Marketing Bulletin DATE: May 1st, 2008 TO: All Sales Personnel FROM: Isaac Gonzalez RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective May 1st, 2008: Series Description EC1SM Resistance Welded Short HC-49/UP SMD Crystal EC2SM Resistance Welded HC-49/UP SMD Crystal Recommended Replacement E1S Series E2S Series In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 1st, 2009, with delivery to conclude by December 31st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 EC1SM Series EC1SM • HC-49/UP short package • AT or BT cut available • Resistance weld seal • Tight tolerance/stability • Tape and reel available H 3.20 L 13.30 W 4.85 CRYSTAL NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 3.579545MHz to 50.000MHz Frequency Tolerance / Stability ±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm (AT cut only), ±15ppm / ±30ppm (AT cut only), Over Operating Temperature Range ±15ppm / ±20ppm (AT cut only), or ±10ppm / ±15ppm (AT cut only) Operating Temperature Range 0°C to 70°C (Standard), -20°C to 70°C (AT cut only), or -40°C to 85°C (AT cut only) Aging (at 25°C) ±5ppm / year Maximum Storage Temperature Range -40°C to 85°C Shunt Capacitance 7pF Maximum Insulation Resistance 500 Megaohms Minimum at 100VDC Drive Level 1 mWatt Maximum Load Capacitance (CL) 18pF (Standard), Custom CL ≥10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range ESR (Ω) Mode / Cut Frequency Range ESR (Ω) Mode / Cut 3.579545MHz to 4.999MHz 200 Max Fundamental / AT 15.000MHz to 15.999MHz 60 Max Fundamental / AT 5.000MHz to 5.999MHz 150 Max Fundamental / AT 16.000MHz to 23.999MHz 50 Max Fundamental / AT 6.000MHz to 7.999MHz 120 Max Fundamental / AT 24.000MHz to 30.000MHz 40 Max Fundamental / AT 8.000MHz to 8.999MHz 90 Max Fundamental / AT 24.000MHz to 40.000MHz 40 Max Fundamental / BT 9.000MHz to 9.999MHz 80 Max Fundamental / AT 28.6363MHz to 29.999MHz 150 Max Third Overtone / AT 10.000MHz to 14.999MHz 70 Max Fundamental / AT 30.000MHz to 50.000MHz 100 Max Third Overtone / AT MANUFACTURER CATEGORY SERIES ECLIPTEK CORP. CRYSTAL EC1SM 800-ECLIPTEK www.ecliptek.com for latest revision PACKAGE HC-49/UP Short CLASS REV.DATE CR21 03/06 Specifications subject to change without notice. PART NUMBERING GUIDE EC1SM A - T - 20 - 30.000M TR PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY TOLERANCE / STABILITY Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C A=±50ppm at 25°C, ±100ppm from -20°C to 70°C B=±50ppm at 25°C, ±100ppm from -40°C to 85°C C=±30ppm at 25°C, ±50ppm from 0°C to 70°C D=±30ppm at 25°C, ±50ppm from -20°C to 70°C E=±30ppm at 25°C, ±50ppm from -40°C to 85°C F=±15ppm at 25°C, ±30ppm from 0°C to 70°C G=±15ppm at 25°C, ±30ppm from -20°C to 70°C H=±15ppm at 25°C, ±30ppm from -40°C to 85°C J=±15ppm at 25°C, ±20ppm from 0°C to 70°C K=±15ppm at 25°C, ±20ppm from -20°C to 70°C L=±15ppm at 25°C, ±20ppm from -40°C to 85°C M=±10ppm at 25°C, ±15ppm from 0°C to 70°C N=±10ppm at 25°C, ±15ppm from -20°C to 70°C FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT, B=Fundamental / BT T=Third Overtone / AT OBSOLETE MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Coplanarity: 0.36mm Maximum Tolerances = ±0.2 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A B 24±.3 C 11.5±.1 1 0.75±.1 D E 4 ±.2 2±.1 F G H J K 12±.2 B0* 1.5 +.1 A0* .4±.1 REEL 1. L K0* M N O P Q 5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 R S T U V 2.5 MIN 10 MIN 30.4 MAX 