TDK B32774D4505000 Metallized polypropylene film capacitors (mkp) Datasheet

Film Capacitors
Metallized Polypropylene Film Capacitors (MKP)
Series/Type:
B32774 ... B32778
Date:
June 2015
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Metallized polypropylene film capacitors (MKP)
MKP DC link high density series up to 480 µF
Recommended applications
Frequency converters
Industrial and high-end power supplies
Solar inverters
Climatic
Max. operating temperature: 105 °C (case)
Climatic category (IEC 60068-1): 40/105/56
Construction
Dielectric: Polypropylene (MKP)
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
Features
Capacitance values up to 480 µF
High CV product, compact
Good self-healing properties
Over-voltage capability
Low losses with high current capability
High reliability
Long useful life
RoHS-compatible
Terminals
Parallel wire leads, lead-free tinned
2-pin, 4-pin and 12-pin versions
Standard lead lengths: 6 1 mm
Marking
Manufacturer's logo and lot number,
date code, rated capacitance (coded),
capacitance tolerance (code letter) and
rated DC voltage
Delivery mode
Bulk (untaped)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 45
B32774 ... B32778
B32774 ... B32778
MKP DC link high density series up to 480 µF
Dimensional drawings
Dimensions in mm
Number of wires
Lead spacing
±0.4
Lead diameter d1 ±0.05 Type
2-pin
27.5
0.8
B32774D
2-pin
37.5
1.0
B32776E
2-pin
37.5
1.0
B32776T
4-pin
37.5
1.2
B32776G
4-pin
37.5
1.2
B32776T
4-pin
52.5
1.2
B32778T
4-pin
52.5
1.2
B32778G
12-pin
52.5
1.2
B32778J
Dimensional drawings 2-pin versions
B32774D, B32776E
B32774D B32776E
Lead spacing
±0.4: 27.5
37.5
Lead diameter d1:
0.8
1.0
(Dimensions in mm)
B32776T (low profile)
Lead spacing
±0.4:
37.5
Lead diameter d1:
(Dimensions in mm)
Please read Cautions and warnings and
Important notes at the end of this document.
1.0
Page 3 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Dimensional drawings 4-pin versions
B32776G, B32778G
B32776G B32778G
Lead spacing
±0.4: 37.5
52.5
Lead diameter d1:
1.2
1.2
(Dimensions in mm)
B32776T, B32778T (low profile)
B32776T B32778T
Lead spacing
±0.4: 37.5
52.5
Lead diameter d1:
1.2
1.2
(Dimensions in mm)
Dimensional drawing 12-pin version
B32778J
Lead spacing
±0.4:
52.5
Lead diameter d1:
(Dimensions in mm)
Please read Cautions and warnings and
Important notes at the end of this document.
1.2
Page 4 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Overview of available types
Lead spacing 27.5 mm
37.5 mm
Type
B32774
B32776
Page
7
VR (V DC)
450
8
800
1100
1300
450
CR (µF)
1.5
2.0
2.7
3.0
3.3
3.5
3.9
5.0
6.8
7.0
7.5
8.0
8.5
9.0
10
12
13
14
15
16
20
22
25
30
35
40
45
50
60
65
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 45
575
800
900
1100
1300
B32774 ... B32778
MKP DC link high density series up to 480 µF
Lead spacing 52.5 mm
Type
B32778
Page
11
VR (V DC)
450
575
800
CR (µF)
14
20
25
27
30
35
38
40
42
45
50
55
58
60
70
75
80
90
100
110
120
130
150
170
180
200
210
270
360
480
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 45
900
1100
1300
B32774
MKP DC link high density series up to 480 µF
Ordering codes and packing units (lead spacing 27.5 mm)
CR1) Max. dimensions
w×h×l
P1
µF
mm
mm
Ordering code
(composition see
below)
VR,70 °C = 450 V DC, Vop,85 °C = 450 V DC
5.0 11.0 × 21.0 × 31.5 B32774D4505+000
10.0 15.0 × 24.5 × 31.5 B32774D4106+000
22.0 22.0 × 36.5 × 31.5 B32774D4226+000
VR,70 °C = 800 V DC, Vop,85 °C = 700 V DC
3.0 11.0 × 21.0 × 31.5 B32774D8305+000
5.0 14.0 × 24.5 × 31.5 B32774D8505+000
12.0 22.0 × 36.5 × 31.5 B32774D8126+000
VR,70 °C = 1100 V DC, Vop,85 °C = 920 V DC
2.0 12.5 × 21.5 × 31.5 B32774D0205+000
3.3 18.0 × 27.5 × 31.5 B32774D0335+000
5.0 19.0 × 30.0 × 31.5 B32774D0505+000
7.0 22.0 × 36.5 × 31.5 B32774D0705+000
VR,70 °C = 1300 V DC, Vop,85 °C = 1100 V DC
1.5 12.5 × 21.5 × 31.5 B32774D1155K000
3.0 18.0 × 27.5 × 31.5 B32774D1305K000
5.0 22.0 × 36.5 × 31.5 B32774D1505K000
IRMS,max2)
70 °C
10 kHz
A
ESRtyp
70 °C
10 kHz
mΩ
ESLtyp3) tan δ tan δ pcs.
