COMMUNICATIONS TEST & MEASUREMENT Benchtop Erbium-Doped Fiber Amplifier EDFA Series Key Features • Choice of wavelengths C- or L- bands • High output power and gain • Mid-span access • Compact benchtop design with rackmount kit • Single channel and multichannel dense wavelength division multiplexing (DWDM) capabilities • RS-232 remote control Applications • Pre-amp booster, in-line amplifier emulation • Dense wavelength division multiplexing (DWDM) transmission, for multichannel applications • SONET/SDH systems, for single channel applications Safety Information Complies to CE requirements plus UL3101-1 and CAN/CSA-C22.2 No. 1010.1 Meets the requirements of Class 3B in standard IEC 60825-1(2002) and complies with 21CFR1040.10 except deviations per Laser Notice No. 50, July 2001. WEBSITE : www.jdsu.com The Benchtop Erbium-Doped Fiber Amplifier (EDFA) amplifies optical signals across the EDFA window (1528 to 1610 nm). Through optimization of amplifier gain, noise figure, and saturated output power, the EDFA will expand your test capabilities in systems, components or sub-assembly manufacturing as well as research and development (R&D) environments. The amplifier incorporates a unique design to produce maximum signal gain and saturated output power in the 1550 and 1590 nm test bands while minimizing noise figure. It features a user-friendly front panel housing an LCD displaying input/output power, current control and an optical interface. The amplifier is offered in C-band, L-band and C+L-band versions and pre-amplifier, booster, or in-line amplifier configurations. The Benchtop models provide specialized variants and optical performance not available in the Multiple Application Platform (MAP) line. Additional EDFA models are available in the MAP EDFA product line. BENCHTOP ERBIUM-DOPED FIBER AMPLIFIER 2 Specifications MODEL Test band Amplifier type Operating wavelength range Input signal Saturated output power 1 Noise figure 2 Small signal gain 3 Spectral gain flatness 4 Polarization dependent loss (PDL) Polarization mode dispersion (PMD) Input/output isolation Input/output monitors Input voltage Power consumption Packaging Operating temperature Storage temperature Humidity Dimensions (W x H x D) Weight OAB1552 C-band Booster high power 1528 to 1563 nm Single >24 dBm < 5.0 dB > 36 dB N/A ≤ 0.2 dB ≤ 0.45 ps 45/32 dB OAB1592 L-band Booster high power OAB1596 OAB1598 OAB1562 OAB1564 L-band L-band C+L-band C+L-band Mid-span Booster Booster In-line access DWDM DWDM 1565 to 1570 to 1570 to 1530 to 1560 nm 1610 nm 1603 nm 1603 nm 1570 to 1600 nm channel Multichannel DWDM Single Channel > 22 dBm > 20 dBm > 20 dBm > 19 dBm > 14 dBm < 5.5 dB < 5.8 dB < 5.5 dB < 6.5 dB < 6.5 dB > 29 dB > 22 dB >20 dB > 22 dB > 20 dB (MS loss ≤ 7 dB) N/A 1.7 dB 1.7 dB N/A N/A ≤ 0.3 dB ≤ 0.3 dB ≤ 0.9 dB ≤ 0.4 dB ≤ 0.4 dB ≤ 0.8 ps ≤ 0.9 ps ≤ 0.9 ps ≤ 0.7 ps ≤ 0.7 ps 40/40 dB 40/40 dB 40/40 dB 40/40 dB 40/40 dB Yes 100 to 240 V AC, 50 to 60 Hz 90 V A Maximum Half-rack benchtop and 19-inch rackmount kit 0 to 50 °C - 40 to 70 °C Maximum 95 % RH non-condensing from 0 to 45 °C 21.2 x 8.9 x 35.5 cm > 4 kg 1. Saturated Output Power measured: At 1550 nm at Pin = - 4 dBm for model 1552 At 1590 nm at Pin = 0 dBm for model 1592 and 1598 At 1590 nm at Pin = - 2 dBm for model 1596 At 1550 nm at Pin = - 4 dBm and at 1590 nm and Pin - 0 dBm for model 1562 and 1564 2. Noise figure measured: At Pin = - 4 dBm for model 1552 and 1592 At Pin = - 4 dBm for model 1596 At Pin = 0 dBm for model 1598 At Pin = - 20 dBm for model 1562 and 1564 3. Small signal gain measured: At Pin = -20 dBm for model 1552, 1562, 1564, and 1592 At Pin = -2 dBm for model 1596 At Pin = 0 dBm for model 1598 4. Flatness optimized for: At Pin = -2 dBm (1570-1603 nm) At Pin = 0 dBm (1570-1603 nm) BENCHTOP ERBIUM-DOPED FIBER AMPLIFIER Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at [email protected]. Sample: OAB1552+20FP0 + 2 OAB Code 1552 1592 1596 1598 1562 1564 Description C-band Booster high power L-band Booster high power L-band Mid-span access DWDM L-band Booster DWDM C+L-band Booster C+L-band In-Line Code FP FA SC SU Code 0 2 Connector Type FC/PC FC/APC SC/PC SC/APC Code 0 4 6 Output Power Standard output power Booster high output power, 22 dBm (available for OAB1592) Booster high output power, 24 dBm (available for OAB1552) Characteristics unflattened Gain flattened DWDM (available for OAB1596 and OAB1598) Standard Accessories Part Number Description ED000899-A-00 Standard 19-inch rackmount kit Optional Accessories Part Number Description ED000899-A-01 Rackmount kit (Japan) Test & Measurement Regional Sales NORTH AMERICA TOLL FREE : 1 866 228 3762 FAX : +1 301 353 9216 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase Corporation. All rights reserved. 10109630 Rev. 007 10/06 LATIN AMERICA TEL : +55 11 5503 3800 FAX : +55 11 5505 1598 ASIA PACIFIC TEL : +852 2892 0990 FAX : +852 2892 0770 EMEA TEL : +49 7121 86 2222 FAX : +49 7121 86 1222 WEBSITE : www.jdsu.com