Keysight M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming 500 MSa/s, 16 Bits, 2 Channel AWG + 500 MSa/s, 14 Bits, 2 Channel Digitizer Data Sheet 02 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Fast, Flexible, High-Performance Control, Testing and Prototyping The M3302A combines high-performance arbitrary waveform generator channels and digitizer channels in the same module providing the ideal tool for testing and prototyping in control or communications applications. Performance meets simplicity thanks to easy-to-use programming libraries, real-time sequencing technology (Hard Virtual Instrumentation or HVI), and graphical FPGA programming technology. Features Outputs (AWG) –– 500 MSa/s, 16 Bits, 2 Channels Inputs (digitizer) –– 500 MSa/s, 14 Bits, 2 Channels Output features –– AWGs, function generators, AM/FM/PM modulators –– Advanced triggering and marking functionalities Input features –– Powerful data acquisition system (DAQ) –– Advanced triggering and marking functionalities Less than 400 ns input to output latency Optional HW programming for high-performance applications –– Real-time sequencing (HVI technology) –– FPGA programming –– Xilinx Kintex-7 325T or 410T FPGA Up to 2 GB of onboard RAM (~ 1 Gsamples) Mechanical/interface –– 2 slots 3U (PXIe) –– Up to 200 MB/s transfer BW with P2P capabilities –– Independent DMA channels for fast and efficient data transfer Applications General purpose AWGs & digitizers High-performance control Communications: BB/IF SDR, channel emulation, transceiver testing Aerospace & defense (A/D): RADAR, electronic warfare (EW) Hardware-in-the-loop (HIL), automated test equipment (ATE) Scientific research Quantum computing 03 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Programming technology and software tools Software programming –– Easy-to-use native programming libraries for most common languages: C, C++, Visual Studio, LabVIEW, MATLAB, Python, and more Hardware programming (optional) –– Real-time sequencing (Hard Virtual Instrumentation or HVI technology) –– Graphical flowchart-style M3601A design environment (-HV1 option required on HW) –– Ultra-fast, fully-parallelized, hard real-time execution –– Ultra-fast, time-deterministic decision-making –– Off-the-shelf inter-module synchronization & data exchange –– FPGA programming –– Graphical M3602A FPGA design environment (-FP1 option required on HW) –– No FPGA know-how required –– Include high-level to low-level design elements: off-the-shelf DSP blocks, MATLAB/ Simulink designs, Xilinx CORE Generator IP cores, Xilinx VIVADO/ISE projects, VHDL or Verilog code –– Ultra-fast, one-click compiling and on-the-fly programming No programming –– Ready-to-use SD1 SPF (software front panels) M31XX/M32XX/M33XX family product table Outputs (AWGs) Inputs (Digitizers) Product Type Speed (MSa/s) Bits Ch BW (MHz) M3202A AWG 1000 14 2/4 400 M3201A AWG 500 16 2/4 200 M3102A Speed (MSa/s) Bits Ch BW (MHz) Digitizer 500 14 2/4 200 M3100A Digitizer 100 14 4/8 200 M3302A Combo 500 16 2 200 500 14 2 200 M3300A Combo 500 16 2/4 200 100 14 4/8 200 04 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Functional block diagram Channel 1 Channel x Function generator (FGx) Channel 1 output Frequency Phase Amplitude Offset Angle modulator FM Dual arbitrary waveform generator (AWGx) Amplitude modulator AM DAC LPF Channel x output Quadrature modulator IQ Channel n Odd channels only Even channels only Channel n output Dual modulation option only Figure 1. M3302A output functional block diagram, all channels have identical output structure Channel 1 Channel 1 output Channel x Input settings Channel x output Full scale, Z, coupling (as available) Prescaler ÷ Data acquisition (DAQx) Analog trigger Channel n Channel n output Figure 2. M3302A input functional block diagram, all channels have identical input structure 05 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Ordering information Product Description M3302A Arbitrary waveform generator: 500 MSa/s, 16 Bits + digitizer: 500 