MAIA-007150-000100 Vector Modulator, 1.94 to 2.24 GHz Rev. V3 Features • • • • • • • • • • • Functional Schematic Operates 1.94 to 2.24 GHz Low Amplitude Ripple Linear Phase 50 Ohm nominal impedance Continuously Variable Across a Full 360 degree range Test Boards to be Available Lead-Free 4x6 mm PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of SA90-0001 Description M/A-COM's MAIA-007150-000100 is a Vector Modulator that significantly reduces the required board space compared to hybrid solutions. The monolithic passive elements will lead to greater repeatability lot-to-lot. Low amplitude ripple will provide superior performance. High intercept and compression points will contribute to more linear system performance. MAIA-007150-000100 is ideally suited for wireless infrastructure applications. Pin Configuration Pin No. Function Pin No. Function 1 NC 17 NC 2 NC 18 NC 3 NC 19 NC 4 NC 20 NC 5 NC 21 NC 6 NC 22 NC 7 NC 23 NC 8 NC 24 BIAS 2B 9 BIAS 1A 25 NC 10 NC 26 GND 11 GND 27 RF OUT 12 RF IN 28 GND 13 GND 29 NC 14 NC 30 BIAS 1B 15 BIAS 2A 31 NC 16 NC 32 NC M/A-COM’s MADR-007131-000100 Dual Linearizer is designed to simplify the control of Vector Modulators. See Figure 1 and App Note AN3001. Ordering Information Part Number Package MAIA-007150-000100 Bulk Packaging MAIA-007150-0001TR 1000 piece reel MAIA-007150-0001TB Sample Test Board Note: Reference Application Note M513 for reel size information. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAIA-007150-000100 Vector Modulator, 1.94 to 2.24 GHz Rev. V3 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max Impedance — — Ω — 50 — Reference Loss Z = 50Ω 1.94—2.34 GHz dB -13.5 — -10.0 Attenuation Range Z = 50Ω Above Reference Loss 1.94—2.34 GHz dB 10 — — Phase Shift Range Z = 50Ω, Over minimum Attenuation Range 1.94—2.34 GHz deg 0 — 360 Amplitude Ripple Z = 50Ω, Ref Loss Z = 50Ω, 5 dB above Ref Loss Z = 50Ω, 10 dB above Ref Loss Z = 50Ω, Ref Loss Z = 50Ω, 5 dB above Ref Loss Z = 50Ω, 10 dB above Ref Loss 2.08—2.20 GHz 2.08—2.20 GHz 2.08—2.20 GHz 2.04—2.24 GHz 2.04—2.24 GHz 2.04—2.24 GHz dB dB dB dB dB dB — — — — — — — — — — — — ±0.2 ±0.25 ±0.3 ±0.35 ±0.4 ±0.5 Deviation from Linear Phase Z = 50Ω, Ref Loss Z = 50Ω, 5 dB above Ref Loss Z = 50Ω, 10 dB above Ref Loss Z = 50Ω, Ref Loss Z = 50Ω, 5 dB above Ref Loss Z = 50Ω, 10 dB above Ref Loss 2.08—2.20 GHz 2.08—2.20 GHz 2.08—2.20 GHz 2.04—2.24 GHz 2.04—2.24 GHz 2.04—2.24 GHz deg deg deg deg deg deg — — — — — — — — — — — — ±0.5 ±1.0 ±1.5 ±1.0 ±1.5 ±2.0 Return Loss Over 10 dB Attenuation Range 2.04—2.24 GHz dB 15 — — Input IP3 Over 10 dB Attenuation Range 2.04—2.24 GHz dBm — +41 — Input P1dB Over 10 dB Attenuation Range 2.04—2.24 GHz dBm — +29 — Noise Figure Over 10 dB Attenuation Range 2.04—2.24 GHz dB — — Note 1 Switching Speed 50% Control to 10%/90% RF — ns — 500 — I Supply — — mA — — 100 1. Noise figure is approximately equal to the absolute attenuation. Recommended PCB Configuration Absolute Maximum Ratings2,3 Parameter Absolute Maximum Max. Input Power 1.5 t6 2.0 GHz Other Frequencies +34 dBm +24 dBm DC Voltages4 Vbias1 or Vbasis2 +1.0V DC Current 50 mA Max per Bias Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Note that external dropping resistors are required to limit the current and voltage on the PIN diodes. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAIA-007150-000100 Vector Modulator, 1.94 to 2.24 GHz Rev. V3 Phase and Attenuation of MAIA-007150-000100, Vector Modulator Linearized with MADR-007131-000100 Dual Linearizer5,6,7,8 Figure 1A (y) 90° 45° bias 1 = 0.0V 0.5V bias 2 = 5.0V 3.5V 3.0V 1.0V (x) 0° 2.5V 2.0V 1.5V 1.5V 1.0V 2.0V 2.5V 3.0V 3.5V bias 1 = 5.0V 0.5V bias 2 = 0.0V Figure 1B bias 1 = 0V bias 2 = +5V bias 1 = 0V bias 2 = 0V (y) 90° 45° (x) 0° Loss = 22 dB Loss = 17 dB bias 1 = +5V bias 2 = +5V Loss = 12 dB bias 1 = +5V bias 2 = 0V 3 Reflection coefficient = 0.5 5. Tic marks on x,y axes refer to reflection coefficient in increments of 0.1V. Reflection coefficients vary from -0.5 to +0.5 on both the x and y axes. 6. Data is for vector modulators driven by linearizers per attached schematic. 7. Inputs to the linearizers vary from 0 to 5V. 8. The phase with the inputs to both linearizers set to +5V is arbitrarily called zero degrees. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAIA-007150-000100 Vector Modulator, 1.94 to 2.24 GHz Rev. V3 Phase and Attenuation of MAIA-007150-000100 vs. Bias Current9,10 Figure 2A (y) 90° 45° bias 1 = 0 µA 4 µA bias 2 = 15 mA 9 µA 6.7 mA 17 µA 2.3 mA 33 µA 690 µA 62 µA 205 µA 112 µA 112 µA 205 µA 62 µA 690 µA 33 µA 2.3 mA 17 µA 6.7 mA 9 µA 15 mA 4 µA (x) 0° 0 µA Figure 2B bias 1 = 0 µA bias 2 = 0 µA (y) 90° bias 1 = 0 µA bias 2 = 15 mA 45° (x) 0° bias 1 = 15 mA bias 2 = 15 mA bias 1 = 15 mA bias 2 = 0 µA Reflection coefficient = 0.6 Reflection coefficient = 0.5 9. Tic marks on x,y axes refer to reflection coefficient in increments of 0.1. Reflection coefficients vary from -0.6 to +0.6 on both the x and y axes. 10.The phase with the inputs to both linearizers set to +15mA is arbitrarily called zero degrees. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAIA-007150-000100 Vector Modulator, 1.94 to 2.24 GHz Handling Procedures Rev. V3 Schematic with Off-Chip Components Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts. CSP-6, Lead-Free, 4 x 6 mm, 32-lead, PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.