HDSM-431x/433x 0.39” (10.0mm) Single digit surface mount LED display Data Sheet Description Features This is 0.39” (10.0mm) height single digit display. This device utilizes AlInGaP / GaAs chips.This device is with top surface gray and white segments. x 0.39” digit height x Low current operation x Excellent characters appearance x Available in CA and CC x 1000 pieces per reel x Moisture Sensitivity Level: Level 3 x RoHS compliant Ordering Information Red Green Yellow Orange Description HDSM-431C HDSM-431H HDSM-431F HDSM-431L Common Anode, Right Hand Decimal HDSM-433C HDSM-433H HDSM-433F HDSM-433L Common Cathode, Right Hand Decimal Package Dimensions Note: 1. All dimensions are in millimeters. 2. Tolerance are +/- 0.25mm unless otherwise specified. Pin Connection (Common Anode) Pin Connection (Common Cathode) PIN No Connection PIN No Connection 1 Cathode E 1 Anode E 2 Cathode D 2 Anode D 3 Common Anode 3 Common Cathode 4 Cathode C 4 Anode C 5 Cathode DP 5 Anode DP 6 Cathode B 6 Anode B 7 Cathode A 7 Anode A 8 Common Anode 8 Common Cathode 9 Cathode F 9 Anode F 10 Cathode G 10 Anode G Internal Circuit Diagram (Common Anode) Internal Circuit Diagram (Common Cathode) $ % & ' ( ) * $ '3 % & ' ( ) * '3 Absolute Maximum Ratings @ TA=25° Parameter 2 Green/Yellow/Red/Orange Unit Power Dissipation Per Segment 65 mW Peak Forward Current Per Segment (1/10 Duty Cycle. ,0.1ms pulse width) 100 mA Continuous Forward Current Per Segment Derating Linearly From 25°C Per Segment 25 mA 0.25 mA/ °C Reverse Voltage Per Segment 5 V Operating Temperature Range -40°C to +105°C Storage Temperature Range -40°C to +105°C Electrical / Optical Characteristics @ TA=25°C Green Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 5.4 9 - Mcd IF = 10mA Emissions Wavelength Op/Od - 572/571 - Nm IF = 20mA Spectral Line Half-Width 'O - 20 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 15 - Mcd IF = 10mA Emissions Wavelength Op/Od - 591/589 - Nm IF = 20mA Spectral Line Half-Width 'O - 15 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Parameters Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 14.3 - Mcd IF = 10mA Emissions Wavelength Op/Od - 644/630 - Nm IF = 20mA Spectral Line Half-Width 'O - 20 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.0 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - - 2:1 - IF = 10mA Symbol Min Typ Max Unit Test Condition Average Luminous Intensity IV 8.6 16 - Mcd IF = 10mA Emissions Wavelength Op/Od - 611/605 - Nm IF = 20mA Spectral Line Half-Width 'O - 17 - Nm IF = 20mA Forward Voltage, Per Segment VF - 2.1 2.6 V IF = 20mA Reverse Current, Per Segment IR - 100 PA VR = 5V Luminous Intensity Matching Ratio IV-M - 2:1 - IF = 10mA Yellow Red Orange Parameters 3 - Typical Electrical / Optical characteristic curves @ TA=25°C Green * 5HODWLYH/XPLQRXV,QWHQVLW\ 1RUPDOL]HGWRDWP$ 5HODWLYH/XPLQRXV,QWHQVLW\ * :DYHOHQJWK QP )RUZDUG&XUUHQW,) P$ Figure 2. Relative Luminous Intensity vs. Forward Current )RUZDUG&XUUHQW,) P$ )RUZDUG&XUUHQW,) P$ Figure 1. Relative Luminous Intensity vs. Wavelength * * $PELHQW7HPSHUDWXUH & Figure 3. Allowable DC Current vs. Ambient Temperature 4 )RUZDUG9ROWDJH 9 Figure 4. Forward Current vs. Forward Voltage Yellow 5HODWLYH,QWHQVLW\ 1RUPDOL]HGWRDWP$ 5HODWLYH,QWHQVLW\ :DYHOHQJWK QP Figure 2. Relative Intensity vs. Forward Current )RUZDUG&XUUHQW,) P$ )RUZDUG&XUUHQW,) P$ )RUZDUG&XUUHQW,) P$ Figure 1. Relative Intensity vs. Wavelength $PELHQW7HPSHUDWXUH & Figure 3. Allowable DC Current vs. Ambient Temperature 5 )RUZDUG9ROWDJH 9 Figure 4. Forward Current vs. Forward Voltage Red 5 5HODWLYH/XPLQRXV,QWHQVLW\ 1RUPDOL]HGWRDWP$ 5HODWLYH/XPLQRXV,QWHQVLW\ 5 :DYHOHQJWK QP )RUZDUG&XUUHQW,) P$ )RUZDUG&XUUHQW,) P$ Figure 2. Relative Luminous Intensity vs. Forward Current 5 5 $PELHQW 7HPSHUDWXUH & Figure 3. Allowable DC Current vs. Ambient Temperature 6 )RUZDUG&XUUHQW,) P$ Figure 1. Relative Luminous Intensity vs. Wavelength )RUZDUG 9ROWDJH 9 Figure 4. Forward Current vs. Forward Voltage Orange 5HODWLYH,QWHQVLW\ 1RUPDOL]HGWRDWP$ 5HODWLYH,QWHQVLW\ :DYHOHQJWK QP Figure 2. Relative Intensity vs. Forward Current )RUZDUG&XUUHQW,) P$ )RUZDUG&XUUHQW,) P$ )RUZDUG&XUUHQW,) P$ Figure 1. Relative Intensity vs. Wavelength $PELHQW7HPSHUDWXUH & Figure 3. Allowable DC Current vs. Ambient Temperature 7 )RUZDUG9ROWDJH 9 Figure 4. Forward Current vs. Forward Voltage Intensity Bin Limits (mcd) Green IV Bin Category Red Min. Max. IV Bin Category Min. Max. M 5.401 8.6 N 8.601 13.7 N 8.601 13.7 P 13.701 21.80 P 13.701 21.8 Q 21.801 34.7 Tolerance: ±15% Tolerance: ±15% Yellow Orange IV Bin Category Min. Max. IV Bin Category Min. Max. N 8.601 13.7 N 8.601 13.7 P 13.701 21.80 P 13.701 21.80 Q 21.801 34.7 Q 21.801 34.7 R 34.701 55.2 Tolerance: ±15% Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. Recommended soldering pattern (unit: mm) SMT Soldering Profile Pb free reflow soldering Profile TEMPERATURE 10 - 30 SEC. 217°C 200°C 245°C 3°C/SEC. MAX. 12.8 6°C/SEC. MAX. 150°C 3°C/SEC. MAX. 1.4 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Notes: 1. The peak temperature refers to the peak package body temperature. 2. Number of reflow process shall be limited to maximum 2 times only. Cooling process to normal temperature is required between first and second soldering process. 8 2.6 1.9 x 4 = 7.6 Recommended stencil window opening is 80% Tape specification (unit: mm) For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-0708EN - March 17, 2011