MSa/s, 14 Bits Options Description M3302A-C22 Two channels AWG + Two channels DIG M3302A-CLV / -CLF Variable sampling clock / fixed sampling clock, low jitter M3302A-DM1 Dual modulation capability for the AWG (amplitude and angle simultaneously) M3302A-M01 / -M12 / -M20 Memory 16 MB, 8 MSamples / 128 MB, 60 MSamples / 2 GB, 1 GSamples HW programming options Description M3302A-HVI Enabled HVI programming, requires an HVI design environment license (M3601A) M3302A-FP1 Enabled FPGA programming, requires -K32 or -K41 option and an FPGA design environment license (M3602A) M3302A-K32 / -K41 FPGA, Xilinx 7K325T / 7K410T, required for -FP1 option only (needs memory option -M20) All options must be selected at time of purchase and are not upgradable These options represent the standard configuration Related software Description M3601A HVI design environment M3602A FPGA design environment 06 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Output specifications (AWG) Specifications summary M3302A-C22 Parameter Min Typ Max Units Comments Inputs and outputs Channels (single-ended mode) 2 Out Channels (differential mode) 1 Out clock 1 1 Out Reference clock 2 1 In Triggers/markers 1, 3 1 In/out Reconfigurable Triggers/markers 2, 3 8 In/out Reconfigurable Reference Differential uses 2 channels Output channels overview Sampling rate 4 0.005 Voltage resolution Output frequency 500 16 DC Real-time BW Output voltage –1.5 MSa/s Bits 200 MHz 200 MHz 1.5 Volts Built-in functionalities Function generators 2 1 per channel Dual AWGs 2 1 per channel IQ modulators 2 1 per channel Frequency modulators 2 1 per channel Phase modulators 2 1 per channel Amplitude modulators 2 1 per channel DC offset modulators 2 1 per channel Onboard memory RAM memory 1. 2. 3. 4. 16 2048 MBytes At front panel At backplane Markers available from firmware version v3.0 or later (-CLV) option: DC to 500 MSa/s; (-CLF) option: fixed 500 MSa/s Table 1. General specifications 07 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet I/O specifications M3302A-C22 Parameter Min Typ Max Units Comments 100 500 MSa/s 0 200 MHz Limited by a reconstruction filter –1.5 1.5 Volts On a 50 Ω load Output channels Sampling rate 1 Output frequency Output voltage Source impedance 50 Ω Reference clock output 10 to 12.52 Frequency MHz Generated from the internal clock, user selectable 800 mVpp On a 50 Ω load Power 2 dBm On a 50 Ω load Source impedance 50 Ω AC coupled Voltage External I/O trigger/marker VIH 2 5 V VIL 0 0.8 V VOH 2.4 3.3 V On a high Z load VOL 0 0.25 V On a high Z load Input impedance 10 KΩ Source impedance TTL – Speed 100 MHz 1. (-CLV) option: 100 to 500 MSa/s; (-CLF) option: fixed 500 MSa/s 2. CLF option is set to 10 MHz while with CLV option varies from 12.5 MHz to 10 MHz Table 2. Input/output specifications 08 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Function generators (FGs) specifications M3302A-C22 Parameter Min Typ Max Units Comments General specifications Function generators 2 – 1 per channel Waveform types 4 – Sinusoidal, triangular, square and DC Frequency range 0 200 MHz Frequency resolution 45 Bits Frequency resolution 5.7 µHz Phase range 0 360 Deg Phase resolution 24 Bits Phase resolution 21.5 µdeg Frequency change rate 100 MChanges/s With HVI technology Frequency modulation rate 500 MSamples/s With AWGs and angle modulators Phase change rate 100 MChanges/s With HVI technology Phase modulation rate 500 MSamples/s With AWGs and angle modulators Max Units Comments 1.5 Volts Amplitude + offset values Speed performance Table 3. Function generators (FGs) specifications Amplitude and offset specifications M3302A-C22 Parameter Min Typ General specifications Amplitude/offset range –1.5 Amplitude/offset resolution 16 Bits Amplitude/offset resolution 45.8 µV Amplitude/offset change rate 500 MChanges/s With HVI technology Amplitude/offset modulation rate 500 MSamples/s With AWGs and amplitude modulators Speed performance Table 4. Amplitude and offset specifications 09 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Arbitrary