Datatronic DR357-3-683 Shielded smd inductor dr357-3 sery Datasheet

August 3, 2011
SHIELDED SMD INDUCTOR DR357-3 SERIES
Features





Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 1.3µH to 330.0µH
Operating Temp. -40°C to +105°C
Tinned Leads with Leaded Solder is Available (note 6)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part No.
DR357-3-132
DR357-3-252
DR357-3-382
DR357-3-522
DR357-3-702
DR357-3-103
DR357-3-153
DR357-3-223
DR357-3-333
DR357-3-473
DR357-3-683
DR357-3-104
DR357-3-154
DR357-3-224
DR357-3-334
Inductance
(H)  30%
1.3
2.5
3.8
5.2
7.0
10.0
15.0
22.0
33.0
47.0
68.0
100.0
150.0
220.0
330.0
DCR
() Max.
0.008
0.010
0.013
0.022
0.027
0.035
0.050
0.073
0.093
0.128
0.213
0.304
0.506
0.756
1.090
I rated
(A) Max.
10.00
7.50
6.00
5.50
4.80
4.40
3.60
2.90
2.30
2.10
1.50
1.35
1.15
0.92
0.70
MECHANICAL OUTLINES
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.2mm, unless other specified
3. Inductance Test: 100kHz, 0.1Vrms
4. Irated for an approximate 40C temperature rise
5. Irated for an approximate 35% drop maximum of the initial value
6. For non-RoHS parts, replace DR prefix with 42- (e.g. DR357-3 becomes 42-357-3)
7. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specification are subject to change without notice.