DF2005S thru DF210S SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS SINGLE-PHASE GLASS BRIDGE REVERSE VOLTAGE - 50 TO 1000 VOLTS FORWARD CURRENT - 2.0 AMPERES FEATURES MECHANICAL DATA Rating to 1000V PRV Ldeal for printed circuit board Low forward voltage drop,high current capability Reliable low cost construction utilizing molded Plastic technique results in inexpensive product Lead in plated copper The plastic material has UL flammability Classification 94V-0 Polarity As marked on body Weight 0.02 ounce, 0.38gram Mounting position Any MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temp. unless otherwise specified Single phase, half sine wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% DF 2005S DF 201S DF 202S DF 204S DF 206S DF 208S DF 210S UNITS 1000 Volts Volts Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 Maximum RMS Bridge input Voltage VRMS 35 70 140 280 420 560 700 Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Rectified Current @ TA=400C I (AV) 2.0 Amps Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 60 Amps Maximum Forward Voltage at 2.0A DC VF 1.1 Volts Maximum DC Reverse @TJ=25 C at rated DC Blocking Voltage @TJ=1250C IR 10 500 A I2 t Rating for fusing (t<8.3ms) I2 t 10.4 A2S CJ 25 0 Typical Junction capacitance per element (Note 1) Typical Thermal resistance (Note 2) Operating Temperature Range Storage Temperature Range R 40 JA Volts pF 0 C/W TJ -55 to +150 0 TSTG -55 to +150 0 NOTES 1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts DC 2. Thermal Resestance From Junction to Ambient and from junction to lead mounted on P.C.B with 0.5 x 0.5 (13x13mm) copper pads. www.paceleader.tw 1 C C DF2005S thru DF210S SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS SINGLE-PHASE GLASS BRIDGE REVERSE VOLTAGE - 50 TO 1000 VOLTS FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 PEAK FORWARD SURGE CURRENT, AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES 2.0 FORWARD CURRENT - 2.0 AMPERES SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 100 50 50 40 30 20 SINGLE SINE-WAVE JEDEC METHOD 10 0 1 150 2 FIG.3-TYPICAL JUNCTION CAPACITANCE 10 20 50 100 FIG.4-TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT,(A) 10 10 TJ=25°C,f=1MHZ 1.0 0.1 1.0 4.0 10.0 1.0 0.1 T J=25°C PULSE WIDTH:300us 2% DUTY CYCLE 0.01 100 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 100 T J=125°C 10 1.0 T J=25°C 0.1 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) www.paceleader.tw 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT,(µA) CAPACITANCE(pF) 5 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE ,°C 2 140 1.8