M61518FP
Audio Signal Processor with Rec/Play Back Amplifier
REJ03F0205-0201
Rev.2.01
Mar 31, 2008
Description
The M61518FP is an audio signal processor suitable for the mini component system with the cassette tape.
The circuit includes Selector for selecting input source, REC/Play back amp., Tone control and 2ch Electronic Volume.
Features
• Input selector
Built-in 3 Input selector + Tape Input
• Play Back Amp.
Built-in Low noise P. B Amp
• REC Amp.
Built-in Low noise REC Amp (Mute function built-in)
• Tone Control
Bass/Mid/Treble –10 to +10 dB/2 dB step
• Electronic Volume with high voltage transistor
0 to –86 dB, –∞ dB
(Input Vol: 0 to –70 dB, –∞ dB)
(Output Vol: +18 to +2 dB)
Application
Mini Stereo, Receiver, etc.
Recommended Operating Conditions
Recommended supply voltage:
VCC = 4.5 V (Typ), VEE = –4.5 V (Typ)
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 1 of 15
M61518FP
System Block Diagram
OUT1
GND
VCC
VEE
Bias
PH
RH
REC EQ.
Rec mute SW
–
+
TP
1
IN1 2
3
+
–
TP
Tone
(Bass/Mid/Tre)
TP
P.B EQ.
Input Vol
0 dB to –70 dB
TP
+10 dB
MD Rec in 1 Mic 1
+10 dB
MD Rec in 2 Mic 2
TP
Output Vol
+18 dB to +2 dB
µ-COM
Interface
Output Vol
0 dB to –70 dB
+18 dB to +2 dB
1
IN2 2
3
TP
Input Vol
P.B EQ.
–
+
+
–
TP
–
+
Tone
(Bass/Mid/Tre)
+
–
TP
Rec mute SW
PH
REC EQ.
RH
Bias
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 2 of 15
OUT2
M61518FP
Block Diagram And Pin Configuration (Top View)
1
PB1P
2
TP TP
TP
+
–
3
PB2N
4
PB1O
6
VOLIN1
7
VOLIN2
8
GND
9
10
TREO1
11
TREI2
12
TREO2
13
35
REC1N
34
REC2N
33
REC2O
32
INC2
31
INC1
30
INB2
29
INB1
28
INA2
27
INA1
26
OUT1
25
OUT2
24
BASO2
23
BAS2
22
BASO1
21
BAS1
20
VEE
19
CONT
TP
TP
PBamp
(2ch)
Input Vol (1ch)
Input Vol (2ch)
GND
TREI1
REC1O
+
–
5
Rec amp
(2ch)
TP
TP
+10 dB
PB2O
PBamp
(1ch)
36
–
+
+10 dB
PB2P
Rec amp
(1ch)
TP
+
–
PB1N
Output Vol (1ch)
+
–
Tre1
+18 dB
to +2 dB
Output Vol (2ch)
+
–
+18 dB
to +2 dB
Tre2
Bass2
MIDI1
14
MIDO1
15
Mid1
Bass1
MIDI2
16
Mid2
MIDO2
VDD
17
VEE
18
VDD
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 3 of 15
µ-COM
Interface
M61518FP
Pin Description
Pin No.
