DF2005 thru DF210 SURFACE MOUNT GLASS PASSIVATED BRIDEG RECTIFIERS REVERSE VOLTAGE - 50 to 1000Volts FORWARD CURRENT - 2.0 Amperes . DF FEATURES .335(8.5) .307(7.8) ●Rating to 1000V PRV ●Ideal for printed circuit board ●Low forward voltage drop,high current capability .031(0.8) .023(0.6) ●Reliable low cost construction utilizing molded plastic .256(6.5) .244(6.2) technique results in inexpensive product ●Lead tin Pb/Sn copper ●The plastic material has UL flammability .350(8.9) .311(7.9) classification 94V-0 .323(8.2) .315(8.0) MECHANICAL DATA .079(2.0) .059(1.5) .102(2.6) .089(2.2) ●Polarit:As marked on Body ●Weight:0.02 ounces,0.38 gras ●Mounting position:Any .193(4.9) .165(4.2) .022(0.55) .018(0.45) .205(5.2) .197(5.0) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% Maximum Recurrent Peak Reverse Voltage VRRM DF 2005 50 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V CHARACTERISTICS Maximum DC Blocking Voltage Maximum Average Forward SYMBOL DF 201 100 DF 202 200 DF 204 400 DF 206 600 DF 208 800 DF 210 1000 UNIT V I(AV) 2.0 A IFSM 60 A VF 1.1 V IR 10 500 uA I2t Rating for Fusing (t<8.3ms) I2t 10.4 A2s Typical Junction capacitance Per Element(Note1) CJ 25 pF RθJC 40 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Rectified Current @TA=40℃ Peak Forward Surage Current 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC .Method) Maximum Forward Voltage at 2.0A DC Maximum DC Reverse Current @TJ=25℃ at Rated DC Blocking Voltage @TJ=125℃ Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range Note:1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC 2.Thermal resistance from junction to ambient mounted on P.C.B with 0.5*0.5"(13*13mm) copper pads. ~ 233 ~ RATING AND CHARACTERISTIC CURVES DF2005 thru DF210 FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT AVERAGE AMPERES 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 100 50 60 50 40 30 T A=25℃ SINGLE SINE-WAVE JEDEC METHOD 20 10 0 10 1 150 NUMBER OF CYCLES AT 60HZ AMBIENT TEMPERATURE ,℃ FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT,(A) 10 10 TJ=25℃,f=1MHZ 1.0 1.0 0.1 T J=25℃ PULSE WIDTH:300us 2% DUTY CYCLE 0.01 0.1 1.0 4.0 10.0 100 0 REVERSE VOLTAGE,(VOLTS) 0.2 0.4 0.6 100 T J=125℃ 10 1.0 T J=25℃ 0.1 0.01 0 20 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT,(µA) CAPACITANCE(pF) 100 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) ~ 234 ~ 140 1.8