T-13/4 Super Ultra-Bright LED Lamps Technical Data Features Applications • Very High Intensity • Exceptional Uniformity • Microtint Lens for Color Identification • Consistent Viewability All Colors: AlGaAs Red High Efficiency Red Yellow Orange Green Emerald Green • 15° and 25° Family • Tape and Reel Options Available • Binned for Color and Intensity • Ideal for Backlighting Front Panels* • Used for Lighting Switches • Adapted for Indoor and Outdoor Signs HLMP-C116 HLMP-C115 HLMP-C215 HLMP-C315 HLMP-C415 HLMP-C515 HLMP-C615 HLMP-C124 HLMP-C123 HLMP-C223 HLMP-C323 HLMP-C423 HLMP-C523 HLMP-C623 Description These non-diffused lamps are designed to produce a bright light source and smooth radiation pattern. A slight tint is added to the lens for easy color identification. This lamp has been designed with a 20 mil lead frame, enhanced flange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment. Device Selection Guide LED Color TS AlGaAs DH AS AlGaAs High Efficiency Red Yellow Orange High Performance Green Emerald Green Note: 1. Refer to page 3 for typical values. Part Number HLMP-C116 HLMP-C124 HLMP-C115 HLMP-C123 HLMP-C215 HLMP-C223 HLMP-C315 HLMP-C323 HLMP-C415 HLMP-C423 HLMP-C515 HLMP-C523 HLMP-C615 HLMP-C623 Typical Luminous Intensity (mcd @ 20 mA) 2000 1000 600 200 300 170 300 170 300 170 300 170 45 27 Viewing Angle Family[1] 15° 25° 15° 25° 15° 25° 15° 25° 15° 25° 15° 25° 15° 25° 2 Package Dimensions 5.00 ± 0.20 (NOTE 1) (0.197 ± 0.008) 8.71 ± 0.20 (0.343 ± 0.008) 1.14 ± 0.20 (0.045 ± 0.008) 0.70 (0.028) MAX. 1.85 (0.073) MAX. 31.60 MIN. (1.244) CATHODE LEAD 1.00 MIN. (0.039) 0.50 ± 0.10 SQ. TYP. (0.020 ± 0.004) 5.80 ± 0.20 (0.228 ± 0.008) CATHODE FLAT 2.54 ± 0.38 (0.100 ± 0.015) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. LEADS ARE MILD STEEL, SOLDER DIPPED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT 0.5 mm (0.020 in.) DOWN THE LEADS. Absolute Maximum Ratings at TA = 25°C Parameter DC Forward Current[1] Transient Forward Current[2] (10 µsec Pulse) Reverse Voltage (Ir = 100 µA) LED Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] TS AlGaAs Red 50 500 High Efficiency Red and Orange 30 500 DH AS AlGaAs Red 30 500 5 5 110 110 -55 to +100 -20 to +100 Yellow 20 500 5 5 110 110 -55 to +100 -55 to +100 260 °C for 5 seconds High Performance Green and Emerald Green 30 500 5 110 -20 to +100 Units mA mA V °C °C °C Notes: 1. See Figure 5 for maximum current derating vs. ambient temperature. 2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond. 3 Electrical Characteristics at TA = 25°C Part Number HLMP-C116 HLMP-C124 HLMP-C115 HLMP-C123 HLMP-C215 HLMP-C223 HLMP-C315 HLMP-C323 HLMP-C415 HLMP-C423 HLMP-C515 HLMP-C523 HLMP-C615 HLMP-C623 Forward Voltage Vf (Volts) @ If = 20 mA Typ. Max. 1.9 2.4 Reverse Breakdown Vr (Volts) @ Ir = 100 µA Min. 5 Capacitance C (pF) Vf = 0 f = 1 MHz Typ. 20 Thermal Resistance RθJ-PIN (°C/W) 210 Speed of Response τs (ns) Time Constant e-t/τs Typ. 45 1.8 2.2 5 30 210 30 1.9 2.6 5 11 210 90 2.1 2.6 5 15 210 90 1.9 2.6 5 4 210 280 2.2 3.0 5 18 210 260 2.2 3.0 5 18 210 260 Optical Characteristics at TA = 25°C Part Number HLMP-C116 HLMP-C124 HLMP-C115 HLMP-C123 HLMP-C215 HLMP-C223 HLMP-C315 HLMP-C323 HLMP-C415 HLMP-C423 HLMP-C515 HLMP-C523 HLMP-C615 HLMP-C623 Luminous Intensity Iv (mcd) @ 20 mA[1] Min. Typ. 500 2000 290 1000 290 600 90 200 138 300 90 170 146 300 96 170 138 300 90 170 170 300 69 170 17 45 6 27 Peak Wavelength λpeak (nm) Typ. 654 Color, Dominant Wavelength