1, 4
2, 3
5, 6
7, 8
9
10, 11, 12, 13
14, 15, 16, 17
18
19
20
21, 22, 23, 24
25, 26
27, 28
29, 30
31, 32
33, 34
35, 36
Name
PB1N, PB2N
PB1P, PB2P
PB1O, PB2O
VOLIN1, VOLIN2
GND
TREI, TREO
MIDI, MIDO
VDD
CONT
VEE
BASI, BASO
OUT1, OUT2
INA1, INA2
INB1, INB2
INC1, INC2
REC1O, REC2O
REC1N, REC2N
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 4 of 15
Function
Input pin of PB amp (Negative)
Input pin of PB amp (Positive)
Output pin of PB amp
Input pin of volume
GND pin
Frequency setting pin in the tone control (Tre)
Frequency setting pin in the tone control (Mid)
Positive power supply
Microcomputer data Input pin
Negative supply pin
Frequency setting pin in the tone control (Bass)
Output pin
Selector A Input pin
Selector B Input pin
Selector C Input pin
Output pin of REC amp
Input pin of REC amp
M61518FP
Absolute Maximum Ratings
Item
Plus and minus power supply
difference
Power dissipation
Thermal derating
Operating temperature
Storage temperature
Note:
Symbol
Ratings
Unit
VDD-VEE
+10.5
V
1080
10.8
–20 to +75
–40 to +125
mW
mW/°C
°C
°C
Pd
Kθ
Topr
Tstg
Condition
Ta ≤ 25°C
Ta > 25°C* Circuit board
Circuit board
Print circuit board size: 70 mm × 70 mm
Print circuit board thickness: 1.6 mm
Print circuit board quality of the material: Glass epoxy
Single Cu pattern
Thickness of Cu: 18 µm
Pattern size of Cu: 0.25 mm (Width) × 25 mm (Length) / Lead
Thermal Deratings
(Maximum Rating)
Power Dissipation Pd (mW)
1500
1080 mW
1000
540 mW
500
0
0
25
50
75
100
125
150
Ambient Temparature Ta (°C)
Recommended Operating Conditions
(Ta = 25°C unless otherwise noted)
Item
Positive supply voltage
Negative supply voltage
Symbol
VDD
VEE
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 5 of 15
Min
4.25
–4.75
Typ
4.5
–4.5
Max
4.75
–4.25
Unit
V
V
M61518FP
Serial Data Control Format
(1) Signal wave shape
(CLOCK, DATA, STROBE)
Threshold of the internal DATA (H/L)
Dn + 0
Dn + 1
Dn + 10
Threshold of the internal STROBE
Dn + 11
tcr
H
4.5 V
M
4.5 V
2.25 V
L
0V
DATA: L
DATA: H
tWH
Threshold of the internal CLOCK
tWH
tr
tf
tr
tWL
tf
tWH
tr
The internal DATA latch at the falling edges of this clock signal.
(2) Control signal voltage regulation
Digital signal
L signal
M signal
H signal
L
M
H
Condition
VDD = 4.5 V, VEE = –4.5 V
VDD = 4.5 V, VEE = –4.5 V
VDD = 4.5 V, VEE = –4.5 V
Min
Limits
Typ
Max
Unit
GND
0.3 × VDD
0.8 × VDD
—
0.5 × VDD
—
0.2 × VDD
0.7 × VDD
VDD
V
Min
Limits
Typ
Max
Unit
4
1.6
1.6
—
—
—
—
—
—
—
—
—
—
0.4
0.4
µs
(3) Control signal timing regulation
Item
Cycle time of the digital signal
Pulse width of the digital signal ("H" level)
Pulse width of the digital signal ("L" level)
Rising time of digital signal
Falling time of digital signal
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 6 of 15
Symbol
tcr
tWH
tWL
tr
tf
M61518FP
Data Control Specification
(1) Data input address
Notes: 1. The interval of data transmission from the micro controller is over 0.1 s.
This is waiting time for soft-switching to reduce the shock noise.
2. Input only the control data at slot0 (slot1).
(MSB) ← Input direction
D140 D130 D120 D110 D100
Selector
Karaoke
D141 D131 D121 D111 D101
Tone control
Bass
D90
D80
D70
D60
D50
D40
Input volume
D91
D81
Tone control
Mid
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 7 of 15
D71
D61
D30
D20
D10
Output volume
D51
D41
Tone control
Treble
D31
D00
0
D21
D11
D01
REC
Mute
0
1
slot0
slot1
M61518FP
Initial setting
Output Volume Control
+18 dB
+16 dB
+14 dB
+12 dB
+10 dB
+8 dB
+6 dB
+4 dB
+2 dB
Note:
D40
0
0
0
0
0
0
0
0
1
Karaoke Control
D30
0
0
0
0
1
1
1
1
0
D20
0
0
1
1
0
0
1
1
0
D10
0
1
0
1
0
1
0
1
0
Stereo
Mono 1
Mono 2
Mono 1 + 2
D110
0
0
1
1
Selector Control
Do not input other date than the above.
