Shoulder HDF115A5D Shoulderâ s saw filter series have broad line up products meeting all broadcast standard including ntsc,pal and secam systems. Datasheet

规格书编号
SPEC NO :
产品 规 格书
SPECIFICATION
CUSTOMER 客 户:
PRODUCT 产 品:
SAW FILTER
MODEL NO 型 号:
HD BF115A SIP5D
PREPARED 编 制:
CHECKED 审 核:
APPROVED 批 准:
D A T E 日 期:
2011-2-22
客户确认 CUSTOMER RECEIVED:
审核 CHECKED
批准 APPROVED
日期 DATE
无锡市好达电子有限公司
Shoulder Electronics Limited
www.shoulder.cn
Tel:0755-82916880 Fax:0755-82916881
E-mail:[email protected]
Page 1 of 7
SAW FILTER
HD BF115A SIP5D
更改历史记录
History Record
更改日期
Date
www.shoulder.cn
规格书编号
Spec. No.
产品型号
Part No.
客户产品型号
Customer No.
Tel:0755-82916880 Fax:0755-82916881
更改内容描述
Modify Content
E-mail:[email protected]
备注
Remark
Page 2 of 7
SAW FILTER
HD BF115A SIP5D
1.SCOPE
SHOULDER’s SAW filter series have broad line up products meeting all
broadcast standard including NTSC,PAL and SECAM systems. These filters are composed
of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in
electronic equipments such as TV and so on.
2.Construction
2.1 Dimension and materials
Manufacturer’s name : SHOULDER ELECTRONICS Co. LTD(CHINA)
Type : HD BF115A
www.shoulder.cn
Tel:0755-82916880 Fax:0755-82916881
E-mail:[email protected]
Page 3 of 7
SAW FILTER
HD BF115A SIP5D
2.2. Circuit construction, measurement circuit
3.Characteristics
Items
Standard
atmospheric
conditions
Conditions
Unless otherwise specified , the standard rang of
atmospheric conditions for making
measurements and tests is as follows;
Ambient temperature
: 15℃ to 35℃
Relative humidity
: 25% to 85%
Air pressure
: 86kPa to 106kPa
Operating
temperature rang
Operating temperature rang is the rang of ambient
temperatures in which the filter can be
operated continuously. -20℃ ~ +60℃
Storage
temperature rang
Storage temperature rang is the rang of ambient
temperatures at which the filter can be stored
without damage.
Conditions are as specified elsewhere in these
specifications. -40℃ ~ +70℃
Specifications
There shall be no
damage.
Reference
+25℃
temperature
3.1 Maximum Rating
DC voltage
AC voltage
www.shoulder.cn
VDC
Vpp
12
10
Tel:0755-82916880 Fax:0755-82916881
V
V
Between any terminals
Between any terminals
E-mail:[email protected]
Page 4 of 7
SAW FILTER
HD BF115A SIP5D
3.2 Electrical Characteristics
Source impedance
Zs=50Ω
Load impedance
ZL=50Ω
Item
Freq
Center frequency
Fo
Insertion attenuation
115.24MHz
Reference level
114.0~116.5
Amplitude(p-p)
min
-
typ
115.24
21.0
22.5
Relative attenuation
24.0
0.6
MHz
Pass bandwidth
TA=25℃
max
-
dB
dB
B1.5dB
B15dB
B30dB
-
2.9
3.9
4.4
-
MHz
MHz
MHz
105.0~111.0
MHz
40.0
45.0
-
dB
111.0~112.5
MHz
35.0
45.0
-
dB
118.0~119.5
MHz
36
46.0
-
dB
119.5~125.0
MHz
40
45
-
dB
38.0
48.0
-
dB
Reflected wave signal suppression
1.5μs…6.0μs after main pulse
(Test pulse 250 μ s, carrier
frequency 115.24MHz)
Group delay ripple(p-p)
113,79~116.69
Impedance at 36.00MHz
Input: Zin =Rin //Cin
Output: Zout=Rout//Cout
70
ns
0.2//16.0
0.1//23.4
KΩ//pF
KΩ//pF
Temperature coefficient
-18
3.3 Environmental Performance Characteristics
Item
Condition
High
The specimen shall be store at a temperature of
temperature
80±2℃ for 96±4h. Then it shall be subjected to
standard atmospheric conditions for 1h, after
which measurement shall be made within 1h.
Low
The specimen shall be store at a temperature of
temperature
-20±3℃ for 96±4h. Then it shall be subjected to
standard atmospheric conditions for 1h, after
which measurement shall be made within 1h.
Humidity
The specimen shall be store at a temperature of
www.shoulder.cn
MHz
Tel:0755-82916880 Fax:0755-82916881
E-mail:[email protected]
ppm/k
Specifications
Mechanical
characteristics and
specifications
in
electrical
characteristics shall
Page 5 of 7
SAW FILTER
Thermal
shock
Resistance to
Soldering
heat
HD BF115A SIP5D
40±2℃ with relative humidity of 90% to 96%
for 96±4h. Then it shall be subjected to standard
atmospheric conditions for 1h, after which
measurement shall be made within 1h.
The specimen shall be subjected to 8 continuous
cycles each as shown below. Then it shall be
subjected to standard atmospheric conditions for
1h, after which measurement shall be made
within 1h.
Temperature
Duration
1
+25 ℃=>-40 ℃ 0.5h
2
-40 ℃
4h
3
-40 ℃=>+85 ℃ 2h
4
+85 ℃
4h
5
+85 ℃=>+25 ℃ 0.5h
6
+25 ℃
1h
Reflow soldering method
Peak: 255 ±5 ℃, 220 ±5 ℃, 40s
At electrode temperature of the specimen.
be satisfied. There
shall
be
no
excessive change in
appearance.
The specimen shall be passed through the reflow
furnace with the condition shown in the above
profile for 1 time.
The specimen shall be stored at standard
atmospheric conditions for 1h, after which the
measurement shall be made. Test board shall be
1.6 mm thick. Base material shall be glass fabric
base epoxy resin.
Solder ability Immerse the pins melt solder at 260℃+5/-0℃ More then 95% of
for 5 sec.
total area of the
pins should be
covered with solder
www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected]
Page 6 of 7
SAW FILTER
HD BF115A SIP5D
3.4 Mechanical Test
Items
Conditions
Vibration
600-3300rpm amplitude 1.5mm
3 directions 2 H each
Drop
On maple plate from 1 m high 3 times
Lead pull
Pull with 1 kg force for 30 seconds
Lead bend
90o bending with 500g weigh 2 times
3.5 Voltage Discharge Test
Item
Condition
Surge
Between any two electrode
Specifications
There shall be no
damage.
Specifications
There shall be no
damage
3.6 Frequency response
www.shoulder.cn
Tel:0755-82916880 Fax:0755-82916881
E-mail:[email protected]
Page 7 of 7
Similar pages