Card Connectors Series CF Compact Flash Card Reader, Type I and II (w. and w/o Ejector) Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Current Rating: Operating Temp. Range: Reflow Solder Temp.: Mating Cycles: 1000MΩ at 500V DC 500Vrms 0.5A -55°C to +85°C 220°C min. / 60 sec, 260°C peak 10,000 times Materials and Finish Insulator: SMT Metal: Push Button: Cover: Contacts: Plating: LCP, glass filled (UL94V-0) Brass, pure Sn Glass reinforced PBT (UL94V-0) Stainless Steal Brass Contacts - Gold (15µ“) over Nickel (40µ“) Solder Tails - pure Sn Features Adapter for Compact Flash Card Type I and II With push button ejector (optional) Outline Dimensions (No Stand-off) CF 050 P2 - * 0 3 - * 0 - DS 2 Series No. of Contacts Stand-off Height: 0 = without 1 = 2.20mm 0 = Top Mounted on PCB 3 = 90° SMT Ejector: 0 = Without 1 = Right Side Plating Area: Contacts: Gold (15µ“) over 40µ“ Nickel Solder Tails: 100µ“ Tin over 40µ“ Nickel No Mark = Without Cap 2 = With Metal Cap for Automatic Assembly Recommended PCB Layout Interface Dim. L (Length) Power = 5.00mm Pin# 1, 13, 38, 50 General = 4.25mm all other pins Detect = 3.50mm Pin# 25, 26 Outline Dimensions (Ejector Option) Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Specifications Part Number (Details) Insulation Resistance: 1000MΩ at 500V DC Withstanding Voltage: 500Vrms Current Rating: 1A AC/DC max. Contact Resistance: 40mΩ max. at 20mV max. Operating Temp. Range: -55°C to +85°C Reflow Solder Temp.: 220°C min. / 60 sec, 260°C peak Mating Cycles: 10,000 times CF Materials and Finish Insulator: SMT Metal: Push Button: Cover: Contacts: Plating: LCP, glass filled (UL94V-0) Brass, pure Sn Glass reinforced PBT (UL94V-0) Stainless Steel Brass Contacts - Gold (15µ“) over Nickel (40µ“) Solder Tails - pure Sn Features Adapter for Compact Flash Card type I and II Reversed type, for assembly underneath the PCB Outline Dimensions Card Connectors 050 P2 - 0 1 3 - * 0 DS 2 Series No. of Contacts Stand-off Height 0 = Without 1 = Bottom Mounted on PCB 3 = 90° SMT Ejector: 0 = Without 1 = Right Side Plating Area: Contacts: Gold (15µ“) over 40µ“ Nickel Solder Tails: 100µ“ Tin over 40µ“ Nickel No Mark = Without Cap 2 = With Metal Cap for Automatic Assembly Recommended PCB Layout Interface Dim. L (Length) Power = 5.00mm Pin# 1, 13, 38, 50 General = 4.25mm all other pins Detect = 3.50mm Pin# 25, 26 Outline Dimensions (Ejector Option) SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Connectors Compact Flash Card Reader Series CF Compact Flash Card Reader, Type I and II (Reversed Type)