EC870/EC871 SERIES ECLIPSE MAXI - LED 8” Pole/Wall mount TYPE: QUANTITY: PROJECT: CATALOG NUMBER: FIXTURE WATTAGE VOLTAGE FINISH OPTION OPTION OPTION OPTION EC870 1 2 3 1- 30” dia. (762) X 3/16“ (5) thick aluminum reflector disc with two sides painted white enamel. 2- Set of two cast aluminum supporting arms. 3- LED sealed optical beam control lens. 4- Cast aluminum LED heat sink. 5- Cast aluminum upper electrical housing. 6- Cast aluminum lower electrical housing. 4 EC871 5 6 MATERIALS Eclipse is made of corrosion resistant 356 aluminum alloy with a copper (CU) content of less than 0.1%. LED printed circuit board is assembled with a cast aluminum heat sink designed with fins pattern to optimize heat dissipation and luminaire efficacy. The structural support arms are made with a built-in wire way. The driver is enclosed in a separate cast aluminum chamber allowing a quick access for electrical maintenance without disturbing the optical light chamber. The lower cast aluminum housing fits on a 4” (102) or 5” (127) pole and contains all electrical controls on a removable tray. CERTIFICATION Tested to UL1598 and CSA 22.2 #250. ETL listed wet location. Photometric testing performed by an independent laboratory in accordance with IES LM-79-08 standards at 25ºC. Lumen depreciation in accordance with IESNA LM80 standards. CE certification on request. Rated IP65. 30” (762) ELECTRICAL LED DRIVER LED Standard driver is 0-10V dimming-ready (dims to 10%) with: 120277 multi-volt compatibility (50-60Hz), optional 347V on request, minimum operating temperature of -30ºC/-22ºF, output over voltage protection, output over current protection, output short circuit protection with auto-recovery, and over temperature protection (110ºC). 15º 27” (686) EC870 EPA: .70 EC871 EPA: 1.87 Standard 4000K/80CRI. Optional 2700K, 3000K and 3500K. Removable modular LED platform. LIFE 75,000hrs L86B50 (based on IESNA TM-21 Test Method and LM-80 data). 145,000hrs L70B50 (calculated projection from LM-80 data). FINISH Five-stage preparation process including preheating of cast parts for air extraction, and an environmentally friendly alloy sealant. Polyester powder coating is applied through an electrostatic process and oven cured for long term finish. Nov 2017 Rev 0 MOUNTING Maximum weight: 44lbs (20kg) Eclipse is designed for ease of access and installation. Standard luminaire fits on a 4” (102) or 5” (127) pole. Alternate poles or wall attachments are proposed with high quality components to meet multiple installation conditions. LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 1 EC870/EC871 SERIES ECLIPSE MAXI - LED TYPICAL PHOTOMETRY SUMMARY Outdoor report Descriptive Information Descriptive Information EC870-L1W65r1 EC871-L1W65r1 Total Lms: 5234 Lumens Total Input Watts: 60.5 W Source: LED Efficacy: 86.6 Lumens/Watt BUG: B2-U3-G2 CCT/CRI: 4000K/80 Maximum Candela: 1382 @ 25ºV Total Lms: 5158 Lumens Total Input Watts: 60.0 W Source: LED Efficacy: 85.9 Lumens/Watt BUG: B1-U3-G3 CCT/CRI: 4000K/80 Maximum Candela: 1615 @ 2.5ºH/42.5ºV Outdoor report Polar graph Polar graph Please visit our web site www.luminis.com for complete I.E.S. formatted download data. LUMINAIRE SELECTION MODEL# LED LIGHT SELECTION SUFFIX INPUT WATTS VOLTAGE DELIVERED LUMENS CRI CCT ºK 4000K L1W30R1 38W L1W48R1 51W L1W65R1 60W 3378 4412 5234 80 L1W30R1 38W L1W48R1 51W L1W65R1 60W 3340 4362 5158 80 1 FINISH STANDARD COLORS 120V 277V Optional 347V EC870 WHT BKT BZT MST GRT DGT CHT Snow white Jet black Bronze Matte silver Titanium gray Gun metal Champagne 4000K OPTIONAL COLORS CS Custom color RAL RAL# color EC871 (Refer to color chart) OPTIONS ELECTRICAL FS PH 347L MOUNTING Fuse Photocell 2 347V input power