Input Volume Control
Selector
TP
IN A
IN C
D140
0
0
0
D130
0
0
1
D120
0
1
0
IN B
IN mute
Supply OFF
0
1
1
1
1
1
1
1
0
D90
D80
D70
D60
D50
0 dB
–2 dB
0
0
0
0
0
0
0
0
0
1
Note:
–4 dB
–6 dB
–8 dB
–10 dB
–12 dB
–14 dB
–16 dB
–18 dB
–20 dB
–22 dB
–26 dB
–30 dB
–34 dB
–38 dB
–42 dB
–46 dB
–50 dB
–54 dB
–58 dB
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
REC Mete Control
–62 dB
–66 dB
–70 dB
–∞ dB
1
1
1
1
0
0
0
1
1
1
1
1
0
1
1
1
1
0
1
1
Note:
Do not input other date than the above.
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 8 of 15
D100
0
1
0
1
Do not input other date than the above.
REC MUTE
OFF
ON
D21
0
1
Tone Control
Bass
Mid
Treble
+10 dB
+8 dB
+6 dB
+4 dB
+2 dB
0 dB
–2 dB
–4 dB
–6 dB
–8 dB
D141
D101
D61
0
0
0
0
0
0
1
1
1
1
D131
D91
D51
1
1
0
0
0
0
0
0
0
1
D121
D81
D41
0
0
1
1
0
0
0
1
1
0
D111
D71
D31
1
0
1
0
1
0
1
0
1
0
–10 dB
1
1
0
1
Note:
Do not input other date than the above.
M61518FP
Power Off Setting Data
It's necessary to set up the Power off setting data when power off before 0.1 s.
Power off setting data reduce the power off shock noise.
Power off setting data
(MSB) ← Input direction
D140 D130 D120 D110 D100
1
1
Note:
D80
D70
D60
D50
1
1
1
1
1
*
0
Selector
D90
Karaoke
Input volume (–∞ dB)
Karaoke is same data before the Power off setting.
Output volume is same data before the Power off setting.
Selector Control
Selector
TP
IN A
IN C
IN B
IN mute
Supply off
Note:
D140
D130
D120
0
0
0
0
1
1
0
0
1
1
1
1
0
1
0
1
1
0
Do not input other date than the above.
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 9 of 15
D40
D30
D20
*
Output volume
D10
D00
0
slot0
M61518FP
Electrical Characteristics
Ta = 25°C, VDD = 4.5 V, VEE = –4.5 V, f = 1 kHz, Vi = 100 mVrms, Input Vol = 0 dB, Output Vol = 18 dB,
Bass = 0 dB, Mid = 0 dB, Treble = 0 dB, RL = 10 kΩ unless otherwise noted.
Symbol
Min
Limits
Typ
Max
Unit
Condition
—
–20
8
16
2.2
2.2
1.4
—
10
–10
10
18
2.4
2.4
1.6
0.02
20
—
12
20
—
—
—
0.08
mA
mA
dB
dB
Vrms
Vrms
Vrms
%
No Input signal
No Input signal
INA/B/C (Pin 27 to 32) → PBP (Pin 5, 6)
VOLIN (Pin 7, 8) → OUT (Pin 25, 26)
OUT (Pin 25, 26), THD = 1%
RECO (Pin 33, 36), THD = 1 %
PBO (Pin 5, 6), THD = 1%
Distortion
IDD
IEE
Gv1
Gv2
VOM1
VOM2
VOM3
THD
Output noise voltage
VON1
—
6
15
VON2
—
35
70
Input conversion noise voltage
VIN
—
1.0
1.9
Channel cross talk
CT
—
–70
–60
Input impedance
Maximum attenuation
Rvin
Volmin
14
—
20
–95
26
–90
Boost amount (Bass)
GBB
7
10
13
Cut amount (Bass)
GBC
–13
–10
–7