70 °C
MOQ
10 kHz 1 kHz 10 kHz
nH
10-3 10-3
5.0
8.0
14.5
21.1
10.9
5.4
19.0
24.0
30.0
1.2
1.2
1.3
10.7
11.0
12.1
2352
1680
784
4.5
6.5
13.0
24.8
15.3
6.8
19.0
23.0
34.0
0.9
0.9
1.0
7.6
7.7
8.3
2352
1848
784
4.5
7.0
9.0
12.0
26.3
16.2
10.9
8.1
19.0
22.0
27.0
30.0
0.7
0.7
0.7
0.7
5.3
5.4
5.5
5.8
2100
1428
896
784
4.4
7.0
10.5
31.3
16.0
9.8
20.0
24.0
33.0
0.6
0.6
0.7
4.8
4.9
5.1
2100
1428
784
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
1) Capacitance value measured at 1 kHz
2) Max ripple current IRMS at 70 °C, 10 kHz for ∆T ≤ 20 °C at ∆ESRtyp ≤ ±5%
3) Typical ESL value measured at resonance frequency (see specific graphs of Z vs freq)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 45
B32776
MKP DC link high density series up to 480 µF
Ordering codes and packing units (lead spacing 37.5 mm)
CR1) Max. dimensions
w×h×l
P1
µF
mm
mm
VR,70 °C = 450 V DC, Vop,85 °C =
12 24.0 × 15.0 × 41.5 16 24.0 × 19.0 × 41.5 30 20.0 × 39.5 × 41.5 10.2
30 20.0 × 39.5 × 41.5 35 28.0 × 37.0 × 42.0 10.2
35 28.0 × 37.0 × 42.0 40 28.0 × 37.0 × 42.0 10.2
40 28.0 × 37.0 × 42.0 40 43.0 × 22.0 × 41.5 20.3
50 28.0 × 42.5 × 41.5 10.2
50 28.0 × 42.5 × 41.5 60 30.0 × 45.0 × 42.0 20.3
60 30.0 × 45.0 × 42.0 65 33.0 × 48.0 × 42.0 20.3
VR,70 °C = 575 V DC, Vop,85 °C =
8.5 24.0 × 15.0 × 41.5 12 24.0 × 19.0 × 41.5 25 20.0 × 39.5 × 41.5 10.2
25 20.0 × 39.5 × 41.5 30 28.0 × 37.0 × 42.0 10.2
30 28.0 × 37.0 × 42.0 30 43.0 × 22.0 × 41.5 20.3
35 28.0 × 42.5 × 41.5 10.2
35 28.0 × 42.5 × 41.5 45 30.0 × 45.0 × 42.0 20.3
45 30.0 × 45.0 × 42.0 50 33.0 × 48.0 × 42.0 20.3
Ordering code
(composition see
below)
450 V DC
B32776T4126K000
B32776T4166K000
B32776G4306+000
B32776E4306+000
B32776G4356+000
B32776E4356+000
B32776G4406+000
B32776E4406+000
B32776T4406K000
B32776G4506+000
B32776E4506+000
B32776G4606+000
B32776E4606+000
B32776G4656+000
500 V DC
B32776T5855+000
B32776T5126K000
B32776G5256K000
B32776E5256K000
B32776G5306K000
B32776E5306K000
B32776T5306K000
B32776G5356+000
B32776E5356+000
B32776G5456K000
B32776E5456K000
B32776G5506K000
IRMS,max2)
70 °C
10 kHz
A
ESRtyp
70 °C
10 kHz
mΩ
ESLtyp3) tan δ tan δ pcs.
70 °C
MOQ
10 kHz 1 kHz 10 kHz
nH
10-3 10-3
7.0
8.0
14.0
14.0
16.5
16.0
17.5
17.0
17.0
20.0
19.0
23.5
22.0
25.5
17.1
13.0
7.0
7.3
6.0
6.4
5.3
5.6
5.2
4.3
4.7
3.6
4.0
3.3
19.0
18.0
11.0
28.0
10.0
24.0
11.0
26.0
13.0
12.0
30.0
14.0
32.0
14.0
2.2
2.3
2.3
2.4
2.3
2.4
2.3
2.4
2.3
2.3
2.5
2.4
2.5
2.3
21.0
21.2
21.3
22.3
21.4
22.6
21.4
22.7
21.2
21.7
23.8
22.3
24.2
22.2
1040
780
640
640
440
440
440
440
280
440
440
400
400
180
6.5
8.0
14.0
13.5
16.5
16.5
16.5
19.0
18.0
22.0
21.0
25.0
19.9
14.4
7.0
7.4
5.8
6.1
5.8
5.0
5.3
4.0
4.4
3.5
19.0
18.0
12.0
28.0
11.0
26.0
13.0
12.0
29.0
13.0
32.0
14.0
1.9
1.9
1.9
2.0
1.9
2.0
1.9
1.9
2.0
1.9
2.1
2.0
17.2
17.4
17.5
18.3
17.6
18.5
17.3
17.8
19.0
17.9
19.7
18.1
1040
780
640
640
440
440
280
440
440
400
400
180
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
1) Capacitance value measured at 1 kHz
2) Max ripple current IRMS at 70 °C, 10 kHz for ∆T ≤ 20 °C at ∆ESRtyp ≤ ±5%
3) Typical ESL value measured at resonance frequency (see specific graphs of Z vs freq)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 45
B32776
MKP DC link high density series up to 480 µF
Ordering codes and packing units (lead spacing 37.5 mm)
CR1) Max. dimensions
w×h×l
P1
µF
mm
mm
VR,70 °C = 800 V DC, Vop,85 °C =
6.8 24.0 × 15.0 × 41.5 8.5 24.0 × 19.0 × 41.5 14 18.0 × 32.5 × 41.5 15 20.0 × 39.5 × 41.5 10.2
15 20.0 × 39.5 × 41.5 20 28.0 × 37.0 × 42.0 10.2
20 28.0 × 37.0 × 42.0 20 43.0 × 22.0 × 41.5 20.3
22 28.0 × 37.0 × 42.0 10.2
22 28.0 × 37.0 × 42.0 25 28.0 × 42.5 × 41.5 10.2
25 28.0 × 42.5 × 41.5 30 30.0 × 45.0 × 42.0 20.3
30 30.0 × 45.0 × 42.0 35 33.0 × 48.0 × 42.0 20.3
VR,70 °C = 900 V DC, Vop,85 °C =
5 24.0 × 15.0 × 41.5 7.5 24.0 × 19.0 × 41.5 15 20.0 × 39.5 × 41.5 10.2
15 20.0 × 39.5 × 41.5 16 43.0 × 22.0 × 41.5 20.3
20 28.0 × 37.0 × 42.0 10.2
20 28.0 × 37.0 × 42.0 22 28.0 × 42.5 × 41.5 10.2
22 28.0 × 42.5 × 41.5 25 30.0 × 45.0 × 42.0 20.3
25 30.0 × 45.0 × 42.0 30 33.0 × 48.0 × 42.0 20.3
Ordering code
(composition see
below)
700 V DC
B32776T8685+000
B32776T8855+000
B32776E8146+000
B32776G8156+000
B32776E8156+000
B32776G8206+000
B32776E8206+000
B32776T8206K000
B32776G8226+000
B32776E8226+000
B32776G8256+000
B32776E8256+000
B32776G8306+000
B32776E8306+000
B32776G8356+000
800 V DC
B32776T9505+000
B32776T9755K000
B32776G9156K000
B32776E9156K000
B32776T9166K000
B32776G9206K000
B32776E9206K000
B32776G9226K000
B32776E9226K000
B32776G9256+000
B32776E9256+000
B32776G9306+000
IRMS,max2)
70 °C
10 kHz
A
ESRtyp
70 °C
10 kHz
mΩ
ESLtyp3) tan δ tan δ pcs.