λd[2] (nm) Typ. 644 645 637 635 626 583 585 600 602 568 570 558 560 Viewing Angle 2θ1/2 (Degrees)[3] Typ. 14 20 11 26 17 23 17 25 17 23 20 28 20 28 Luminous Efficacy ηv (lm/w) 85 80 145 500 380 595 656 Notes: 1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity. 4 1.0 ORANGE EMERALD GREEN TA = 25° C TS AlGaAs RED RELATIVE INTENSITY DH As AlGaAs RED HIGH PERFORMANCE GREEN HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 700 750 WAVELENGTH – nm Figure 1. Relative Intensity vs. Wavelength. HIGH EFFICIENCY RED, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN 100.0 100 DH As AlGaAs RED 50.0 IF – FORWARD CURRENT – mA IF – FORWARD CURRENT – mA 300.0 200.0 TS AlGaAs RED 20.0 10.0 5.0 2.0 1.0 0.5 0.2 0.1 0 0.5 1.5 1.0 2.0 2.5 3.0 3.5 HIGH PERFORMANCE GREEN, EMERALD GREEN 80 HIGH EFFICIENCY RED/ORANGE 60 YELLOW 40 20 0 1.0 0 2.0 3.0 4.0 5.0 VF – FORWARD VOLTAGE – V VF – FORWARD VOLTAGE – V Figure 2. Forward Current vs. Forward Voltage (Non-resistor Lamp). HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN 1.6 2.0 DH As AlGaAs RED 1.0 0.5 0.2 TS AlGaAs RED 0.1 0.05 0.02 0.01 0.1 0.2 0.5 1 2 5 10 20 30 50 IF – DC FORWARD CURRENT – mA RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 5.0 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 IDC – DC CURRENT PER LED – mA Figure 3. Relative Luminous Intensity vs. Forward Current. 30 5 DH As AlGaAs RED HER, ORANGE, YELLOW, HIGH PERFORMANCE GREEN, EMERALD GREEN 1.3 TS AlGaAs RED 0.8 0.6 0.4 0.2 0 0 10 50 20 100 200 300 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1 IPEAK – PEAK FORWARD CURRENT – mA ηPEAK – RELATIVE EFFICIENCY (NORMALIZED AT 20 mA) 1.0 RELATIVE EFFICIENCY (NORMALIZED AT 20 mA) RELATIVE EFFICIENCY (NORMALIZED AT 20 mA) 1.2 2 5 10 20 1.1 HIGH EFFICIENCY RED/ORANGE 1.0 0.9 HIGH PERFORMANCE GREEN 0.8 0.7 0.6 0.5 0.4 50 100 200 300 EMERALD GREEN YELLOW 1.2 0 10 20 30 40 50 60 70 80 90 IPEAK – PEAK FORWARD CURRENT – mA IPEAK – PEAK FORWARD CURRENT – mA Figure 4. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. HER, ORANGE, YELLOW, AND HIGH PERFORMANCE GREEN, EMERALD GREEN 40 TS AlGaAs RED DH As AlGaAs RED 35 30 25 RθJA = 559° C/W 20 RθJA = 689° C/W 15 10 5 0 0 20 40 60 80 50 40 RθJA = 400° C/W 30 RθJA = 550° C/W 20 10 0 100 TA – AMBIENT TEMPERATURE – °C IF – FORWARD CURRENT – mA IF – FORWARD CURRENT – mA IF – FORWARD CURRENT – mA 40 30 20 25 40 55 60 80 100 TA – AMBIENT TEMPERATURE – °C RθJA = 470° C/W 25 RθJA = 300° C/W 20 YELLOW 15 10 RθJA = 705° C/W 5 0 0 HER, ORANGE, GREEN, EMERALD GREEN 35 0 20 40 NORMALIZED LUMINOUS INTENSITY Figure 5. Maximum Forward dc Current vs. Ambient Temperature. Derating Based on TjMAX = 110 °C 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 ANGULAR DISPLACEMENT – DEGREES Figure 6. Relative Luminous Intensity vs. Angular Displacement. 15 Degree Family. 60 80 100 TA – AMBIENT TEMPERATURE – °C NORMALIZED LUMINOUS INTENSITY 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 ANGULAR DISPLACEMENT – DEGREES Figure 7. Relative Luminous Intensity vs. Angular Displacement. 25 Degree Family. For technical assistance or the location of your nearest Hewlett-Packard sales office, distributor or representative call: Americas/Canada: 1-800-235-0312 or 408-654-8675 Far East/Australasia: Call your local HP sales office. Japan: (81 3) 3335-8152 Europe: Call your local HP sales office. Data subject to change. Copyright © 1996 Hewlett-Packard Co. Obsoletes 5965-4812E (9/96) Printed in U.S.A. 5965-6165E (11/96)