Boost amount (Mid)
GMB
7
10
13
Cut amount (Mid)
GMC
–13
–10
–7
Boost amount (Treble)
GTB
7
10
13
Cut amount (Treble)
GTC
–13
–10
–7
Item
Positive power current
Negative power current
Pass gain
Maximum output voltage
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 10 of 15
INA/B/C (Pin 27 to 32) → OUT (Pin 25,
26), Vo = 0.5 Vrms, BW = 400 to 30 kHz
µVrms VOLIN (Pin 7, 8) → OUT (Pin 25, 26)
Input VOL = –∞ dB, Output VOL = 2 dB,
JIS-A, Rg = 0 Ω
µVrms VOLIN (Pin 7, 8) → RECO (Pin 33, 36)
JIS-A, Rg = 0 Ω
µVrms PB1P/2P (Pin 2, 3) → PBO (Pin 5, 6)
JIS-A, Rg = 0 Ω
dB
INA/B/C (Pin 27 to 32) → OUT (Pin 25,
26), Vo = 2 Vrms, JIS-A, Rg = 0 Ω
kΩ
VOLIN (Pin 7, 8)
dB
VOLIN (Pin 7, 8) → OUT (Pin 25, 26),
JIS-A, Input VOL = –∞ dB, Output VOL
= 2 dB, Vo = 2 Vrms
dB
OUT (Pin 25, 26), Vo = 0.5 Vrms (Bass:
0 dB), Bass: 10 dB, f = 100 Hz
dB
OUT (Pin 25, 26), Vo = 0.5 Vrms (Bass:
0 dB), Bass: –10 dB, f = 100 Hz
dB
OUT (Pin 25, 26), Vo = 0.5 Vrms (Mid: 0
dB), Mid: 10 dB, f = 1 kHz
dB
OUT (Pin 25, 26), Vo = 0.5 Vrms (Mid: 0
dB), Mid: –10 dB, f = 1 kHz
dB
OUT (Pin 25, 26), Vo = 0.5 Vrms (Tre: 0
dB), Tre: 10 dB, f = 10 kHz
dB
OUT (Pin 25, 26), Vo = 0.5 Vrms (Tre: 0
dB), Tre: –10 dB, f = 10 kHz
M61518FP
P. B. Amp Measurement Circuit Figure
To 2ch P.B amp
TP
+
TP
–
10 k
10 k
TP
TP
31
29
27
2
10 k
1
6
10 µ
390 k
6800 p
Audio Analyzer
18 k
10 k
1.2 k
1 kHz 68
10 µ
470 p
Input Conversion Noise Voltage
• Limits
Typ: 1.0 µVrms (JIS-A)
Max: 1.9 µVrms (JIS-A)
• Measurement method
(1) Input signal (1 kHz) to PB1P (pin2) and measure output gain of PB1O (pin6).
(2) Measure output noise voltage of PB1O (pin6) and convert Input conversion noise voltage from output noise
voltage.
Maximum Output Voltage
• Limits
Min: 1.4 Vrms (THD = 1%)
Typ: 1.6 Vrms (THD = 1%)
• Measurement method
Input signal (1 kHz) to PB1P (pin2) and measure output gain of PB1O (pin6) when output THD is 1%.
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 11 of 15
M61518FP
Rec Amp Measurement Circuit Figure
Rec mute SW
to vol
+
–
7
35
36
470 p
2.2 k
Audio Analyzer
10 k
1 kHz
1.8 k
4700 p
10 µ
15 k
2.7 k
680
0.01 µ
Output noise voltage
• Limits
Typ: 35 µVrms (JIS-A)
Max: 70 µVrms (JIS-A)
• Measurement method
Measure output noise voltage of REC1O (pin36) when VOLIN1 (pin7) is GND.
Maximum output voltage
• Limits
Min: 2.2 Vrms (THD = 1%)
Typ: 2.4 Vrms (THD = 1%)
• Measurement method
Input signal (1 kHz) to VOLIN1 (pin7) and measure output gain of REC1O (pin36) when output THD is 1%.