70 °C
MOQ
10 kHz 1 kHz 10 kHz
nH
10-3 10-3
6.0
7.5
10.0
12.0
11.5
14.5
14.5
14.5
15.5
15.0
17.0
16.5
19.5
19.0
22.0
22.1
17.8
11.5
9.6
10.3
7.5
7.8
7.2
6.8
7.1
6.1
6.4
5.1
5.5
4.3
18.0
18.0
23.0
10.0
24.0
10.0
24.0
14.0
11.0
25.0
11.0
28.0
12.0
30.0
14.0
1.7
1.7
1.8
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.8
1.7
1.8
1.7
15.1
15.1
16.3
15.2
15.7
15.3
15.9
15.1
15.3
16.0
15.4
16.3
15.6
16.7
15.7
1040
780
720
640
640
440
440
280
440
440
440
440
400
400
180
5.5
7.5
12.5
12.0
14.0
15.0
15.0
17.0
16.5
19.0
18.5
21.5
26.1
17.8
9.1
9.4
8.1
7.0
7.3
6.3
6.6
5.5
5.9
4.7
19.0
18.0
12.0
28.0
14.0
11.0
26.0
12.0
29.0
13.0
32.0
14.0
1.5
1.5
1.5
1.5
1.5
1.5
1.6
1.5
1.6
1.5
1.6
1.5
13.4
13.5
13.6
14.1
13.5
13.6
14.2
13.7
14.5
13.8
14.7
13.9
1040
780
640
640
280
440
440
440
440
400
400
180
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
1) Capacitance value measured at 1 kHz
2) Max ripple current IRMS at 70 °C, 10 kHz for ∆T ≤ 20 °C at ∆ESRtyp ≤ ±5%
3) Typical ESL value measured at resonance frequency (see specific graphs of Z vs freq)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 45
B32776
MKP DC link high density series up to 480 µF
Ordering codes and packing units (lead spacing 37.5 mm)
CR1) Max. dimensions
w×h×l
P1
µF
mm
mm
Ordering code
(composition see
below)
VR,70 °C = 1100 V DC, Vop,85 °C = 920 V DC
3.9 24.0 × 15.0 × 41.5 B32776T0395+000
5 24.0 × 19.0 × 41.5 B32776T0505+000
12 20.0 × 39.5 × 41.5 10.2 B32776G0126+000
12 20.0 × 39.5 × 41.5 B32776E0126+000
13 43.0 × 22.0 × 41.5 20.3 B32776T0136K000
14 28.0 × 37.0 × 42.0 10.2 B32776G0146+000
14 28.0 × 37.0 × 42.0 B32776E0146+000
16 28.0 × 42.5 × 41.5 10.2 B32776G0166+000
16 28.0 × 42.5 × 41.5 B32776E0166+000
20 30.0 × 45.0 × 42.0 20.3 B32776G0206+000
20 30.0 × 45.0 × 42.0 B32776E0206+000
22 33.0 × 48.0 × 42.0 20.3 B32776G0226+000
VR,70 °C = 1300 V DC, Vop,85 °C = 1100 V DC
2.7 24.0 × 15.0 × 41.5 B32776T1275+000
3.5 24.0 × 19.0 × 41.5 B32776T1355+000
8.0 20.0 × 39.5 × 41.5 10.2 B32776G1805+000
8.0 20.0 × 39.5 × 41.5 B32776E1805+000
9.0 43.0 × 22.0 × 41.5 20.3 B32776T1905K000
10 28.0 × 37.0 × 42.0 10.2 B32776G1106+000
10 28.0 × 37.0 × 42.0 B32776E1106+000
12 28.0 × 42.5 × 41.5 10.2 B32776G1126+000
12 28.0 × 42.5 × 41.5 B32776E1126+000
14 30.0 × 45.0 × 42.0 20.3 B32776G1146+000
14 30.0 × 45.0 × 42.0 B32776E1146+000
16 33.0 × 48.0 × 42.0 20.3 B32776G1166+000
IRMS,max2)
70 °C
10 kHz
A
ESRtyp
70 °C
10 kHz
mΩ
ESLtyp3) tan δ tan δ pcs.