waveform generators (AWGs) specifications M3302A-C22 Parameter Min Typ Max Units Comments General specifications Dual AWGs 2 Aggregated speed (16 bits) Aggregated speed (32 bits) Waveform multiple 1 Dual AWG per output channel 2000 MSa/s For all onboard waveforms combined 1000 MSa/s For all onboard waveforms combined Samples Waveform length must be a multiple of this value 957M Samples Maximum depends on onboard RAM 478M Samples Maximum depends on onboard RAM % Effic. = waveform size/waveform size in RAM 5 16-bit waveform length 15 32-bit waveform length 10 Waveform length efficiency Trigger 93.5 Selec. External Trigger (input connector, backplane triggers), software trigger AWG specifications (16-bit single waveform) Speed 500 Resolution AWG destination 16 MSa/s Per AWG Bits Selec. Amplitude, offset, frequency or phase AWG specifications (16-bit dual waveform) Speed (waveform A) 500 MSa/s Per AWG Speed (waveform B) 500 MSa/s Per AWG Resolution (waveform A) Resolution (waveform B) 16 Bits 16 Bits AWG destination (waveform A) Selec. Amplitude, offset or I AWG destination (waveform B) Selec. Frequency, phase or Q AWG specifications (32-bit single waveform) Speed Resolution AWG destination 100 32 MSa/s Per AWG, minimum prescaler: 1 Bits Selec. Amplitude, offset, frequency or phase AWG specifications (32-bit dual waveform) Speed (waveform A) Speed (waveform B) 100 MSa/s Per AWG, minimum prescaler: 1 100 MSa/s Per AWG, minimum prescaler: 1 Resolution (waveform A) 32 Bits Resolution (waveform B) 32 Bits AWG destination (waveform A) Selec. Amplitude or offset AWG destination (waveform B) Selec. Frequency or phase Table 5. Arbitrary waveform generators (AWGs) specifications 10 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Angle modulators specifications M3302A-C22 Parameter Min Typ Max Units Comments General specifications Frequency modulators 2 1 per output channel Phase modulators 2 1 per output channel Carrier signal source FGs Modulating signal source Table 3 on page 8 AWGs Table 5 on the 9 Frequency modulators (16-bit modulating waveform) Deviation –Dev. gain Modulating signal resolution +Dev. gain 16 Modulating signal BW 0 Deviation gain 0 Deviation gain resolution MHz Bits AWG waveform 250 MHz AWG Nyquist limit 200 MHz 16 Bits Frequency modulators (32-bit modulating waveform) Deviation –Dev. gain Modulating signal resolution +Dev. gain 32 MHz Bits AWG waveform AWG Nyquist limit Modulating signal BW 0 50 MHz Deviation gain 0 200 MHz Deviation gain resolution 16 Bits Phase modulators (16-bit modulating waveform) Deviation –Dev. gain Modulating signal resolution +Dev. gain 16 Deg Bits AWG waveform AWG Nyquist limit Modulating signal BW 0 250 MHz Deviation gain 0 180 Deg Deviation gain resolution 16 Bits ~ 5.5 mdeg Phase modulators (32-bit modulating waveform) Deviation –Dev. gin Modulating signal resolution +Dev. gain 16 Deg Bits AWG waveform is truncated AWG Nyquist limit Modulating signal BW 0 50 MHz Deviation gain 0 180 Deg Deviation gain resolution Table 6. Angle modulators specifications 16 Bits ~ 5.5 mdeg 11 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Amplitude modulators specifications M3302A-C22 Parameter Min Typ Max Units Comments General specifications Amplitude modulators 2 1 per output channel Offset modulators 2 1 per output channel Carrier signal source Modulating signal source FGs Table 3 on page 8 AWGs Table 5 on page 9 Amplitude & offset modulators (16-bit modulating waveform) Deviation –Dev. gain Modulating signal resolution +Dev. gain 16 Modulating signal BW 0 Deviation gain 0 Deviation gain resolution Vp Bits AWG waveform 250 MHz AWG Nyquist limit 1.5 Vp 16 Bits Limited by the output DAC Amplitude & offset modulators (32-bit modulating waveform) Deviation –Dev. gain Modulating signal resolution +Dev. gain 16 Vp Bits AWG waveform is truncated AWG Nyquist limit Modulating signal BW 0 50 MHz Deviation gain 0 1.5 Vp Deviation gain resolution Table 7. Amplitude modulators specifications 16 Bits Limited by the