360 MAX 24.4+2-0 *Compliant to EIA-481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: E XX.XXX M M or Blank (No Marking) Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS ECLIPTEK CORP. CRYSTAL EC1SM HC-49/UP Short CR21 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 03/06 Specifications subject to change without notice. EC2SM Series EC2SM • HC-49/UP package • AT or BT cut available • Resistance weld seal • Tight tolerance/stability • Tape and reel available H 4.50 L 13.30 W 4.85 CRYSTAL NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 3.579545MHz to 50.000MHz Frequency Tolerance / Stability ±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm (AT cut only), ±15ppm / ±30ppm (AT cut only), Over Operating Temperature Range ±15ppm / ±20ppm (AT cut only), or ±10ppm / ±15ppm (AT cut only) Operating Temperature Range 0°C to 70°C (Standard), -20°C to 70°C (AT cut only), or -40°C to 85°C (AT cut only) Aging (at 25°C) ±5ppm / year Maximum Storage Temperature Range -40°C to 85°C Shunt Capacitance 7pF Maximum Insulation Resistance 500 Megaohms Minimum at 100VDC Drive Level 1 mWatt Maximum Load Capacitance (CL) 18pF (Standard), Custom CL ≥10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range ESR (Ω) Mode / Cut Frequency Range ESR (Ω) Mode / Cut 3.579545MHz to 4.999MHz 200 Max Fundamental / AT 15.000MHz to 15.999MHz 60 Max Fundamental / AT 5.000MHz to 5.999MHz 150 Max Fundamental / AT 16.000MHz to 23.999MHz 50 Max Fundamental / AT 6.000MHz to 7.999MHz 120 Max Fundamental / AT 24.000MHz to 30.000MHz 40 Max Fundamental / AT 8.000MHz to 8.999MHz 90 Max Fundamental / AT 24.000MHz to 40.000MHz 40 Max Fundamental / BT 9.000MHz to 9.999MHz 80 Max Fundamental / AT 28.6363MHz to 29.999MHz 150 Max Third Overtone / AT 10.000MHz to 14.999MHz 70 Max Fundamental / AT 30.000MHz to 50.000MHz 100 Max Third Overtone / AT MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC2SM HC-49/UP CR03 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC2SM A - T - 20 - 30.000M TR PACKAGING OPTIONS Blank=Bulk, TR=Tape and Reel FREQUENCY TOLERANCE / STABILITY Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C A=±50ppm at 25°C, ±100ppm from -20°C to 70°C B=±50ppm at 25°C, ±100ppm from -40°C to 85°C C=±30ppm at 25°C, ±50ppm from 0°C to 70°C D=±30ppm at 25°C, ±50ppm from -20°C to 70°C E=±30ppm at 25°C, ±50ppm from -40°C to 85°C F=±15ppm at 25°C, ±30ppm from 0°C to 70°C G=±15ppm at 25°C, ±30ppm from -20°C to 70°C H=±15ppm at 25°C, ±30ppm from -40°C to 85°C J=±15ppm at 25°C, ±20ppm from 0°C to 70°C K=±15ppm at 25°C, ±20ppm from -20°C to 70°C L=±15ppm at 25°C, ±20ppm from -40°C to 85°C M=±10ppm at 25°C, ±15ppm from 0°C to 70°C N=±10ppm at 25°C, ±15ppm from -20°C to 70°C FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT, B=Fundamental / BT T=Third Overtone / AT OBSOLETE MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Tolerances = ±0.2 Coplanarity: 0.36mm Maximum TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A B C D E 24±.3 11.5±.1 10.75±.1 4 ±.2 2±.1 REEL M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 F G H J K L R S T U V 12±.2 B0* 1.5 +.1 A0* .4±.1 K0* 2.5 MIN 10 MIN 30.4 MAX 360 MAX 24.4+2-0 *Compliant to EIA-481A MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 Line 1: E XX.XXX M M or Blank (No Marking) Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC2SM HC-49/UP CR03 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.