70 °C
MOQ
10 kHz 1 kHz 10 kHz
nH
10-3 10-3
5.0
6.5
12.0
11.5
13.0
13.5
13.5
15.5
15.0
18.0
17.5
21.0
30.5
23.6
10.2
10.5
8.9
8.7
9.0
7.4
7.8
6.0
6.5
4.9
18.0
18.0
12.0
28.0
14.0
21.0
25.0
12.0
30.0
14.0
32.0
15.0
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.3
12.1
12.1
12.2
12.6
12.1
12.2
12.6
12.3
12.9
12.4
13.1
11.4
1040
780
640
640
280
440
440
440
440
400
400
180
5.0
6.0
11.0
10.5
12.0
13.0
12.5
14.5
14.0
17.0
16.5
19.0
34.7
27.4
12.1
12.4
10.7
9.6
9.9
8.1
8.5
6.8
7.3
6.0
19.0
18.0
12.0
24.0
13.0
11.0
26.0
12.0
28.0
14.0
32.0
15.0
1.1
1.1
1.1
1.2
1.1
1.1
1.2
1.1
1.2
1.1
1.2
1.1
9.6
9.7
9.7
10.0
9.7
9.7
10.0
9.8
10.1
10.1
10.4
9.9
1040
780
640
640
280
440
440
440
440
400
400
180
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
1) Capacitance value measured at 1 kHz
2) Max ripple current IRMS at 70 °C, 10 kHz for ∆T ≤ 20 °C at ∆ESRtyp ≤ ±5%
3) Typical ESL value measured at resonance frequency (see specific graphs of Z vs freq)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 45
B32778
MKP DC link high density series up to 480 µF
Ordering codes and packing units (lead spacing 52.5 mm, P1 = 20.3 mm)
CR1) Max. dimensions
w×h×l
µF
IRMS,max2)
70 °C
10 kHz
A
Ordering code
(composition see
below)
mm
VR,70 °C = 450 V DC, Vop,85 °C = 450 V DC
55 43.0 × 24.0 × 57.5 B32778T4556K000
75 30.0 × 45.0 × 57.5 B32778G4756+000
80 30.0 × 45.0 × 57.5 B32778G4806+000
100 35.0 × 50.0 × 57.5 B32778G4107+000
110 35.0 × 50.0 × 57.5 B32778G4117K000
150 130.0 × 24.0 × 57.5 B32778J4157K000
170 45.0 × 57.0 × 57.5 B32778G4177+000
180 60.0 × 45.0 × 57.5 B32778G4187+000
480 130.0 × 58.0 × 57.5 B32778J4487K000
VR,70 °C = 575 V DC, Vop,85 °C = 500 V DC
40 43.0 × 24.0 × 57.5 B32778T5406K000
60 30.0 × 45.0 × 57.5 B32778G5606+000
80 35.0 × 50.0 × 57.5 B32778G5806+000
110 130.0 × 24.0 × 57.5 B32778J5117K000
120 45.0 × 57.0 × 57.5 B32778G5127+000
130 60.0 × 45.0 × 57.5 B32778G5137+000
360 130.0 × 58.0 × 57.5 B32778J5367K000
VR,70 °C = 800 V DC, Vop,85 °C = 700 V DC
30 43.0 × 24.0 × 57.5 B32778T8306K000
45 30.0 × 45.0 × 57.5 B32778G8456+000
50 30.0 × 45.0 × 57.5 B32778G8506+000
55 35.0 × 50.0 × 57.5 B32778G8556+000
60 35.0 × 50.0 × 57.5 B32778G8606+000
80 130.0 × 24.0 × 57.5 B32778J8806K000
90 45.0 × 57.0 × 57.5 B32778G8906+000
100 60.0 × 45.0 × 57.5 B32778G8107+000
270 130.0 × 58.0 × 57.5 B32778J8277K000
ESRtyp
70 °C
10 kHz
mΩ
16.5
21.0
21.5
26.0
27.0
43.5
36.5
39.0
79.5
7.2
5.6
5.3
4.3
3.9
2.7
2.6
2.5
0.9
13.0
12.0
13.0
14.0
15.0
4.0
17.0
19.0
6.0
4.3
4.4
4.4
4.5
4.5
4.4
4.6
4.6
4.8
41.7
42.6
42.7
43.3
43.6
42.1
45.7
44.6
45.4
420
280
280
108
108
80
140
200
40
15.5
20.5
25.5
40.5
34.5
36.5
75.0
8.5
5.8
4.4
3.0
3.1
2.8
1.0
13.0
13.0
15.0
5.0
17.0
19.0
6.0
3.6
3.7
3.7
3.6
3.8
3.8
4.0
34.5
35.3
36.0
34.5
37.2
36.7
37.3
420
280
108
80
140
200
40
14.5
19.5
20.0
23.0
23.5
37.5
32.5
34.5
70.5
9.8
6.6
6.3
5.6
5.1
3.6
3.5
3.2
1.2
14.0
14.0
13.0
14.0
15.0
4.0
17.0
19.0
6.0
3.2
3.2
3.2
3.2
3.3
3.2
3.3
3.3
3.5
30.2
30.9
30.9
31.1
31.2
30.2
32.2
31.9
32.4
420
280
280
108
108
80
140
200
40
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
1) Capacitance value measured at 1 kHz
2) Max ripple current IRMS at 70 °C, 10 kHz for ∆T ≤ 20 °C at ∆ESRtyp ≤ ±5%
3) Typical ESL value measured at resonance frequency (see specific graphs of Z vs freq)
Please read Cautions and warnings and
Important notes at the end of this document.
ESLtyp3) tan δ tan δ
pcs.
70 °C
MOQ
10 kHz 1 kHz 10 kHz
nH
10-3
10-3
Page 11 of 45
B32778
MKP DC link high density series up to 480 µF
Ordering codes and packing units (lead spacing 52.5 mm, P1 = 20.3 mm)
CR1) Max. dimensions
w×h×l
µF
Ordering code
(composition see
below)
mm
VR,70 °C = 900 V DC, Vop,85 °C = 800 V DC
25 43.0 × 24.0 × 57.5 B32778T9256K000
35 30.0 × 45.0 × 57.5 B32778G9356+000
50 35.0 × 50.0 × 57.5 B32778G9506K000
70 45.0 × 57.0 × 57.5 B32778G9706+000
70 130.0 × 24.0 × 57.5 B32778J9706K000
75 60.0 × 45.0 × 57.5 B32778G9756+000
210 130.0 × 58.0 × 57.5 B32778J9217K000
VR,70 °C = 1100 V DC, Vop,85 °C = 920 V DC
20 43.0 × 24.0 × 57.5 B32778T0206K000
30 30.0 × 45.0 × 57.5 B32778G0306+000
40 35.0 × 50.0 × 57.5 B32778G0406+000
58 45.0 × 57.0 × 57.5 B32778G0586+000
60 60.0 × 45.0 × 57.5 B32778G0606+000
60 130.0 × 24.0 × 57.5 B32778J0606K000
200 130.0 × 58.0 × 57.5 B32778J0207K000
VR,70 °C = 1300 V DC, Vop,85 °C = 1100 V DC
14 43.0 × 24.0 × 57.5 B32778T1146K000
20 30.0 × 45.0 × 57.5 B32778G1206+000
25 35.0 × 50.0 × 57.5 B32778G1256+000
27 35.0 × 50.0 × 57.5 B32778G1276+000
38 130.0 × 24.0 × 57.5 B32778J1386K000
40 45.0 × 57.0 × 57.5 B32778G1406+000
42 60.0 × 45.0 × 57.5 B32778G1426+000
120 130.0 × 58.0 × 57.5 B32778J1127K000
IRMS,max2)
70 °C
10 kHz
A
ESRtyp
70 °C
10 kHz
mΩ
ESLtyp3) tan δ tan δ
pcs.