output DAC 12 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet IQ Modulators Specifications M3302A-C22 Parameter Min Typ Max Units Comments General specifications IQ modulators 2 Carrier signal source Modulating signal source 1 per output channel FGs Table 3 on page 8 AWGs Table 5 on page 9 External I/O trigger/marker Amplitude deviation −1.5 Phase deviation −180 I modulating signal resolution I modulating signal BW Vp 180 Deg 16 0 Q modulating signal resolution Q modulating signal BW 1.5 250 16 0 Bits AWG waveform MHz AWG Nyquist limit Bits AWG waveform 250 MHz AWG Nyquist limit Max Units Comments 500 MHz Table 8: IQ modulators specifications Clock system specifications M3302A-C22 Parameter Min Typ General specifications Clock frequency 1 1. > 100 (-CLV) option: 100 to 500 MSa/s; (-CLF) option: fixed 500 MSa/s Table 9. Clock system specifications 13 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet AC performance M3302A-C22 Parameter Min Typ Max Units Comments General specifications Analog output jitter <2 ps RMS (cycle-to-cycle) AWG trigger to output jitter <2 ps RMS (cycle-to-cycle) for any trigger referenced to the chassis clock; independent of input trigger jitter if input jitter < 4nS peak-to-peak Trigger resolution 10 ns < 20 ps Between ch 0 & ch 1, and ch 2 & ch 3 < 50 ps Between any channel < 150 ps Between modules, chassis dependant 2 Clock output jitter <2 ps RMS (cycle-to-cycle) Clock accuracy and stability 100 ppm PXIe, cPCIe versions; chassis dependent 1. Channel-to-channel skew AC specifications Spurious-free dynamic range (SFDR) Pout = 4 dBm, measured from DC to max frequency fout = 10 MHz 70 dBc fout = 80 MHz 64 dBc fout = 120 MHz 65 dBc fout = 160 MHz 63 dBc < –105 dB fout = 80 MHz –75 dB fout = 120 MHz –88 dB fout = 160 MHz –73 dB fout = 10 MHz < –105 dB fout = 80 MHz –78 dB fout = 120 MHz < –105 dB fout = 160 MHz –92 dB Crosstalk (adjacent channels) fout = 10 MHz Crosstalk (non-adjacent channels) Phase noise (SSB) offset = 1 KHz < –127 dBc/Hz offset = 10 KHz < –133 dBc/Hz offset = 100 KHz < –138 dBc/Hz < –145 dBm/Hz Average noise power density 1. This value corresponds to a M9505A chassis. This value can be improved with an external chassis clock or a system timing module. 2. This value corresponds to a M9005A PXIe chassis. Table 10. AC performance 14 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet AC performance graphs Figure 3. Single-tone spectrum @ fout = 10 MHz Figure 6. Single-tone spectrum @ fout = 40 MHz Figure 4. Single-tone spectrum @ fout = 80 MHz Figure 7. Single-tone spectrum @ fout = 120 MHz Figure 5. Single-tone spectrum @ fout = 160 MHz Figure 8. Single-tone spectrum @ fout = 200 MHz 15 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Input specifications (digitizer) Specifications summary M3302A-C22 Parameter Min Typ Max Units Comments Inputs and outputs Channels 2 Out Reference clock 1 1 Out clock 2 Reference 1 In Triggers/markers1, 3 1 In/out Reconfigurable Triggers/markers 2, 3 8 In/out Reconfigurable 500 MSa/s Input channels overview Sampling rate 4 Voltage resolution Input frequency 14 0 Bits 200 MHz Real-time BW 200 MHz Time skew < 50 ps Between channels Built-in functionalities Input conditioning blocks 2 1 per channel Analog trigger processors 2 1 per channel Data acquisition blocks 2 1 per channel Onboard memory RAM memory 1. 2. 3. 4. 16 2048 MBytes At front panel At backplane Markers available from firmware version v3.0 or later (-CLV) option: 100 to 500 MSa/s; (-CLF) option: fixed 500 MSa/s Table 11. General specifications 16 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet I/O specifications Analog input characteristics Number of channels C22 Sampling rate 500 MSa/s option -CLF variable rate option -CLV Configurable inputs: impedance 50 Ω or 1 MΩ (HiZ) Configurable inputs: Coupling AC or DC Input voltage range (50 Ω) 125 mVpp to 8 Vpp (7 scales: 0.125, 0.25, 0,5, 1, 2, 4, 8 Vpp) Input voltage range (HiZ) 200 mVpp to 16 Vpp (7 scales: 0.2, 0.4, 0.8, 2, 4, 8, 16 Vpp) Bandwidth limit