Hybrid Aluminum Electrolytic Capacitors NSPE-Z Series • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • HIGH TEMPERATURE RANGE (+125°C) • LONG LIFE (4,000 HOURS) NEW • LOW ESR, HIGH RIPPLE CURRENT & LOW LEAKAGE HIGH TEMPERATURE & • 5x6.1 ~ 10x10.5mm CASE SIZES LONG LIFE • REFLOW SOLDERING RATED TO +260°C (ALL SIZES) • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C 25 ~ 63Vdc 10 ~ 330μF -55 ~ +125°C ±20% (M) Less than 0.01CV or 3μA whichever is greater W.V. (Vdc) S.V. (Vdc) Working and Surge Voltage Ratings Tan δ @ 120Hz/20°C Test Duration Capacitance Change Tan δ ESR Leakage Current Low Temperature ESR after endurance test ESR @ 100KHz/-40°C Load Life Test @ +125°C and Rated Voltage 25 32 0.14 35 50 44 63 0.12 0.10 All Case Sizes: 4,000 Hours Within ±30% of initial measured value Less than 200% of specified max. value Less than 200% of specified max. value Less than specified max. value 63 79 0.08 φ5x6.1 φ6.3x6.1 φ6.3x8 φ8x10.5 φ10x10.5 2.0Ω 1.4Ω 0.8Ω 0.4Ω 0.3Ω STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) NSPE-Z330M25V5X6.1NLBYF Case Size (D X L) mm 5X6.1 NSPE-Z560M25V6.3X6.1NLBYF 6.3X6.1 56 NSPE-Z101M25V6.3X8NLBYF 6.3x8 100 PART NUMBER Cap. Working Max. Tan δ Max. ESR (mΩ) (μF) Voltage 120Hz/20°C @ 100KHz/20°C 33 0.14 25 Max. Ripple Current (mA rms) @ 100KHz/125°C 80 550 Load Life Hours (+125°C) 4,000 0.14 50 900 4,000 0.14 30 1400 4,000 NSPE-Z221M25V8X10.5NLBYF 8x10.5 220 0.14 27 1600 4,000 NSPE-Z331M25V10X10.5NLBYF 10x10.5 330 0.14 20 2000 4,000 NSPE-Z220M35V5X6.1NLBYF 5X6.1 22 0.12 100 550 4,000 NSPE-Z470M35V6.3X6.1NLBYF 6.3X6.1 47 0.12 60 900 4,000 NSPE-Z680M35V6.3X8NLBYF 6.3x8 68 0.12 35 1400 4,000 NSPE-Z151M35V8X10.5NLBYF 8x10.5 150 35 0.12 27 1600 4,000 NSPE-Z271M35V10X10.5NLBYF 10x10.5 270 0.12 20 2000 4,000 NSPE-Z100M50V5X6.1NLBYF 5X6.1 10 0.10 120 500 4,000 NSPE-Z220M50V6.3X6.1NLBYF 6.3X6.1 22 0.10 80 750 4,000 NSPE-Z330M50V6.3X8NLBYF 6.3X8 33 0.10 40 1100 4,000 NSPE-Z680M50V8X10.5NLBYF 8X10.5 68 50 0.10 30 1250 4,000 NSPE-Z101M50V10X10.5NLBYF 10X10.5 100 0.10 28 1600 4,000 NSPE-Z100M63V6.3X6.1NLBYF 6.3X6.1 10 0.08 120 700 4,000 NSPE-Z220M63V6.3X8NLBYF 6.3X8 22 0.08 80 900 4,000 NSPE-Z330M63V8X10.5NLBYF 8X10.5 33 NSPE-Z560M63V10X10.5NLBYF 10X10.5 56 63 0.08 40 1100 4,000 0.08 30 1400 4,000 For Automotive Applications See Part Numbering System RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency Correction Factor 120Hz 1KHz 10KHz >100KHz 0.10 0.30 0.60 1.00 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Hybrid Aluminum Electrolytic Capacitors NSPE-Z Series PART NUMBER SYSTEM NSPE-Z 151 M 35V 8x10.5 N LB Y F Series RoHS Compliant Sn-Bi Finish, 15" Reel Reflow Temp. Code (N=+260°C) Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site DIMENSIONS (mm) Case Size 5x6.1 6.3x6.1 6.3x8 8x10.5 10x10.5 Dφ ±0.5 5 6.3 6.3 8.0 10 L max. 6.1 6.1 8.0 10.5 10.5 A, B ±0.2 5.3 6.6 6.6 8.3 10.3 W 0.55 ~ 0.75 0.55 ~ 0.75 0.55 ~ 0.75 0.7 ~ 1.1 0.7 ~ 1.1 + Dφ I I ±0.3 2.2 2.6 2.6 3.4 3.5 Part Marking P ±0.2 1.5 1.8 1.8 3.1 4.6 Polarity (Cathode) E ZC Series Code Voltage Code - I Capacitance 33 Date Code W VOLTAGE RATING CODES A L 0.3mm max. Code E V H J P B Voltage Rating 25V 35V 50V 63V LAND PATTERN DIM. (mm) Case Dia. 5 6.3 8 10 a 1.5 1.8 3.1 4.6 b 2.8 3.2 4.0 4.1 c 1.6 1.6 2.0 2.0 + c b a c PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-Z Series Temperature - Deg. C RECOMMENDED REFLOW SOLDERING PROFILE* Peak Temperature 260 230 Time Above 230°C (30 seconds max.) Time Above 217°C (40 seconds max.) 200 150 Time Above 200°C (70 seconds max.) 100 Preheat - +160°C for 120 seconds max. 50 Time (Seconds) PEAK TEMPERATURE AND DURATION Peak Time above Time above # of Reflow Time Temperature 230°C 217°C Passes +260°C >+250°C 5 sec. 2 φ5 ~ 6.3mm +255°C >+250°C 10 sec. 2 30 sec. max. 40 sec. max. +260°C >+250°C 5 sec. 1 φ8 ~ 10mm >+240°C 10 sec. 2 +245°C *Two reflow passes are permissible with a cool down to room temperature required between the first and second pass. Acceptable soldering methods are IR or IR & heated air. Diameter TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 4 + 0.1 3. Connection: Maximum 3 connections (slices) per reel. D ±0.1 5.5 7.5 7.5 11.5 11.5 P ±0.1 12.0 12.0 12.0 16.0 16.0 T ±0.2 6.4 6.4 8.5 11.0 11.0 t max. 0.4 0.4 0.4 0.4 0.4 5x6.1 6.3x6.1 6.3x8 8x10.5 10x10.5 W ±1.0 14 18 18 26 26 + A P Feeding T 2mm ± 0.5mm REEL DIMENSIONS (mm) Case Size - B C ±0.3 12.0 16.0 16.0 24.0 24.0 D B ±0.5 5.7 7.0 7.0 8.7 10.7 t Qty per Reel 15" (380mm) 1,000 1,000 900 500 500 φ13mm ± 0.5mm φ50mm min. 5x6.1 6.3x6.1 6.3x8 8x10.5 10x10.5 A ±0.5 5.7 7.0 7.0 8.7 10.7 1.75 ± C Case Size 1.75 + 0.15 1.5∅ +0.1/1.5φ+0.1/-0 φ21mm ± 0.8mm φ380mm ± 2.0mm NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com W www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE 3mm www.SMTmagnetics.com 3