CCF02 (CCF-2) Vishay Dale Metal Film Resistors, Industrial Power, Flameproof FEATURES • Small size suitable for 1/2, 1 & 2 watt applications • High power rating, small size • Flameproof, high temperature coating meets EIA RS-325-A • Excellent high frequency characteristics • Low noise • Low voltage coefficient • Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA-296-E) • Lead (Pb)-free version is RoHS Compliant Pb-free Available e3 RoHS* COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL CCF02 POWER RATING P70 °C CCF-2 TEMPERATURE COEFFICIENT TOLERANCE RESISTANCE RANGE W LIMITING ELEMENT VOLTAGE MAX. V쓖 ppm/°C % Ω 2.0 350 100 ± 1, ± 5 4R99 - 1M UNIT CCF02 Rated Dissipation at 70 °C W 2.0 Maximum Working Voltage V쓖 Insulation Voltage (1 min) Dielectric Strength 96 for 1 % tolerance 24 for 5 % tolerance MATERIAL SPECIFICATIONS TECHNICAL SPECIFICATIONS PARAMETER E-SERIES Element: Proprietary nickel-chrome film ≤ 350 Solderability: Satisfactory per MIL-STD-202, Method 208. Veff > 500 Core: Fire-cleaned high purity ceramic VAC 900 Termination: Standard lead material is solder-coated copper. Solderable and weldable per MIL-STD-1276, Type C. 11 Insulation Resistance Ω ≥ 10 Operating Temperature Range °C - 65 / + 230 Terminal Strength (pull test) lb 2 Failure Rate -9 10 /h <1 Weight (max) g 0.35 MARKING - 5 band colorband for ± 1 % - 4 band colorband for ± 5 % GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CCF02301RFKR36 (preferred part numbering format) C C F 0 2 GLOBAL MODEL RESISTANCE VALUE CCF02 R = Decimal K = Thousand M = Million 4R99 = 4.99 Ω 680K = 680 k Ω 1M00 = 1.0 MΩ 3 0 1 TOLERANCE CODE F=±1% J=±5% R F K TEMPERATURE COEFFICIENT K = 100 ppm R 3 6 PACKAGING SPECIAL E36 = Lead Free, T/R (2500 pcs) R36 = Tin/Lead, T/R (2500 pcs) Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable Historical Part Number example: CCF-23010F (will continue to be accepted) CCF-2 3010 F R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 84 For Technical Questions, contact [email protected] Document Number: 31012 Revision 02-Feb-06 CCF02 (CCF-2) Vishay Dale Metal Film Resistors, Industrial Power, Flameproof DIMENSIONS in inches [millimeters] 0.344 ± 0.031 [8.74 ± 0.79] 0.425 [10.80] MAX. RATED POWER IN % 120 0.145 ± 0.015 [3.68 ± 0.38] Surface temperatures were taken with an infrared pyrometer in + 25 °C still air. 100 80 Resistors were supported by their leads in test clips at a point 0.5" [12.70 mm] out from the resistor body ends. 60 40 20 0 - 65 - 50 - 25 0.032 ± 0.002 [0.81 ± 0.05] 0 25 50 75 70 DERATING 100 125 150 250 SURFACE TEMP. (°C) ABOVE AMBIENT (°C) 1.030 ± 0.130 [26.16 ± 3.30] 200 150 100 50 0 1 2 3 4 5 APPLIED POWER (WATTS) 175 200 225 250 AMBIENT TEMPERATURE IN ˚C SURFACE TEMPERATURE vs POWER PERFORMANCE TEST MAX. ∆R (Typical Test Lots) Thermal Shock ± 1.0 % Short Time Overload ± 0.5 % Low Temperature Operation ± 0.5 % Moisture Resistance ± 1.5 % Resistance to Soldering Heat ± 0.5 % Shock ± 0.5 % Vibration ± 0.5 % Terminal Strength ± 0.5 % Dielectric Withstanding Voltage ± 0.5 % Life ± 2.0 % Document Number: 31012 Revision 02-Feb-06 For Technical Questions, contact [email protected] www.vishay.com 85 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1