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 12 of 15
M61518FP
Tone Control Equivalent Circuit
Bass, Mid, Treble Circuit composition is common
(1) Boost equivalent circuit
1
f0 =
2π
IN
(HZ)
R1 (R2 + R3) C1C2
+
OUT
Q≈
–
R3
1
C1 + C2
C1C2R2
R1
R2
(In the case of C1 = C2)
22
21
BASO1
BASI1
Gv = 20 Iog
R2 + R3
+2
R1
R3
+2
R1
(dB)
C2
C1
R1
R2, R3 Standard value (Reference)
Gain
Resistance
(kΩ)
2 dB
10.46
26.79
R2
R3
4 dB
18.77
18.48
6 dB
25.36
11.89
8 dB
30.61
6.64
10 dB
34.77
2.48
(2) Cut equivalent circuit
1
f0 =
2π
–
IN
OUT
+
R2
Q≈
R3
1
C1 + C2
C1C2R2
R1
(in the case of C1 = C2)
21
22
BASI1
BASO1
C2
Gv = 20 Iog
C1
R2, R3 Standard value (Reference)
R2
R3
–2 dB
10.46
26.79
–4 dB
18.77
18.48
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 13 of 15
–6 dB
25.36
11.89
R3
+2
R1
R2 + R3
+2
R1
R1
Gain
Resistance
(kΩ)
(HZ)
R1 (R2 + R3) C1C2
–8 dB
30.61
6.64
–10 dB
34.77
2.48
(dB)
M61518FP
Application Example
RH
Rec Head
10 µ
1
47 p
PB Head
TP TP
TP
2
36
Rec amp
(1ch)
TP
+
–
82
2.2 k
1k
180 p
10 k 0.01 µ
2.2 k
35
6800 p
1k
1k
PH
10 µ
6800 p
390 k
4
470 p
32
TP
5
INC2
3.3 k
INC1
3.3 k
INB2
30
Rec Head
3.3 k
4.7 k
29
7
Input Vol (1ch)
1µ
4.7 k
3.3 k
9
Input Vol (2ch)
GND
10
26
+
–
+18 dB
to +2 dB
11
0.001 µ
10 k
0.1 µ
24
Bass2
0.1 µ
14
6.8 k
23
Mid1
0.01 µ
0.1 µ
15
22
Bass1
0.01 µ
0.1 µ
16
6.8 k
21
Mid2
0.01 µ
17
4.5 V
OUT2
10 µ
Tre2
0.01 µ
6.8 k
OUT1
25
13
6.8 k
10 k
+18 dB
to +2 dB
12
0.001 µ
6.8 k
10 µ
3.3 k
Output Vol (2ch)
Tre1
0.001 µ
INA1
27
Output Vol (1ch)
+
–
0.001 µ
6.8 k
INA2
3.3 k
1µ
22 k
INB1
28
8
22 k
22 k
31
PBamp
(2ch)
6
Mic1
Mic2
1k
TP
+10 dB
18 k
22 k
2.2 k
390 k
470 p
18 k
2.2 k
10 k 0.01 µ
33
+
–
1.2 k
1.2 k
180 p
47 p
6800 p
82
TP
TP
3
Rec amp
(2ch)
RH
PH
PB Head
6800 p
34
PBamp
(1ch)
+
–
+
–
+10 dB
18
VEE
VDD
µ-COM
Interface
20
19
–4.5 V
µ-COM
Unit: Resistance Ω
: Capacity
F
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 14 of 15
M61518FP
Package Dimensions
JEITA Package Code
P-SSOP36-8.4x15-0.80
RENESAS Code
PRSP0036GA-B
Previous Code
36P2R-D
MASS[Typ.]
0.5g
E
19
*1
HE
36
F
NOTE)
1. DIMENSIONS "*1" AND "*2"
DO NOT INCLUDE MOLD FLASH.
2. DIMENSION "*3" DOES NOT
INCLUDE TRIM OFFSET.
18
1
Index mark
c
D
A
*2
A2
y
*3
bp
L
e
A1
Detail F
REJ03F0205-0201 Rev.2.01 Mar 30, 2008
Page 15 of 15
Reference Dimension in Millimeters
Symbol
D
E
A2
A
A1
bp
c
HE
e
y
L
Min Nom Max
14.8 15.0 15.2
8.2 8.4 8.6
2.05
2.35
0
0.1 0.2
0.3 0.35 0.45
0.18 0.2 0.25
0°
8°
11.63 11.93 12.23
0.65 0.8 0.95
0.10
0.3 0.5 0.7
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2377-3473
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2008. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2