MURS220-260 ULTRAFAST RECTIFIERS Features • High reliability • Low leakage • Low forward voltage • High current capability • Ultrafast switching speed • High surge capability • Good for switching mode circuit • RoHS compliant package Mechanical Data • Case: SMC Molded plastic • Epoxy: UL94V-O rate flame retardant • Lead: Lead Formed for Surface Mount • Polarity: Color band denotes cathode end • Mounting position: Any • Weight: 0.093 gram Graphic symbol Packing & Order Information 3,000/Reel MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol MURS220 MURS240 MURS260 Unit Maximum repetitive peak reverse voltage VRRM 200 400 600 V Working peak reverse voltage VRMS 140 280 420 V Maximum DC blocking voltage VDC 2000 400 600 V Maximum average forward rectified current IO(AV) 2.0 A IFSM 40 A Maximum Peak Forward Surge Current (60 Hz, Half wave,single phase ) Per Leg Maximum Instantaneous Forward Voltage at IF = 15 A VF Typical junction capacitance (NOTE1) CJ Publication Order Number: [MURS220-260] 1.0 1.2 15 1.5 V pF © Bruckewell Technology Corporation Rev. A -2014 MURS220-260 ULTRAFAST RECTIFIERS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Maximum DC reverse current TA=25°C at rated DC blocking voltage TA=125°C Symbol MURS220 MURS240 MURS260 5.0 IR A 100 25 Unit 50 Typical reverse recovery time (NOTE2) TRR Typical thermal resistance (NOTE3) RθJA 80 V TJ,TSTG -55 to +150 pF Operating junction and storage temperature range A Notes (1) Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. (2) Reverse recovery test conditions:IF=0.5A, IR=1.0A, IRR=0.25A (3) Thermal resistance from junction to ambient Publication Order Number: [MURS220-260] © Bruckewell Technology Corporation Rev. A -2014 MURS220-260 ULTRAFAST RECTIFIERS ■Ratings and Characteristic Curves FIG.1- FORWARD DERATING CURVE FIG.2- POWER DISSIPATION (PER LEG) FIG.3- TYPICAL FORWARD CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS Publication Order Number: [MURS220-260] © Bruckewell Technology Corporation Rev. A -2014 MURS220-260 ULTRAFAST RECTIFIERS Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [MURS220-260] © Bruckewell Technology Corporation Rev. A -2014