70 °C
MOQ
10 kHz 1 kHz 10 kHz
nH
10-3
10-3
13.5
18.0
22.5
31.0
36.0
32.5
66.0
10.7
7.7
5.6
3.8
3.8
3.6
1.3
13.0
13.0
15.0
18.0
4.0
20.0
6.0
2.8
2.9
2.9
3.0
2.9
2.9
3.1
26.8
27.3
27.7
28.5
27.2
28.2
28.6
420
280
108
140
80
200
40
13.0
17.5
21.5
29.0
30.5
34.5
66.0
11.9
8.2
6.2
4.3
4.0
4.1
1.4
13.0
13.0
15.0
17.0
19.0
4.0
6.0
2.6
2.6
2.7
2.7
2.7
2.7
3.0
24.1
24.5
25.9
25.4
25.2
25.1
26.8
420
280
108
140
200
80
40
12.0
16.0
19.0
19.5
31.5
26.5
28.0
58.5
13.8
9.7
7.8
7.3
5.1
5.0
4.7
1.7
13.0
13.0
15.0
15.0
4.0
17.0
19.0
6.0
2.1
2.1
2.1
2.1
2.1
2.2
2.2
2.3
19.5
19.8
19.9
20.0
19.5
20.3
20.2
20.5
420
280
108
108
80
140
200
40
MOQ = Minimum Order Quantity, consisting of 4 packing units.
Intermediate capacitance values are available on request.
Composition of ordering code
+ = Capacitance tolerance code:
J = ±5%
K = ±10%
1) Capacitance value measured at 1 kHz
2) Max ripple current IRMS at 70 °C, 10 kHz for ∆T ≤ 20 °C at ∆ESRtyp ≤ ±5%
3) Typical ESL value measured at resonance frequency (see specific graphs of Z vs freq)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Technical data
Reference standard: IEC 61071.
All data given at T = 20 °C, unless otherwise specified.
Max. operating temperature, Top,max
+105 °C
Operating temperature range (case)
Upper category temperature Tmax
+105 °C
Lower category temperature Tmin
–40 °C
Insulation Resistance Rins
τ > 10 000 s (after 1 min.)
given as time constant
For VR ≥ 500 V measured at 500 V
τ = CR Rins, rel. humidity ≤ 65%
For VR < 500 V measured at VR
(minimum as-delivered values)
DC test voltage between terminals (10 s) 1.5 VR
Voltage test terminal to case (10 s)
2110 V AC, 50 Hz
Pulse Handling Capability (V/µs)
IP (A) / C (µF)
10 fit (≤ 1 10-9/h) at 0.5 VR, 40 °C
Reliability:
Failure rate λ
For conversion to other operating conditions, refer to
chapter "Quality assurance", data book 2009 "Film
capacitors", page 442.
100 000 h at VR and 70 °C
Service life tSL
VR (V DC)
Continuous operation voltage
Vop (V DC) at 70 °C
Continuous operation voltage
Vop (V DC) at 85 °C
For temperatures between
85 °C and 105 °C
450
450
575
575
800
800
900
900
1100
1100
1300
1300
450
500
700
800
920
1100
1.33%/°C of Vop derating compared to Vop at 85 °C
Typical waveforms
Restrictions:
VR: Maximum operating peak voltage of either polarity but of a non-reversing waveform, for which
the capacitor has been designed for continuous operation.
AC ≤ 0.2 VR
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Overvoltage
Maximum duration within one day
Observation
1.1 VR
1.15 VR
1.2 VR
1.3 VR
30% of on-load duration
30 min.
5 min.
1 min.
System regulation
System regulation
System regulation
System regulation
NOTE 1 An overvoltage equal to 1.5 VR for 30 ms is permitted 1000 times during the life of
the capacitor.
The amplitudes of the overvoltages that may be tolerated without significant reduction in the life
time of the capacitor depend on their duration, the number of application and the capacitor
temperature.
In addition these values assume that the overvoltages may appear when the internal
temperature of the capacitor is less than 0 °C but within the temperature category.
NOTE 2
The average applied voltage must not be higher than the specified voltage.