driver 2 LIGHT Alternate CCT ºK LED (LCF: Lumen conversion factor) K27 K3 K35 2700K CCT 80 CRI (LCF: 0.91) 3000K CCT 80 CRI (LCF: 0.94) 3500K CCT 80 CRI (LCF: 0.98) NOTE: Other CCT & higher CRI available, please consult factory. AC8 2AC8 AW8 Pole mount attachment with 45º support Double pole mount attachment with 45º support at 180º Wall mount attachment with 45º support EC8P Pole mount attachment with stacked arms 2EC8P Double pole mount attachment with stacked arms at 180º EC8W Wall mount attachment with stacked arms TN3 3” Tenon pole adaptor3 PR8 Pedestal mount adaptor ACCESSORIES SQ SQ15 30” Square aluminum white enamel reflector (EC870 only) 30” Square aluminum white enamel reflector with 15º tilt (EC871 only) LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. Nov 2017 Rev 0 NOTES 1- Luminaires are factory prewired for 120V (if no voltage is specified) For other voltages, please specify with catalog number or consult factory. 2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires (except for other types of mounting). 3- 3” tenon pole adaptor only required for 3” O.D. poles by others. LUMINIS.COM 2 EC870/EC871 SERIES ECLIPSE MAXI - LED POLE MOUNT 28” (711) 18” (457) 31.75” (807) 36” (914) 30” 17.75” (762) (451) 36” (914) 8” Dia. (203) base 4” (102) dia. Power feed opening 6” (152) dia. Bolt circle 12” (304) Power feed AC8 1” X 3” (25x76) extruded aluminum extended arm pole mounting adaptor designed to fit with 4 or 5” dia. poles. 1/2” dia. X 45º standard natural stainless steel rod support. (EPA: 0.7) EC8P Set of (2) 1” X 3” (25x76) extruded aluminum side pole straight mounting. Pole mounting adaptor fits with 4 or 5” dia. poles. (EPA: 0.97) PR8 8” Dia.(203) X 8 3/4” (222)H. extruded aluminum stand designed for short walls or pier mount. 2EC8P Double pole mount attachment with 2 stacked arms at 180º 2AC8 Double pole mount attachment with 45º support at 180º NOTE: Power feed PST pole with AC8 or 2AC8 attachment requires a 30” (762) tenon extension over pole nominal height. EC8P and 2EC8P require an 18” tenon extension. Factory installed. MATCHING POLE SELECTION Ø 4” Ø 5” Ø 4” Tapered Pole Ø 4” Height PAA410 PAA510 PST10 ------- PSB10 10 Ft. (3 M) PAA412 PAA512 PST12 ------- PSB12 12 Ft. (3,6 M) PAA414 PAA514 PST14 ------- PSB14 14 Ft. (4,2 M) PAA416 PAA516 PST16 PTA16 PSB16 16 Ft. (4,8 M) PAA418 PAA518 ------- PTA18 PSB18 18 Ft. (5,5 M) PAA420 PAA520 ------- PTA20 PSB20 20 Ft. (6,0 M) ------- ------- ------- PTA25 ------- 25 Ft. (7,6 M) PSB Pole series LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvements or discontinued without prior notice. PST Pole series Nov 2017 Rev 0 For additional pole details, please refer to separate pole specification sheet. Ø 4”= 100mm Ø5”= 127mm PAA Pole series LUMINIS.COM 3 EC870/EC871 SERIES ECLIPSE MAXI - LED WALL MOUNT 28” (711) 18” (457) 36” (914) 36” (914) Power feed Power feed AW8 1” X 3” (25X76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia. X 45º standard natural stainless steel rod support. EC8W Set of (2) 1” X 3” (25X76) extruded aluminum wall mount arms with cast aluminum wall plate. Mounting Mounting 3” (76) 3” (76) 4.625” (118) 17.75” (451) 6.125” (156) 4.625” (118) Power feed Power feed ACCESSORIES SQ15 (EC871 only) 30”X30” X 3/16” thick aluminum square reflector plate with 15º tilt. Two sides painted white enamel. Luminaire EPA: 2.17 Nov 2017 Rev 0 SQ (EC870 only) 30”X30” X 3/16” thick aluminum square reflector plate. Two sides painted white enamel. Luminaire EPA: 0.75 LUMINIS Toll free: 866.586.4647 Fax: 514.683.8872 260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5 Luminaires may be altered for design improvement or discontinued without prior notice. LUMINIS.COM 4