Spec Sheet INDUCTORS (High Reliability Application) SMD Power Inductors for Automotive / Industrial Applications (NS series) NS12555T220MNV Features Item Summary 22μH(±20%), 3.2A, 3.81A Lifecycle Stage Mass Production AEC-Q200 qualified Standard packaging quantity (minimum) Taping 2000pcs(500pcs*4reel) Products characteristics table External Dimensions -/125125 L 12.5mm ±0.3 Inductance 22μH(±20%) W 12.5mm ±0.3 Inductance Measuring Frequency 100kHz H 5.5mm ±0.35 Rated Current -Saturation Current 3.2A Rated Current -Temperature Rise Current 3.81A DC Resistance (max) 0.03564Ω Avg. of DC.Resistance 0.0297Ω Self-resonant Frequency (min) 13.2MHz RoHS Compliance Yes Halogen Free Yes Soldering Method Reflow CaseSize (EIA/JIS) Recommended Land Patterns 2015.03.09 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Halogen free / RoHS compliant Wire Wound Inductor 2014/12/8 -Electrical Characteristics Data- SMD Power Inductors for Industrial / Automotive Comfort and Safety Applications (NS series)(AEC-Q200 qualified) Dimension Length : Width : Height : NS12555T220MNV unit : mm 12.5 + / - 0.3 12.5 + / - 0.3 5.5 + / - 0.35 unit : inch ( 0.492 + / - 0.012 ) ( 0.492 + / - 0.012 ) ( 0.217 + / - 0.014 ) Inductance : 22 uH ( test freq at 0.1MHz ) ohm ( typ / max ) DC Resistance : 0.0297 / 0.03564 Saturation Current : 3.20 A ( max ) Temp. rise Current : 3.81 A ( max ) Saturation current typical : 30% reduction from initial L value. AEC-Q200 qualified Temp rise Current typical : Temperature will rise by 40 deg C DC Bias vs Inductance DC Bias vs Temperature 60 Self-temperature rise [deg] 30 Inductance [uH] 25 20 15 10 5 0 0 1000 2000 3000 4000 5000 DC Bias [mA] 50 40 30 20 10 0 0 2000 4000 6000 8000 10000 DC Bias [mA] Frequency vs Inductance Inductance [uH] 1000 100 10 1 0.1 1 10 100 1000 Frequency [MHz] The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the data at any time without notice. Before making final selection, please check product specification. The products are tested based on the test conditions and methods defined in AEC-Q200. Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc., and please review and approve TAIYO YUDEN's product specification before ordering.