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
Note:
The values of dV/dt provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt values
Lead spacing
27.5 mm
Type
B32774
VR (V DC)
37.5 mm
B32776
450
800
1100
1300
450
575
800
900
1100
1300
dV/dt in V/µs
30
40
75
100
21
22
22
35
54
73
Lead spacing
52.5 mm
Type
B32778
450
575
800
900
1100
1300
14
14
15
22
35
50
VR (V DC)
dV/dt in V/µs
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 45
B32774
MKP DC link high density series up to 480 µF
Characteristics curves
Additional technical information can be found under "Design support" on www.epcos.com
Impedance Z versus frequency f
(typical values)
Lead spacing 27.5 mm / B32774D4*
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm / B32774D4*
Impedance Z versus frequency f
(typical values)
Lead spacing 27.5 mm / B32774D8*
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm / B32774D8*
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 45
B32774
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 27.5 mm / B32774D0*
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm / B32774D0*
Impedance Z versus frequency f
(typical values)
Lead spacing 27.5 mm / B32774D1*
ESR versus frequency f
(typical values)
Lead spacing 27.5 mm / B32774D1*
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E4x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E4x
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G4x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G4x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E5x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E5x
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G5x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G5x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E8x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E8x
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G8x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G8x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E9x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E9x
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G9x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G9x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E0x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E0x
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G0x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G0x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E1x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-E1x
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G1x
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-G1x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 22 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-Tx / 2-pins
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-Tx / 2-pins
Impedance Z versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-Tx / 4-pins
ESR versus frequency f
(typical values)
Lead spacing 37.5 mm / B32776-Tx / 4-pins
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 45
B32778
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G4x
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G4x
Impedance Z versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G5x
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G5x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 45
B32778
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G8x
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G8x
Impedance Z versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G9x
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G9x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 45
B32778
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G0x
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G0x
Impedance Z versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G1x
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-G1x
Please read Cautions and warnings and
Important notes at the end of this document.
Page 26 of 45
B32778
MKP DC link high density series up to 480 µF
Characteristics curves
Impedance Z versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-Tx
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-Tx
Impedance Z versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-Jx
ESR versus frequency f
(typical values)
Lead spacing 52.5 mm / B32778-Jx
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 45
B32774
MKP DC link high density series up to 480 µF
Characteristics curves
Permissible current IRMS versus frequency f at 70 °C
Lead spacing 27.5 mm
B32774-Dx
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Permissible current IRMS versus frequency f at 70 °C
Lead spacing 37.5 mm
B32776-Ex
B32776-Gx
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 45
B32776
MKP DC link high density series up to 480 µF
Characteristics curves
Permissible current IRMS versus frequency f at 70 °C
Lead spacing 37.5 mm
B32776-Tx
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 45
B32778
MKP DC link high density series up to 480 µF
Characteristics curves
Permissible current IRMS versus frequency f at 70 ° C
Lead spacing 52.5 mm
B32778-Gx, 4 pins
B32778-Tx, 4 pins
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 45
B32778
MKP DC link high density series up to 480 µF
Characteristics curves
Permissible current IRMS versus frequency f at 70 ° C
Lead spacing 52.5 mm
B32778-Jx, 12 pins
Please read Cautions and warnings and
Important notes at the end of this document.
Page 32 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Curves Characteristics (Irms derating vs temperature)
Maximum IRMS current as function of the ambient temperature: IRMS (Tamb) = Factor x IRMS (70 ºC)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 33 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Heat transference for self heating calculation
BOX DIMENSIONS
Figure 1
w (mm)
11.0
11.0
12.5
13.5
14.0
15.0
16.0
18.0
18.0
19.0
20.0
21.0
22.0
12.0
14.0
16.0
18.0
20.0
24.0
24.0
28.0
28.0
30.0
33.0
43.0
30.0
35.0
43.0
45.0
60.0
130.0
130.0
h (mm)
19.0
21.0
21.5
23.0
24.5
24.5
32.0
27.5
33.0
30.0
11.0
31.0
36.5
22.0
25.0
28.5
32.5
39.5
19.0
15.0
37.0
42.5
45.0
48.0
22.0
45.0
50.0
22.0
57.0
45.0
22.0
58.0
l (mm)
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
42.0
41.5
42.0
42.0
41.5
57.5
57.5
57.5
57.5
57.5
57.5
57.5
EQUIVALENT HEAT
COEFFICIENT
G (mW/°C)
25
28
30
32
35
36
45
44
48
48
65
51
58
70
43
50
59
72
50
44
83
90
100
100
80
125
145
103
185
192
200
300
The equivalent heat coefficient "G (mW/ºC)" is given for measuring the temperature on the lateral
surface of the plastic box as figure 1 shows. By using a thermocouple and avoiding effect of
radiation and convection the temperature measured during operation conditions should be a
result of the dissipated power divided by the equivalent heat coefficient.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 34 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Self Heating by power dissipation & equivalent heat coefficient
The IRMS and consequently the power dissipation must be limited during operation in order to not
exceed the maximum limit of ∆T allowed for this series. ∆Tmax given for this series is equal or
lower than 20 °C at rated temperature (70 °C), for higher ambient temperatures ∆Tmax (T) will have
the same derating factor than IRMS vs temperature and then an equivalent derating as per:
∆Tmax (T) = (Factor)2 x ∆T (70 °C).
For any particular IRMS the ∆T may be calculated by:
∆T (°C) = Pdis (mW) / G(mW/°C)
Where ∆T (°C) is the difference between the temperature measured on the box (see figure 1) and
the ambient temperature when capacitor is working during normal operation;
∆T (°C) = Top(°C) Tamb (°C).
It represents the increasing of temperature provoked by the IRMS during operation.
G (mW/°C) is the equivalent heat coefficient described above and Pdis (mW) is the dissipated
power defined by:
Pdis (mW) = ESRtyp (mΩ) x Irms 2 (ARMS).
Example for thermal calculation:
We will take as reference B32778G0306K (30 µF/1100 V) type for thermal calculation.
Considering the following load and capacitor characteristics:
IRMS : 12 ARMS at 20 kHz
G (mW/°C): 125
Tamb: 85 °C 30 x 45 x 57.5 box
Then we have to find the ESRtyp at 20 kHz what is approx . 8.2 mΩ.
