230-1 MOUNTED ON PC BOARD SHOWN THRU RECOMMENDED BEZEL RECOMMENDED BEZEL CUT-OUT SINGLE SIDED APPLICATIONS SCALE 4:1 ( 39.4 ) 2X 29.7 GUIDE PINS 2X 10.4 B 12.19 B +0.10 -0.14 TOP OF PCB TO INSIDE OF BEZEL CUT-OUT 0.23 ( 2.25 ) MIN PCB THICKNESS 7 8X R 0.3 MAX ( 35.4 ) A RECOMMENDED BEZEL CUT-OUT BELLY TO BELLY APPLICATIONS 2198230-1 MOUNTED BELLY TO BELLY ON PC BOARD SHOWN THRU RECOMMENDED BEZEL A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.13 0.1 0.08 .05 .05 DWN 06OCT2011 CHK 06OCT2011 APVD 06OCT2011 C. VALENTINE M. SCHMITT M. SCHMITT PRODUCT SPEC 108-2364 APPLICATION SPEC 1 114-13120 WEIGHT - Customer Drawing 4805 (3/11) TE Connectivity NAME SFP+ ENHANCED 1X2 CAGE ASSEMBLY, PRESS-FIT, EMI SPRINGS, HEAT SINK SIZE CAGE CODE A1 00779 DRAWING NO 2198230 SCALE 6:1 SHEET 2 RESTRICTED TO OF - 4 REV A2 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 20 LOC 11.925 8 2X 7.125 8 2X 2.325 1 REVISIONS DIST GP ALL RIGHTS RESERVED. BY - 00 P LTR DESCRIPTION 2X 6.5 DATE SEE SHEET 1 - 2X 12.25 8 DWN APVD - - - 4X 2.875 3X 2 THIS AREA DENOTES COMPONENT KEEP-OUT (TRACES ALLOWED) D 2 20X 12X ( 0.95 ) 5 0.5 20X 10 2 0.03 18X 0.8 1.4 0.05 D PLATING REQUIRED 1.55 4X 4.1 0.05 F SEE DETAIL D 1.55 4X 4.1 0.05 E 1 4X 32.1 ( 9.6 ) 2X 30 C DETAIL F SCALE 10:1 27.5 C 4X 25.9 22.5 3X 42.3 2X 20 2X 17.8 1.1 CROSS-HATCHED AREA DENOTES EXPOSED CHASSIS GROUND 4X 41.3 15 2X 10 2X 26.8 5 2X 2X 21.6 B B 2X 12.05 2X 5 G DETAIL SCALE 10:1 9.5 MAX 2.5 MIN A ( 1.05 ) PLATING REQUIRED 5 9 3 A BCS C SEE DETAIL G 5 1 14X o2 1 4X 6X ( 1.05 ) 5 9 PLATING REQUIRED 14.25 5X A 28.5 THIS DRAWING IS A CONTROLLED DOCUMENT. 3 B RECOMMENDED PCB CONFIGURATION WITH KEEP-OUT AREAS SINGLE SIDED APPLICATIONS SCALE 8:1 7 CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) DIMENSIONS: mm MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.13 0.1 0.08 .05 .05 DWN 06OCT2011 CHK 06OCT2011 APVD 06OCT2011 C. VALENTINE M. SCHMITT M. SCHMITT PRODUCT SPEC 108-2364 APPLICATION SPEC 1 114-13120 WEIGHT - Customer Drawing 4805 (3/11) TE Connectivity NAME SFP+ ENHANCED 1X2 CAGE ASSEMBLY, PRESS-FIT, EMI SPRINGS, HEAT SINK SIZE CAGE CODE A1 00779 DRAWING NO 2198230 SCALE 6:1 SHEET 3 RESTRICTED TO OF - 4 REV A2 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC BY - REVISIONS DIST GP ALL RIGHTS RESERVED. 1 00 P LTR - 2X 8 8 2X 2X 11.925 DATE SEE SHEET 1 DWN - - 7.125 2X 6.5 20X 4X 2.875 2.325 3X 2 0.5 - 0.03 18X 16X ( 0.95 ) 0.8 1.4 10 5 20X PLATING REQUIRED 2 0.05 D 1.55 4X 4.1 0.05 D 1.55 H SEE DETAIL 4X 4.1 0.05 E 6X 32.1 1 3X 30 C APVD 2X 12.25 8 THIS AREA DENOTES COMPOENT KEEP-OUT (TRACES ALLOWED) D DESCRIPTION ( 9.6 ) 2X 27.5 4X 25.9 C DETAIL H SCALE 10:1 2X 22.5 3X 42.3 3X 20 2X 17.8 1.1 CROSS-HATCHED AREA DENOTES EXPOSED CHASSIS GROUND 4X 41.3 2X 15 3X 10 2X 26.8 2X 5 2X 2 2X 21.6 B B 2X 12.05 3X 5 J DETAIL SCALE 10:1 9.5 MAX 2.5 MIN A ( 1.05 ) PLATING REQUIRED 5 9 SEE DETAIL C BCS 3 B 5 1 3 A J 14X 13X ( o2 1 10X 14.25 10X 28.5 RECOMMENDED PCB CONFIGURATION WITH KEEP-OUT AREAS BELLY TO BELLY APPLICATIONS SCALE 8:1 7 1.05 ) 5 9 PLATING REQUIRED CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.13 0.1 0.08 .05 .05 DWN 06OCT2011 CHK 06OCT2011 APVD 06OCT2011 C. VALENTINE M. SCHMITT M. SCHMITT PRODUCT SPEC 108-2364 APPLICATION SPEC 1 114-13120 WEIGHT - Customer Drawing 4805 (3/11) TE Connectivity NAME SFP+ ENHANCED 1X2 CAGE ASSEMBLY, PRESS-FIT, EMI SPRINGS, HEAT SINK SIZE CAGE CODE A1 00779 DRAWING NO 2198230 SCALE 6:1 SHEET 4 RESTRICTED TO OF - 4 REV A2