filters 200 MHz Effective number of bits (ENOB)1 10.6 bits @ 95 MHz (typical) Noise floor1 -146 dBm/Hz SINAD1 66 dB @ 95 MHz (typical) Spurious free dynamic range (SFDR) + Total Harmonic 1. Distorsion1 71 dBc @ 95 MHz (typical) measured at -1 DBFS input signal with 1 Vpp 50 Ω Table 12a. Input/output specifications M3302A-C22 Parameter Min Typ Max Units Comments 10 to 12.52 MHz Generated from the internal clock. User selectable Voltage 800 mVpp On a 50 Ω load Power 2 dBm On a 50 Ω load Source impedance 50 Ω AC coupled Reference clock output Frequency External I/O trigger/marker VIH 2 5 V VIL 0 0.8 V VOH 2.4 3.3 V On a high Z load VOL 0 0.25 V On a high Z load Input impedance 10 KΩ Source impedance TTL - Speed 100 MHz 2. CLF option is set to 10 MHz while with CLV option varies from 12.5 MHz to 10 MHz Table 12b. 17 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Data acquisition blocks (DAQs) specifications M3302A-C22 Parameter Min Typ Max Units Comments General specifications DAQs 2 1 per channel Aggregated speed 1000 Acquisition burst multiple 5 Acquisition RAM capacity 15 957M Acquisition RAM capacity effic. 93.5 Trigger MSa/s For all onboard DAQs combined Samples Burst length must be a multiple of this value Samples Maximum depends on onboard RAM % Effic. = waveform size/waveform size in RAM Selec. Hardware trigger (analog channels, input trigger, backplane triggers), Software trigger DAQ specifications Speed 500 Resolution 14 MSa/s Per DAQ Bits Table 13. Data acquisition blocks (DAQs) specifications Clock system specifications M3302A-C22 Parameter Min Max Units Comments Clock frequency (-CLF) 500 500 MHz Fixed clock Clock frequency (-CLV) 100 500 MHz Variable clock Units Comments Slots PXI Express (CompactPCI Express compatible) – Automatic gen negotiation, chassis dependent Lanes Automatic lane negotiation, chassis dependent General specifications Table 14. Clock system specifications System specifications Environmental specifications (PXI Express) M3302A-C22 Parameter Min Typ Max System bus Slots 2 PCI Express type Gen 1 Gen 2 PCI Express link 1 4 Power dissipation 3.3 V PXIe power supply 3 A ~ 10 W 12 V PXIe power supply 3.5 A ~ 40 W Table 15. Environmental specifications (PXI Express) 18 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Environmental Temperature range Operating Non-operating 0 to +55°C (10,000 feet) -40 to +70 °C (up to 15,000 feet) Max operative altitude 4000 m (10,000 feet) Operating Humidity range (%RH) 10 to 95% at 40 °C Non-operating Humidity range (%RH): 5 to 95 5 to 95% Calibration interval 1 year EMC Complies with European EMC Directive – IEC/EN 61326-1 – CISPR Pub 11 Group 1, class A This ISM device Compliace with Canadian ICES-001 Cet appareil ISM est conforme à la norme NMB-001 du Canada. This ISM device Compliace with Australian and New Zealand RCM This ISM device Compliace with South Korea EMC KCC Table 16. Environmental Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual and verified to be robust against the environmental stresses of Storage, Transportation and End-use; those stresses include but are not limited to temperature, humidity, shock, vibration, altitude and power line conditions. Test Methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3. 19 | Keysight | M3302A PXIe Arbitrary Waveform Generator and Digitizer Combo with Optional Real-Time Sequencing and FPGA Programming - Data Sheet Evolving Our unique combination of hardware, software, support, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. Keysight Services www.keysight.com/find/service Our deep offering in design, test, and measurement services deploys an industry-leading array of people, processes, and tools. The result? We help you implement new technologies and engineer improved processes that lower costs. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 11 2626 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-4-20-17) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2017 Published in USA, May 5, 2017 5992-1808EN www.keysight.com