So according to:
Pdis (mW) = ESRtyp(mΩ) x Irms 2(ARMS)
we have the following:
Pdis (mW) = 8.2 mΩ x 12 ARMS2 = 1181 mW
and as per:
∆T (°C) = Pdis (mW) / G (mW/°C)
we have the following:
∆T (°C) = 1181 (mW) / 125 (mW/°C) = 9.5 °C
What is below of the
∆Tmax (85 °C) = (Factor)2 x ∆T (70 °C) = (0.7)2 x 20 °C = 9.8 °C
On the other hand we may confirm that max IRMS at 20 kHz at 70 °C = 17.5 ARMS
And then max IRMS for 85 °C of ambient temperature is defined as follows:
IRMS (85 °C) = Factor x IRMS (70 °C) = 0.7 x 17.5 ARMS = 12.25 ARMS
What confirms once again that IRMS (12 ARMS at 20 kHz) is below the max specified for such
frequency and ambient temperature.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 35 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Life time expectancy - typical curve (450 V DC / B3277x-X4
Life time expectancy - typical curve (575 V DC / 800 V DC / 900 V DC / 1100 V DC /
1300 V DC / B3277X-5/8/9/0/1)
Note: Confidence level of 95%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 36 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Testing and Standards
Test
Reference
Electrical
Parameters
(Routine test)
IEC 61071-11
Robustness of
terminations
(Type test)
Resistance to
soldering heat
(Type test)
Conditions of test
Voltage between terminals,
1.5 VR, during 10 s
Insulation resistance, RINS at VR if
VR < 500 V or 500 V if VR ≥ 500 V
Capacitance, C at 1 kHz
(room temperature)
Dissipation factor, tan δ at
1/10 kHz (room temperature)
IEC 60068-2-21 Tensile strength (test Ua1)
Tensile
Wire diameter
force
0.5 < d1 ≤ 0.8 mm
10 N
0.8 < d1 ≤ 1.25 mm 20 N
IEC 60068-2-20, Solder bath temperature at
test Tb,
260 ± 5 °C, immersion for
method 1A
10 seconds
Performance
requirements
Within specified limits
Capacitance and tan δ
within specified limits
∆C/C0 ≤ 2%
I∆ tan δ l ≤ 0.002
I∆C/C0 I ≤ 2%
I∆ tan δ I ≤ 0.002
RINS ≥ 50% of initial limit
Rapid change of IEC 60384-16
temperature
(Type test)
TA = lower category temperature
TB = upper category temperature
Five cycles, duration t = 30 min.
Vibration
(Type test)
IEC 60384-16
Bump
(Type test)
IEC 60384-16
Climatic
sequence
(Type test)
IEC 60384-16
Damp Heat
Steady State
(Type test)
IEC 60384-16
Test FC: vibration sinusoidal
No visible damage
Displacement: 0.75 mm
Accleration: 98 m/s2
Frequency: 10 Hz ... 500 Hz
Test duration: 3 orthogonal axes,
2 hours each axe
Test Eb: Total 4000 bumps with No visible damage
I∆C/C0 I ≤ 2%
390 m/s2 mounted on PCB
I∆ tan δ I ≤ 0.002
6 ms duration
RINS ≥ 50% of initial limit
Dry heat Tb / 16 h.
No visible damage
Damp heat cyclic, 1st cycle
I∆C/C0 I ≤ 3%
+ 55 °C / 24h / 95% ... 100% RH I∆ tan δ I ≤ 0.001
Cold Ta / 2h
RINS ≥ 50% of initial limit
Damp heat cyclic, 5 cycles
+ 55 °C / 24h / 95% ... 100% RH
Test Ca
No visible damage
40 °C / 93% RH / 56 days
I∆C/C0 I ≤ 5%
I∆ tan δ I ≤ 0.005
RINS ≥ 50% of initial limit
Please read Cautions and warnings and
Important notes at the end of this document.
Page 37 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Test
Reference
Conditions of test
Endurance
(Type test)
IEC 60384-16
70 °C / 1.25 VR / 1000 hours or
85 °C / 1.25 Vop / 1000 hours or
100 °C / 1.25 Vop / 1000 hours
Please read Cautions and warnings and
Important notes at the end of this document.
Page 38 of 45
Performance
requirements
No visible damage
I∆C/C0 I ≤ 5% at 1 kHz
I∆ tan δ I ≤ 0.005
RINS ≥ 50% of initial limit
B32774 ... B32778
MKP DC link high density series up to 480 µF
Cautions and warnings
Do not exceed the upper category temperature (UCT).
Do not apply any mechanical stress to the capacitor terminals.
Avoid any compressive, tensile or flexural stress.
Do not move the capacitor after it has been soldered to the PC board.
Do not pick up the PC board by the soldered capacitor.
Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified
lead spacing.
Do not exceed the specified time or temperature limits during soldering.
Avoid external energy inputs, such as fire or electricity.
Avoid overload of the capacitors.
The table below summarizes the safety instructions that must always be observed. A detailed description can be found in the relevant sections of the chapters "General technical information" and
"Mounting guidelines".
Topic
Storage conditions
Flammability
Safety information
Reference chapter
"General technical
information"
Make sure that capacitors are stored within the
4.5
specified range of time, temperature and humidity "Storage conditions"
conditions.
Avoid external energy, such as fire or electricity
5.3
(passive flammability), avoid overload of the
"Flammability"
capacitors (active flammability) and consider the
flammability of materials.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 39 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Topic
Safety information
Resistance to
vibration
Do not exceed the tested ability to withstand
vibration. The capacitors are tested to
IEC 60068-2-6.
EPCOS offers film capacitors specially designed
for operation under more severe vibration regimes
such as those found in automotive applications.
Consult our catalog "Film Capacitors for
Automotive Electronics".
Soldering
Do not exceed the specified time or temperature
limits during soldering.
Cleaning
Use only suitable solvents for cleaning capacitors.
Embedding of
When embedding finished circuit assemblies in
capacitors in
plastic resins, chemical and thermal influences
finished assemblies must be taken into account.
Caution: Consult us first, if you also wish to
embed other uncoated component types!
