LD2500 – LD2506 W TE PO WE R SEM IC O ND U C TO RS 25A 10mm LUCAS TYPE PRESS-FIT DIODE Features ! Diffused Junction ! ! ! ! Low Leakage Low Cost High Surge Current Capability Typical IR less than 20µA C Mechanical Data ! ! ! ! ! Case: All Copper Case and Components Hermetically Sealed Terminals: Contact Areas Readily Solderable Polarity: Cathode to Case(Reverse Units Are Available Upon Request and Are Designated By An “R” Suffix, i.e. LD2502R or LD2504R) Polarity: Red Color Equals Standard, Black Color Equals Reverse Polarity Mounting Position: Any 10mm Lucas Dim Min Max A 10.13 10.18 B 8.89 9.4 C 1.27 1.35 D 29.84 — All Dimensions in mm D B A Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TA = 150°C LD2500 LD2501 LD2502 LD2503 LD2504 LD2505 LD2506 Unit VRRM VRWM VR 50 100 200 300 400 500 600 V VR(RMS) 35 70 140 210 280 350 420 V IO 25 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 400 A Forward Voltage @IF = 50A VFM 1.05 V Peak Reverse Current At Rated DC Blocking Voltage @TA = 25°C @TA = 100°C IRM 20 500 µA Cj 300 pF RJC 1.0 K/W TJ, TSTG -65 to +175 °C Typical Junction Capacitance (Note 1) Typical Thermal Resistance Junction to Case (Note 2) Operating and Storage Temperature Range *Glass passivated forms are available upon request Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance: Junction to case, single side cooled. LD2500 – LD2506 1 of 2 © 2002 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity LD2500 Press Fit 100 Units/Tray LD2501 Press Fit 100 Units/Tray LD2502 Press Fit 100 Units/Tray LD2503 Press Fit 100 Units/Tray LD2504 Press Fit 100 Units/Tray LD2505 Press Fit 100 Units/Tray LD2506 Press Fit 100 Units/Tray Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com LD2500 – LD2506 We power your everyday. 2 of 2 © 2002 Won-Top Electronics