Reference chapter
"Mounting guidelines"
5.2
"Resistance to vibration"
1 "Soldering"
2 "Cleaning"
3 "Embedding of
capacitors in finished
assemblies"
Display of ordering codes for EPCOS products
The ordering code for one and the same product can be represented differently in data sheets,
data books, other publications and the website of EPCOS, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications
of the respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 40 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Symbols and terms
Symbol
α
αC
A
βC
C
CR
∆C
∆C/C
∆C/CR
dt
∆t
∆T
∆tan δ
∆V
dV/dt
∆V/∆t
E
ESL
ESR
f
f1
f2
fr
FD
FT
i
IC
English
Heat transfer coefficient
Temperature coefficient of capacitance
Capacitor surface area
Humidity coefficient of capacitance
Capacitance
Rated capacitance
Absolute capacitance change
Relative capacitance change (relative
deviation of actual value)
Capacitance tolerance (relative deviation
from rated capacitance)
Time differential
Time interval
Absolute temperature change
(self-heating)
Absolute change of dissipation factor
Absolute voltage change
Time differential of voltage function (rate
of voltage rise)
Voltage change per time interval
Activation energy for diffusion
Self-inductance
Equivalent series resistance
Frequency
Frequency limit for reducing permissible
AC voltage due to thermal limits
German
Wärmeübergangszahl
Temperaturkoeffizient der Kapazität
Kondensatoroberfläche
Feuchtekoeffizient der Kapazität
Kapazität
Nennkapazität
Absolute Kapazitätsänderung
Relative Kapazitätsänderung (relative
Abweichung vom Ist-Wert)
Kapazitätstoleranz (relative Abweichung
vom Nennwert)
Differentielle Zeit
Zeitintervall
Absolute Temperaturänderung
(Selbsterwärmung)
Absolute Änderung des Verlustfaktors
Absolute Spannungsänderung
Differentielle Spannungsänderung
(Spannungsflankensteilheit)
Spannungsänderung pro Zeitintervall
Aktivierungsenergie zur Diffusion
Eigeninduktivität
Ersatz-Serienwiderstand
Frequenz
Grenzfrequenz für thermisch bedingte
Reduzierung der zulässigen
Wechselspannung
Frequency limit for reducing permissible Grenzfrequenz für strombedingte
AC voltage due to current limit
Reduzierung der zulässigen
Wechselspannung
Resonant frequency
Resonanzfrequenz
Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur
Diffusion
Derating factor
Deratingfaktor
Current (peak)
Stromspitze
Category current (max. continuous
Kategoriestrom (max. Dauerstrom)
current)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 41 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Symbol
IRMS
iz
k0
LS
λ
λ0
λtest
Pdiss
Pgen
Q
ρ
R
R
Ri
Rins
RP
RS
S
t
T
τ
tan δ
tan δD
tan δP
tan δS
TA
Tmax
Tmin
tOL
Top
TR
Tref
tSL
English
(Sinusoidal) alternating current,
root-mean-square value
Capacitance drift
Pulse characteristic
Series inductance
Failure rate
Constant failure rate during useful
service life
Failure rate, determined by tests
Dissipated power
Generated power
Heat energy
Density of water vapor in air
Universal molar constant for gases
Ohmic resistance of discharge circuit
Internal resistance
Insulation resistance
Parallel resistance
Series resistance
severity (humidity test)
Time
Temperature
Time constant
Dissipation factor
Dielectric component of dissipation
factor
Parallel component of dissipation factor
Series component of dissipation factor
Temperature of the air surrounding the
component
Upper category temperature
Lower category temperature
Operating life at operating temperature
and voltage
Operating temperature
Rated temperature
Reference temperature
Reference service life
Please read Cautions and warnings and
Important notes at the end of this document.
German
(Sinusförmiger) Wechselstrom
Inkonstanz der Kapazität
Impulskennwert
Serieninduktivität
Ausfallrate
Konstante Ausfallrate in der
Nutzungsphase
Experimentell ermittelte Ausfallrate
Abgegebene Verlustleistung
Erzeugte Verlustleistung
Wärmeenergie
Dichte von Wasserdampf in Luft
Allg. Molarkonstante für Gas
Ohmscher Widerstand des
Entladekreises
Innenwiderstand
Isolationswiderstand
Parallelwiderstand
Serienwiderstand
Schärfegrad (Feuchtetest)
Zeit
Temperatur
Zeitkonstante
Verlustfaktor
Dielektrischer Anteil des Verlustfaktors
Parallelanteil des Verlfustfaktors
Serienanteil des Verlustfaktors
Temperatur der Luft, die das Bauteil
umgibt
Obere Kategorietemperatur
Untere Kategorietemperatur
Betriebszeit bei Betriebstemperatur und
-spannung
Beriebstemperatur
Nenntemperatur
Referenztemperatur
Referenz-Lebensdauer
Page 42 of 45
B32774 ... B32778
MKP DC link high density series up to 480 µF
Symbol
VAC
VC
VC,RMS
English
AC voltage
Category voltage
Category AC voltage
VCD
Vch
VDC
VFB
Vi
Vo
Vop
Vp
Vpp
VR
Corona-discharge onset voltage
Charging voltage
DC voltage
Fly-back capacitor voltage
Input voltage
Output voltage
Operating voltage
Peak pulse voltage
Peak-to-peak voltage Impedance
Rated voltage
Amplitude of rated AC voltage
R
VRMS
German
Wechselspannung
Kategoriespannung
(Sinusförmige)
Kategorie-Wechselspannung
Teilentlade-Einsatzspannung
Ladespannung
Gleichspannung
Spannung (Flyback)
Eingangsspannung
Ausgangssspannung
Betriebsspannung
Impuls-Spitzenspannung
Spannungshub
Nennspannung
Amplitude der Nenn-Wechselspannung
VSC
Vsn
(Sinusoidal) alternating voltage,
root-mean-square value
S-correction voltage
Snubber capacitor voltage
Z
Impedance
Spannung bei Anwendung "S-correction"
Spannung bei Anwendung
"Beschaltung"
Scheinwiderstand
Lead spacing
Rastermaß
Please read Cautions and warnings and
Important notes at the end of this document.
(Sinusförmige) Wechselspannung
Page 43 of 45
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
Page 44 of 45
Important notes
7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue,
MiniCell, MKD, MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D,
SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and
in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
Page 45 of 45